nsx_60_cli
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
vShield Command Line Interface Reference<br />
write erase<br />
Resets the CLI configuration to factory default settings.<br />
Synopsis<br />
write erase<br />
CLI Mode<br />
Privileged<br />
Example<br />
manager# write erase<br />
write memory<br />
Writes the current configuration to memory. This command is identical to the write command.<br />
Synopsis<br />
write memory<br />
CLI Mode<br />
Privileged, Configuration, and Interface Configuration<br />
Example<br />
manager# write memory<br />
Related Commands<br />
write<br />
NSX Edge Commands<br />
This section describes NSX Edge CLI commands.<br />
clear nat counters<br />
Resets NAT counters to zeros.<br />
Synopsis<br />
clear nat counters<br />
CLI Mode<br />
Privileged, Configuration, and Interface Configuration<br />
clear arp WORD<br />
Deletes an ARP entry from the ARP table, which is associated with the specified IP address.<br />
Synopsis<br />
clear arp WORD<br />
CLI Mode<br />
Privileged<br />
clear service dhcp lease<br />
Removes DHCP lease information from the DHCP service.<br />
30 VMware, Inc.