GLOBAL CAT 2017

HIGH TEMPERATURE
• TWO PART, HAND KNEADABLE,
PUTTY TYPE INDUSTRIAL STRENGTH
TITANIUM-REINFORCED EPOXY
IN STICK FORM WHICH IS USED
TO BOND AND REPAIR METALLIC
MATERIALS THAT WILL BE EXPOSED
TO HIGH TEMPERATURES.
• CONTRASTING BROWN AND WHITE
COLORED MATERIALS ARE MIXED
TOGETHER TO FORM A UNIFORM
GOLDEN BROWN TITANIUM COLOR
TO INDICATE THOROUGH MIXING.
• AFTER 8 HOURS, HIGH TEMPCAN
BE DRILLED, SANDED, THREADED, MACHINED OR
PAINTED AND IT IS RESISTANT TO WATER AND MOST
SOLVENTS.
• DOES NOT BOND TO POLYETHYLENE AND
POLYPROPYLENE AND IT IS NOT INTENDED FOR
STRUCTURAL APPLICATIONS.
LINE CODE PART NO. SIZE CASE PK
PTX 84333 2 OZ. CARDED 12
STEEL WELD
• TWO PART, HAND KNEADABLE, PUTTY
TYPE INDUSTRIAL STRENGTH, STEEL-
REINFORCED EPOXY IN STICK FORM,
WHICH IS USED TO BOND AND REPAIR
METALLIC MATERIALS THAT WILL BE
EXPOSED TO HIGH TEMPERATURES
UP TO 500° F.
• SETS IN 5 MINUTES AND CURES IN 1
HOUR TO A METALLIC STEEL GREY
COLOR.
• WHEN FULLY CURED IT CAN BE
DRILLED, TAPPED, MACHINED, LED,
AND PAINTED.
• NSF CERTIED SAFE FOR REPAIRS THAT COME IN
CONTACT WITH DRINKING WATER AND IS A NON-
RUSTING, NON-SHRINKING, NON-AMMABLE, MOISTURE
RESISTANT, AND NO VOC FORMULATION.
LINE CODE PART NO. SIZE CASE PK
PTX 84332 2 OZ. CARDED 12
BLACK PLASTIC WELDER
• A STRUCTURAL ADHESIVE DESIGNED
FOR GENERAL PURPOSE BONDING OF
A WIDE VARIETY OF MATERIALS.
• FORMS A TOUGH, DURABLE BOND
TO MOST PLASTICS, COMPOSITES,
CERAMICS, AND WOOD IN ANY
COMBINATION.
• FAST CURING PRODUCT WITH
GELLING OF MIXED ADHESIVE IN 5 – 6
MINUTES AND FIXTURING IN 9 – 10
MINUTES.
• NOTE: WILL NOT BOND
POLYETHYLENE AND POLYPROPYLENE
PLASTICS.
LINE CODE PART NO. SIZE CASE PK
PTX 84145 0.84 FL. OZ. SYRINGE 12
CHEMICALS 191
EPOXIES
PLASTIC BOND
• A TWO PART, HAND KNEADABLE,
PUTTY TYPE EPOXY IN STICK FORM
WHICH IS USED TO BOND AND REPAIR
MOST RIGID AND SEMI- FLEXIBLE
PLASTICS.
• RESISTANT TO WATER, CHEMICALS,
AND TEMPERATURES UP TO 300° F,
DRIES TO AN OFF-WHITE COLOR.
• SETS IN 25 MINUTES, AND CURES IN 3
HOURS.
• MADE WITH A NON-SHRINKING,
NON-AMMABLE, AND NO VOC
FORMULATION, CAN BE SAWED,
DRILLED, CARVED, SANDED AND PAINTED WHEN FULLY
CURED.
• NSF CERTIED SAFE FOR REPAIRS THAT COME IN
CONTACT WITH DRINKING WATER.
LINE CODE PART NO. SIZE CASE PK
PTX 84330 2 OZ. CARDED 12
COLD WELD BONDING COMPOUND
• A 15-MINUTE, TWO-PART
ADHESIVE AND FILLER SYSTEM
THAT ELIMINATES THE NEED FOR
WELDING OR BRAZING.
• IT REPAIRS, FILLS AND BONDS TO
IRON, STEEL, BRASS, BRONZE,
ALUMINUM AND COPPER.
• ONCE CURED, IT CAN BE
DRILLED, TAPPED, THREADED,
LED, SANDED AND PAINTED.
• RESISTS MOST AUTOMOTIVE,
SHOP AND CLEANING FLUIDS.
• WITHSTANDS TEMPERATURES TO
300°F INTERMITTENT.
• OVER 3,000 PSI SHEAR
STRENGTH ON STEEL.
LINE CODE PART NO. SIZE CASE PK
PTX 14600 2-1 OZ. TUBES, CARDED 12
5 MINUTES GAP FILLING EXPOXY
• VERSATILE, EASY-TO-USE, GENERAL
PURPOSE EPOXY ADHESIVE IS TWO-
PART ADHESIVE AND FILLER SYSTEM.
• SETS IN FIVE MINUTES, NO CLAMPING
NEEDED.
• CLEAR APPEARANCE.
• FILLS GAPS AND WILL NOT SHRINK.
• RESISTANT TO WATER AND SOLVENTS.
• TEMPERATURE RANGE -60°F TO
180°F (-51°C TO 82°C), PERMANENT
STRENGTH UP TO 3400 PSI.
• SELF-MIXING DUAL SYRINGE (84164)
BLENDS THE ADHESIVE AND FILLER AS IT DISPENSES,
ELIMINATING THE NEED FOR MANUAL MIXING.
LINE CODE PART NO. SIZE CASE PK
PTX 84101 0.84 FL. OZ. DUAL SYRINGE 12