ATEX compliant - SMC

56
Positioner type
000
100
Electro-Pneumatic Positioner
Series IP8000 (Lever type)
Series IP8100 (Rotary type)
IP8 000
Lever type
Rotary type
Pressure gauge (SUP, OUT1)
0
1
2
3
Not provided
0.2MPa (R1/8)
0.3MPa (R1/8)
1.0MPa (R1/8)
0 0 0
How to Order
Specifications
Item
X14
ATEX category 2
Type
Input current
Input resistance
Supply air pressure
Standard stroke
Sensitivity
Linearity
Hysteresis
Repeatability
Coefficient of temperature
Output flow rate
Air consumption
Ambient and using fluid
temperature
Explosion
protected
construction
Air connection port
Electrical wiring connection
Material
Weight
Classification of degree
of protection
Parameters
II 2G EEx ib IIC T5/T6
L
Accessories Note 1)
Without accesory
Nil
(standard)
With ø0.7 output restrictor
A
integrated pilot valve
With ø1.0 output restrictor
B
integrated pilot valve
C With fork lever type fitting MX
D With fork lever type fitting SX
With lever unit for a
E
35 to 100 mm stroke
With lever unit for a
F
50 to 140 mm stroke
G With compensation spring (A)
H With external scale plate
For more details, other specifications,
dimensions, see the specific catalogue.
Ambient temperature
With standard lever (10 to
85 mm stroke) for IP8000
Common to IP8000
and IP8100 small
capacity actuators
Only for IP8100
Only for IP8000
Note 1) If multiple accessories are required, they should be
indicated in alphabetical order.
Common to IP8000 and IP8100
Only for IP8100
IP8000 IP8100
Lever type lever feedback Rotary type cam feedback
Single action Double action Single action Double action
4 to 20mADC (standard) Note 1)
235±15Ω (4 to 20mADC)
0.14 to 0.7MPa
10 to 85mm (Deflection angle 10 to 30°) 60 to 100° Note 2)
Within 0.1%F.S. Within 0.5%F.S.
Within ±1%F.S. Within ±2%F.S.
Within 0.75%F.S. Within 1%F.S.
Within 0.5%F.S.
Within 0.1%F.S. / °C
80l/min (ANR) or more (SUP = 0.14MPa) Note 3)
Within 5l/min (ANR) or less (SUP = 0.14MPa)
Standard type: –20 to 80°C (T5) / –20 to 60°C (T6)
Low temperature type: –40 to 60°C (T6)
Intrinsic safety type of explosion protection
( 0344 ΙΙ 2G EEx ib ΙΙc T5/T6)
Approval no. KEMA 03 ATEX1119
1/4 NPT female screw
M20x1.5
Aluminum diecast body
Approx. 2.4kg
JISF8007, IP65 (conforms to IEC Pub.529)
Ui ≤28 V, li ≤125 mA, Pi ≤ 1.2W, Ci ≤ 0nF, Li ≤ 0mH
Note 1) 1/2 Split range is possible with the standard type (by adjusting the span).
Note 2) The stroke is adjustable in 0 to 60°C and 0 to 100°
Note 3) Standard air (JIS B0120): temp. 20°C, absolute press. 760mmHg, ratio humidity 65%.
Nil
L
Standar: –20 to 80°C
Low temperature: –40 to 60°C