Water softeners catalogue
We are a wholesale supplier of products, solutions and services in water treatment. We provide only businesses companies such as distributors, retailers, manufacturers and assemblers. A catalog that includes products carefully selected from the most prestigious brands in the Water Treatment market, operative site, personalized services, logistics precise and efficient, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, are of Sinergroup Srl a reference for many companies of the sector.
We are a wholesale supplier of products, solutions and services in water treatment.
We provide only businesses companies such as distributors, retailers, manufacturers and assemblers.
A catalog that includes products carefully selected from the most prestigious brands in the Water Treatment market, operative site, personalized services, logistics precise and efficient, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, are of Sinergroup Srl a reference for many companies of the sector.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
One thermal probe is assembled on the cell in order to avoid any issue related to the temperature increase<br />
when the device is not producing chlorine. A perfect setting can only be done if the variable characteristics<br />
of the softener are taken into account (brine draw time, resin capacity, injector, etc). Use the following chart<br />
as a guideline to obtain the right set up. The chlorine production starts only when the conductivity on the<br />
probe reaches 18000 µS.<br />
Installation and maintenance:<br />
* Remove the cover of the Steril-Soft Pro box. Set the outlet current by using the AMPERE potentiometer,<br />
then use the TIME potentiometer to set the cycle time.<br />
* Close the cover and connect the electrode cell to the Steril-Soft Pro box and fit it in the brine line.<br />
* Fix the Steril-Soft Pro box to a wall or on a bracket, close to a 230V/50Hz electrical supply.<br />
* Connect the brine line to the inlet and outlet of the electrodes cell.<br />
* Link the power cord to the Steril-Soft Pro box and plug to the mains. Check that the electrical power is not<br />
controlled by a switch. The green L.E.D. indicates that the Steril-Soft Pro is on. The red L.E.D. indicates<br />
chlorine production and only comes on during the brine draw cycle.<br />
Set-up Instruction:<br />
* The adaptability of the Steril-Soft Pro for <strong>softeners</strong> up to 350 lt. of resin is obtained by setting in the TIME<br />
potentiometers inside the box.<br />
* The Ampere potentiometer (from 0.2A to 2.5A) regulates the amount of chlorine produced. The bigger the<br />
resin quantity is (similarly to the injector capacity), the more chlorine will have to be produced in order to<br />
ensure a sufficient chlorine concentration on the resin.<br />
* The Time potentiometer sets the chlorine production time from 2 to 20 minutes. When the device finishes<br />
the production it will remain switched off for 20 minutes before being ready for a new cycle.<br />
Code: 15000416<br />
STERIL-SOFT - components chlorine maker<br />
Automatic disinfection system for water softener from 0 to 90 lt. resin.<br />
Titanium electrode not included.<br />
Code: 15000417<br />
STERIL-SOFT - components titanium electrodes without cable<br />
for chlorine maker<br />
13 February 2018 36/72
Change language