Casting & Impressions

More documents

Recommendations

Info

Shake-N-Cast Impression Kit This kit features a self-contained, pre-measured water capsule and dental stone* cas ng material packaged in a single, heavy-duty plas c pouch. This incredibly simple-to-use kit eliminates all the mess and guess-work inherent with many other cas ng mediums. With Shake-N-Cast, the mixture is always the right consistency. The Shake-N-Cast kit contains 2 lbs. (32 oz.) of dental stone and 14 fluid oz. of liquefier, factorysealed in a tough plas c pouch. One kit is sufficient for cas ng a full -sized, adult shoe print. Simply apply pressure to break the water capsule, shake and knead the container for up to two minutes, cut off a corner of the pouch and pour it into the impression. When working in loose, dry soil or sand, we recommend preparing the impression with Dust and Dirt Hardener. SI-SNC42 Shake-N-Cast Impression Kit Net Wt. 42 oz. Master Shake-N-Cast Impression Kit This kit includes SIRCHIE®'s Shake-N-Cast dental stone* cas ng material in five (5) pre-measured pouches. Each individual SNC42 pouch contains the correct amount of cas ng material and water in a self-contained packet. One pouch will cast an adult size footprint up to 15" long. Merely press down on the pouch to break the water packet, shake for 30 seconds, knead the pouch for up to 1 1/2 minutes, and then pour into the impression. The kit contains 2 cans of our new Aerosol Dust and Dirt Hardener for preparing impressions in loose or sandy soil, as well as Silicone Release Agent to simplify cast removal and cleanup. Two cans of Snow Impression Wax are included for cas ng in ice or snow. The 2 cas ng frames are easily sized—one for footprints and one for re tracks. Features: • A complete impression cas ng kit • No more mess, no more measuring, no more mixing bowls, no more guess work • Simple to use • Superior results Contents: 5 - SNC42 Shake-N-Cast Impression Kits, Net Wt. 42 oz. 1 - FCF100 Adjustable Cas ng Frame, 7.25" x 12"-18" 1 - FCF200 Adjustable Cas ng Frame, 12" x 18"-24" 2 - 638CA Aerosol Dust & Dirt Hardener, 15 oz. 1 - SNC100CC Heavy-Duty, Molded Carrying Case, 17" x 13" x 7.375" 2 - SP1000 Aerosol Snow Impression Wax, 15 oz. 1 - SRA10 Aerosol Silicone Rubber Release Agent, 4.5 oz. 1 - KCP142 Melamine Spoon 1 - ESP30W Photo Scales, Set of 100 1 - 608E1 Evidence Tags with Ties, Set of 100 1 - Technical Instruc ons
MikroTrack The first reusable footwear and re track impression mould material. MikroTrack creates a perfect three dimensional impression with accurate recording of all relevant details in the evidence. The MikroTrack impression can be stored and will not dry. Once photographed, just mould it back together and it’s ready to use again. 1 Liter is sufficient for one foot CS-0162 3L plas c container SNOW PRINT POWDER Snow impressions at the crime scene normally contain more informa on that can be recovered through conven onal photography. The wet and transparent snow will absorb the light when taking a picture. The result will be an impression with insufficient contrast and without any valuable details. The SNOW PRINT POWDER can help you with these problems. The surface of the impression can easily be brushed with the powder using a so brush. The powder will change the surface of the impression, thereby allowing it to be photographed with much be er contrast, recovering valuable details. This technique works best on wet mel ng snow but also on cold frozen snow. CS-0081 Snow Print Powder, 250ml

Casting &amp; Impressions

Create successful ePaper yourself

Delete template?

Save as template?

Casting & Impressions