Creep-fatigue of High Temperature Materials for VHTR: Effect of ...

4. H. BREITLING, W. Dietz and H.J. Penkalla,
"Evaluation of Mechanical Properties of the Alloy
NiCr22Co12Mo (Alloy 617) for Heat Exchanging
Components of HTGRs," Proceedings of the
IWGGCR, High Temperature Metallic Materials for
Gas Cooled Reactors, Cracow, Poland (1988).
5. H.P. MEURER, G.K.H. Gnirss, W. Mergler, G. Raule,
H. Schuster and G. Ullrich, "Investigations on the
Fatigue Behavior of High-Temperature Alloys for
High-Temperature Gas-Cooled Reactor Components,"
Nuclear Technology, 66, 315 (1984)
6. M. SHINOHARA, N. Nojiri et al., “Long term hightemperature
operation in the HTTR, Outline and main
test results,” Proceedings of HTR 2010, Prague, Czech
Republic, Paper No. 167 (2010).
7. C. CABET and F. Rouillard “Corrosion of High
Temperature Metallic Materials in VHTR,” Journal of
Nuclear Materials, 392 (2), 235 (2009)
8. C. CABET, A. Terlain et al., "High temperature
corrosion of structural materials under gas-cooled
reactor helium," Materials and Corrosion, 57 (2), 147
(2006)
9. H. M. TAWANCY, “High-temperature oxidation
behavior of a wrought Ni-Cr-W-Mn-Si-La alloy,”
Oxid. Met., 45 (3/4), 323 (1996).
10. L.J. CARROLL, C.Cabet and R.N. Wright, “The role
of Environment on High Temperature Creep-Fatigue
Behavior of Alloy 617,” Proceedings of the ASME
2010 Pressure Vessel and Piping Division Conference,
Bellevue, WA, USA (2010).
11. L.J. CARROLL, C. Cabet, R.N. Wright and R.
Madland, “Creep and Environmental Effects on High
Temperature Creep-Fatigue Behavior of Alloy 617,”
Proceedings of the ASTM 2010 Conference, San
Antonio, TX, USA (2010).
12. ASTM E2714-09 “Standard Test Method for Creep-
Fatigue Testing,” ASTM International.
13. C. CABET and B. Duprey, "Long Term High-
Temperature Oxidation of Alloys for Intermediate Heat
Exchangers," Proceedings of ICAPP 2010, San Diego,
CA, USA, paper 10316 (2010).
322
Proceedings of ICAPP 2011
Nice, France, May 2-5, 2011
Paper 11284
14. K. NAGATO, T. Murakami, and T. Hashimoto, "High
Temperature Low-Cycle Fatigue Strength of Hastelloy-
XR," Proceedings of the IWGGCR, High Temperature
Metallic Materials for Gas Cooled Reactors, Cracow,
Poland (1988).
15. J.P. STRIZAK, C.R. Cbrinkman, and P.L. Rittenhouse,
"High Temperature Low-Cycle Fatigue and Tensile
Properties of Hastelloy X and Alloy 617 in Air and
HTGR-Helium," Proceedings of the Specialists'
Meeting on High Temperature Metallic Materials for
Application in Gas Cooled Reactors, T1-T15 (1981).
16. R. HALES, "A Quantitative Metallographic
Assessment of Structural Degradation of Type 316
Stainless Steel During Creep-Fatigue," Fatigue of
Engineering Materials and Structures, 3 (4), 339
(1980).
17. W.J. PLUMBRIDGE and E.G. Ellison, "Low-Cycle-
Fatigue Behaviour of Superalloy Blade Materials at
Elevated Temperature," Materials Science and
Technology, 3, 706 (1987).
18. P. RODRIGUEZ and K.B.S. Rao, "Nucleation and
Growth of Cracks and Cavities under Creep-Fatigue
Interaction," Progress in Materials Science, 37, 403
(1993).
19. A. NAGESHA, M. Valsan, K.B.S. Rao, and S.L.
Mannan, "Hold Time Effects on the Low Cycle
Fatigue Behaviour of a Nimonic PE-16 Superalloy,"
Trans. Indian Inst. Met., 53 (3), 283 (2000).
20. D.S. WOOD, J. Wynn, A.B. Baldwin, and P.
O'riordan, "Some Creep/Fatigue Properties of type 316
Steel at 625°C," Fatigue of Engineering Materials and
Structures, 3, 39 (1980).
21. T. LILLO, J. Cole, M. Frary, and S. Schlegel,
"Influence of Grain Boundary Character on Creep
Void Formation in Alloy 617," Metallurgical and
Materials Transactions A, 40A (12), 2803 (2009).