Datasheet TS32 V0509.pdf - TML working solutions

TECHNICAL DATA
Telescopic stroke: 3.200 mm
Reach up to tool point:
- retracted: 7.800 mm (*)
- extended: 11.000 mm (*)
Overall weight of the telescopic boom,
without tool: approx. 8.000 kg
* dependent upon carrier
Due to technical development, modifications are reserved without notice!
Telescopic Boom TS32
TS = collapsible, with two rocking axes
V05/09

Cradle / Telescopic boom
The telescopic boom is built of high tensile, wear and temperature resistant steel and is of triangular section consisting
of the outer boom (main boom) and the inner boom. The telescopic boom is designed and manufactured specifically for
the tough and high temperature applications in the steel plants, the boom is completely closed off to protect the parts
inside the boom i.e. hydraulic cylinders and hoses etc. against the radiation of heat and any falling objects.
At the front end the tools are attached by means of a large dimensioned solid tool axle and are actuated by a hydraulic
cylinder. The telescopic boom is guided by 20 eccentrically adjustable guide rollers hat are easily accessible from the
out side to assure a 100% concentrical rotation of boom i.e. during the drilling operation of converter tap holes.
The telescopic boom is fitted to the superstructure by means of a cradle support with the cradle that is actuated by
means of 2 hydraulic cylinders for the boom working angle.
The collapsible movement to extend the operating angle is actuated by means of 2 hydraulic cylinders.
The telescopic boom rotates 360° continuously within the cradle by means of a hydraulically driven planetary gear fitted
with a brake and a large dimensioned slew gear with external teeth.
with external teeth.
Telescopic stroke 3.200 mm
Boom rotation 360°, continuously
Boom rotation speed, at 90 l/min 11 min -1
Boom rotation torque 39 kNm
Tractive force (pull) of telescopic cylinder, rod area, at 250 bar operating pressure 148 kN
Compressive force (push) of telescopic cylinder, piston area, at 150 bar operating pressure 184 kN
Tractive force (pull) of tool cylinder, rod area, at 280 bar operating pressure 290 kN
Compressive force (push) of tool cylinder, piston area, at 280 bar operating pressure 430 kN
Total working angle 120°, +15° / -105°
Ripping force at tool point at 280 bar operating pressure max. 155 kN
Max. angular setting of the boom, raised 30° (1)
Max. angular setting of the boom, lowered 90° (1)
Reach from center of slewing gear up to tool point
of excavation tooth without boom extension
- retracted max. 7.800 mm (1)
- extended max. 11.000 mm (1)
Reaching height max. 8.600 mm (1)
Digging depth max. 6.000 mm (1)
Total weight (without tools) approx. 8.000 kg
Recommended weight of the carrier machine 20.000 – 22.000 kg
(1) dependent upon carrier machine
Due to technical development, modifications are reserved without notice!
Telescopic Boom TS32

Paint
Cradle / Telescopic boom Yellow, RAL 1007
Tools and attachments
Single ripper hook, double ripper hook, converter tap hole drill, porous plug pusher, ripper extensions, various sized
buckets, ripper bucket, boom extension, pneumatic hammer, hydraulic hammer, rotary drum cutter, mechanical quick
coupler, single point lifting hook as well as customer defined special tools.
Options
Working headlight, overload protection system, lifting cables, different boom operation angles
Technical Prerequisite of the hydraulic excavator for
TML–Telescopic rotary booms TS–Series
Telescopic cylinder, rod area (2) Pressure: 250 bar at 160 – 200 l/min
Telescopic cylinder, piston area (2) Pressure: 150 bar at 160 – 200 l/min
Tool cylinder, rod area (2) Pressure: 280 bar at 90 – 100 l/min
Tool cylinder, piston area (2)
Pressure: 280 bar at 90 – 100 l/min
Hydraulic motor (2) Pressure: 230 bar at 90 – 100 l/min
Brake release Pressure: 30 bar
Required pressure Pressure: 2 bar
Hoist cylinder, rod area with lock valve (2) Pressure: 230 – 320 bar at 160 – 200 l/min
Hoist cylinder, piston area (2) Pressure: 220 – 280 bar at 160 – 200 l/min
Tilt cylinder, rod area (2) Pressure: 160 – 320 bar at 160 – 200 l/min
Tilt cylinder, piston area with lock valve (2) Pressure: 220 – 280 bar at 160 – 200 l/min
ADDITIONAL FITTING::
Hydraulic hammer Pressure: approx. 140 bar at approx. 100 l/min
(2) All movements must be proportionally controlled!
The above mentioned pressures are dependent upon the carrier machine, the attachments and the extensions fitted,
therefore the values are only rough estimated values.
An exact scheme showing the completed machine.
Due to technical development, modifications are reserved without notice!
Telescopic Boom TS32

Reach with 1.000 mm extension
Due to technical development, modifications are reserved without notice!
Telescopic Boom TS32
Application example: TS32 on Liebherr R922