EN electrical test equipment

Overview
Model AM-500-EUR Hexagon 110 Hexagon 120 Hexagon 340 37 XR-A 38 XR-A
Display Digits 3 1 / 2
digit, 1999 digits 3¾ digit, 4000 digits 3¾ digit, 4000 digits ¾ digit, 5000 digits 4 digit, 9999 digits 4 digit, 9999 digits
True-RMS measurement AC AC AC+DC
Bar graph • • •
Ranges
Voltage AC 1 mV... 600 V 0.1 mV... 1000 V 0.1 mV... 1000 V 0.01 mV... 1000 V 0.1 mV... 750 V 0.1 mV... 750 V
Basic Accuracy* (1.0% + 3D) (1.5% + 5D) (1.5% + 5D) (0.5% + 3D) (1.2% + 10D) (1.2% + 10D)
Frequency 45...400 Hz 50...500 Hz 50...500 Hz 40 Hz...20 kHz 45 Hz...2 kHz 45 Hz...2 kHz
Voltage DC 1 mV... 600 V 0.1 mV... 1000 V 0.1 mV... 1000 V 0.01 mV... 1000 V 0.1 mV... 1000 V 0.1 mV... 1000 V
Basic Accuracy* (0.8% + 3D) (0.3% + 4D) (0.3% + 4D) (0.08% + 2D) (0.1% + 5D) (0.25% + 5D)
Current AC 0.1 µA...10 A
0.1 µA…10 A
(20A for 30 s)
0.1 µA…10 A
(20A for 30 s)
0.1 µA…10 A
(20A for 30 s) 0.01 µA... 10 A 0.01 µA... 10 A
Basic Accuracy* (1.5% + 3D) (1.5% + 4D) (1.5% + 4D) (0.6% + 3D) (1.5% + 10D) (1.5% + 20D)
Frequency 45...400 Hz 50 Hz...500 Hz 50...500 Hz 40 Hz…1 kHz 45 Hz...1 kHz 45 Hz...1 kHz
Current DC 0.1 µA...10 A
0.1 µA…10 A
(20A for 30 s)
0.1 µA…10 A
(20A for 30 s)
0.1 µA…10 A
(20A for 30 s) 0.01 µA... 10 A 0.01 µA... 10 A
Basic Accuracy* (1.2% + 3D) (1.2% + 3D) (1.2% + 3D) (0.2% + 4D) (0.5% + 10D) (0.5% + 10D)
Resistance 1Ω…20 MΩ 0.1Ω…40 MΩ 0.1Ω…40 MΩ 0.01Ω…50 MΩ 0.1Ω…40 MΩ 0.1Ω…40 MΩ
Diode and continuity test • • • • • •
Capacitance 0.01 nF…3000 µF 0.01 nF... 3000 µF 0.01 nF... 9999 µA 0.01 nF... 400.0 µF 0.01 nF... 400.0 µF
Frequency 5 Hz…1 MHz 5 Hz…1 MHz 5 Hz…125 kHz 3.00Hz...10MHz 3.00Hz...10MHz
Temperature -20…+300 °C -50…+1000 °C -20...+1300°C
Range selection
Automatic • • • •
Manual • • • •
Data Hold • • • •
Min/max value memory Max Hold Max Hold • • •
Peak Hold • • •
Relative measurement • • • • •
Data logger/interface - / RS-232 - / RS-232 - / RS-232
Auto Power Off • • • • •
Battery 1 x 9 V 2 x 1.5 V 2 x 1.5 V 1 x 9 V 1 x 9 V 1 x 9 V
Measurement Category CAT III/600 V
CAT III/600V,
CAT II/1000 V
CAT III/600 V,
CAT II/1000 V
CAT IV/600 V,
CAT III/1000 V
CAT III/600V, CAT II/1000V CAT III/600V, CAT II/1000V
Features Battery test,
1.5 V/9 V
Acoustic warning signal for
incorrect jack connection
Acoustic warning signal for
incorrect Jack connection
incl. temperature probe
RS-232 interface
Illuminated display
Calibration and adjustment
without opening the device
Software optionally available
Inductance measurement
Acoustic warning signal in
case of incorrect jack connection
logic test
Magnetic hanger
(MagneGrip TM )
Current loop measurement
(4….20mA) Software
optionally available
Magnetic hanger
(MagneGrip TM )
* = Basic accuracy figures are with regard to the best level of accuracy of the relevant measurement function
25