TECHNICAL OPERATIONS MEETING #04-10 24 May, 2004 Present ...

2.2.2 Machine Shop (D. Sabin)
No report is available at this time.
2.2.3 Engineering (R. Atapattu, I. Look)
No report is available at this time.
2.3 SOFTWARE GROUP (J. Thomas)
2.3.1 Mega Prime
� Training. (B. Mahoney, J. Thomas)
� Mega Prime first night of run set up documentation. (B. Mahoney, J. Thomas)
� Run support. (J. Thomas, B. Mahoney)
2.3.2 WIRCam
� Continued work on DetCom: raster configuration, shared memory configuration,
readout (GME), guide pixel capturing, mosaic manipulation. (B. Mahoney)
� Worked on alert notification system. (T. Vermeulen)
2.3.3 ESPaDOnS
2.3.4 TCS
2.3.5 NEO:
� Continued work on DetCom: raster configuration, shared memory configuration,
readout (GME), guide pixel capturing, mosaic manipulation. (B. Mahoney)
� Worked on alert notification system. (T. Vermeulen)
� Balance program mostly completed. Needs form for encoder limits due to the
unreliability of encoder positions, i.e., the encoder couplings becomes loose over
time. Hence max/min values tend to shift slightly. (R. Alles)
� Test of obslog mail archive html page generation and search engine on poonoo. (B.
Mahoney)
� Allen-Bradly plant control system:
� ABSS (Allen-Bradley Status Server) megaprime cooling configuration and readout.
(B. Mahoney)
� Fixed libabpcl5 where core dump generated if ethernet device disconnected. (B.
Mahoney)
� ABSS - built two outer loops to ensure abss runs continually even when inner loop
fails. (B. Mahoney)
� RPM page for ABSS MegaCam cooling monitoring. (B. Mahoney)
2.3.6 Database Administration:
� Training. (B. Mahoney, R. Savalle)