GLOBAL CAT 2017

SPARK PLUGS
WIRE SETS
Identical OE End Caps
Designed to "click" into place for easy
installation and a secure fit. This allows
the installer to "feel and hear" that a solid
connection has been made, even when the
connection is in a difficult-to-see location.
HARD PARTS 317
1. Driving Circuit DENSO has developed a
small-size integrated driving circuit into the
top of the coil.
2. Superior Quality Components & Materials
to ensure optimal performance.
3. Tested & Inspected to ensure high quality.
4. Diagonal Windings to eliminate sectioned
bobbins, reducing size and weight.
Strong Connections
Through a patented process, the terminals are attached to provide an extremely
strong connection ensuring the cable and boot will not separate during removal and
installation.
CLICK HERE FOR DENSO
SPARK PLUGS
Pre-cut to Exact Lengths
Each wire in the set is pre-cut to exact length so the wire sets are ready to install right out of the box.
Spark Plugs:
1. OE parts, and Aftermarket
consolidated lines in
Platinum & Iridium TT
Lines.
2. denso is the patent holder
in Double Platinum, 360
Laser Weld, Iridium Tech,
SIPS & TT Lines
Ignition Wires:
1. 100% of the Wire/ Book Kits is
the identical grade supplied by
the original sypplier to the car
companies
2. Exact fit in every detail- all the
way down to the same color of the
original set
3. Spark plug connecter ends have
“posi-lock” connectors so you know
when contact with the plyug is made
You will feel it click in place.
All-Silicone Wires
The 7 and 8mm ignition wires are SAE J2031 Class E rated, the highest quality wire used in the industry. These wires can
withstand temperatures from -40° to 428° F and pass tests covering everything from electrical properties to shrinkage to chemical
resistance and accelerated life testing.
BENEFITS
Superior dielectric and thermal qualities
Factory-original fit, appearance, and
performance
World-class chemical and oil resistance
SAE WIRE CLASSIFICATION C D E
THREMAL OVERLOAD TEST TEMP. 155ºC / 311º F 180ºC / 356º F 220ºC / 428º F
LOW TEMPERATURE TEST -30ºC / -22º F -30ºC / -22º F -40ºC / -40º F
HIGH TEMPERATURE TEST TEMP. 120ºC / 248º F 155ºC / 311º F 180ºC / 356º F
LOW TEMP. RESISTIVITY TEST 20ºC / -4º F -20ºC / -4º F -30ºC / -22º F
1. High temperature "Class E" silicone jacket to withstand heat, cold, chemicals and moisture.
2. Reinforcing member for added strength and terminal retention.
3. Silicone insulation for superior dielectric and heat performance.
4. Conductive silicon layer for high temperature performance and EMI/
RFI noise suppression.
5. Fiberglass braid for maximum strength.
6. Carbon impregnated fiberglass core for superior support conductivity.
7. Core reinforced with KEVLAR®.
8. Layer impregnated with Ferrite.
9. Wire-wound layer to suppress EMI/RFI noise.