CSG-Renewable_Topolog_RomaniaPDD_EN

www.csgstandard.com
www.zeroco2.cc
The 0.8 multiplier is necessary because the whole fuel consumption and thus part of its
carbon emissions is turned into the production of heat generated by power plants. The emission
associated with the production of this heat is 20%, according to the most recent data (from 2012).
The Romanian Energy Regulatory Authority (ANRE) does not report the fuel type and
quantity used by specific power plants, only the total energetic value of the different fuels used in
the whole electricity sector in a given year. Thus Equation 2 reduces to:
Where
Equation 3
FCE i : total energy value of “i” type of energy resource used in the national electricity generation
industry for the given year [TJ/y];
EGF i : electrical power fed into the grid by using “i” type fossil fuel for the given year [MWh/y].
Emission reductions
According to the CSG Standard’s “Solar, wind and hydro-power energy-based grid-attachable
electricity production methodology” version 2.1, the following formula shall be used to calculate
emission reductions thanks to the Project Activity:
Where:
ER: annual emission reductions; [tCO 2 e/y];
BE: baseline emissions [tCO 2 e/y];
ER = BE - PE
Equation 4
PE: GHG emissions from fossil fuel consumption [tCO 2 e/y].
2.6.2. Data and parameters that are available at the validation stage
Table 6. EGF i
Data / Parameter:
EGF i
Data unit:
MWh/y
Description:
Annual net energy delivered to the Romanian
Electricity Grid by using “i” type fossil fuel
Source of data used:
Romanian Energy Regulatory Authority (ANRE)
Value applied: Details in Annex 2
14