GLOBAL CAT 2017

84
AUTO BODY, PAINT & BODY SHOP
FLAP DISCS
Flap Disc, Blue Zirconia, 40 Grit Type 29, Depressed Center, 4-1/2"
with 7/8" Arbor ZA40, for right angle grinders. Cuts fast and outlast
sanding discs 10-to-1. Great flexibility. Ideal for rough or fine finishing.
Multiple layers of zirconia cloth flaps constantly exposing new extra
sharp grinding points. Laminated by state-of-the-art automated
equipment. Reinforced fiberglass
backing plate. Each disc balance tested
for vibration-free grinding/finishing.
• Wheel Size: 4-1/2"
• Arbor: 7/8"
• Grit: 40
• Spec: ZA40
• Max RPM: 13,500
• Tool Type: Right Angle Grinder
LINE CODE PART NO. DESCRIPTION
FOR 71985 4-1/2” X 7/8” ARBOR 3
Flap Disc, Blue Zirconia, 60 Grit Type 29, Depressed Center, 4-1/2"
with 7/8" Arbor ZA60, for right angle grinders. Cuts fast and outlast
sanding discs 10-to-1. Great flexibility. Ideal for rough or fine finishing.
Multiple layers of zirconia cloth flaps constantly exposing new extra
sharp grinding points. Laminated by
state-of-the-art automated equipment.
Reinforced fiberglass backing plate.
Each disc balance tested for vibrationfree
grinding/finishing.
• Wheel Size: 4-1/2"
• Arbor: 7/8"
• Grit: 60
• Spec: ZA60
• Max RPM: 13,500
• Tool Type: Right Angle Grinder
LINE CODE PART NO. DESCRIPTION
FOR 71986 4-1/2” X 7/8” ARBOR 6
Flap Disc, Blue Zirconia, 80 Grit Type 29, Depressed Center, 4-1/2"
with 7/8" Arbor ZA80, for right angle grinders. Cuts fast and outlast
sanding discs 10-to-1. Great flexibility. Ideal for rough or fine finishing.
Multiple layers of zirconia cloth flaps constantly exposing new extra
sharp grinding points. Laminated by
state-of-the-art automated equipment.
Reinforced fiberglass backing plate.
Each disc balance tested for vibrationfree
grinding/finishing.
• Wheel Size: 4-1/2"
• Arbor: 7/8"
• Grit: 80
• Spec: ZA80
• Max RPM: 13,500
• Tool Type: Right Angle Grinder
LINE CODE PART NO. DESCRIPTION
FOR 71987 4-1/2” X 7/8” ARBOR 8
BACKPLATE FOR TYPE 27 DEPRESSED CENTER
WHEEL MOUNTS
Backplate for Type 27 Depressed Center
Wheels Mounts 7" (177.8mm) and larger
Type 27 depressed center wheels,
without arbor, to 5/8"-11 angle grinder
shaft.
MANDREL SET FOR TYPE 1 CUT-OFF WHEELS
Mandrel Kit for Type 1 cut-off wheels, Includes both 1/4" (6.35mm)
and 3/8" (9.52mm) arbor holes. Included in Forney 71798, 5-Piece
3" (76.2mm) Cut-Off Wheel Kit
LINE CODE PART NO. DESCRIPTION
FOR 72386 MANDREL SET
COARSE WIRE WHEEL
• ARBOR HOLE: 3/8” (9.5mm)
LINE CODE PART NO. DESCRIPTION
PTR 14-321 2-1/2” WIRE WHEEL
CRIMP WIRE WHEEL
Stem mounted 1-1/2" 'coarse' wire wheel brush with 1/4" (6.35mm)
hex shank. Designed for easy access into narrow holes and confined
areas. Crimped style for light to medium duty applications. Removes
rust, scale and paint in hard to reach
areas. Use with any 1/4" (6.35mm)
diameter electric power drills or 01990
pneumatic (air) drill.
• Diameter: 1-1/2"
• Shank: 1/4"
• Hex Wire Size: .012" (.304mm)
• RPM: 6,000
LINE CODE PART NO. DESCRIPTION
FOR 72725 1” COARSE
Stem mounted 2" 'coarse' wire wheel brush with 1/4" (6.35mm) hex
shank. Designed for easy access into narrow holes and confined
areas. Crimped style for light to
medium duty applications. Removes
rust, scale and paint in hard to reach
areas. Use with any 1/4" (6.35mm)
diameter electric power drills or 01990
pneumatic (air) drill.
• Diameter: 2"
• Shank: 1/4"
• Hex Wire Size: .012" (.304mm)
• RPM: 6,000
LINE CODE PART NO. DESCRIPTION
FOR 72324 BACKPLATE
LINE CODE PART NO. DESCRIPTION
FOR 72727 2” COARSE WHEEL