TFT-Display Datenblatt - Hy-Line

More documents

Recommendations

Info

4. Optical Specification Table 11. OPTICAL CHARACTERISTICS Ver. 1.0 Optical Stage(x,y) LCD Module Product Specification 50cm Pritchard 880 or equivalent FIG. 1 Optical Characteristic Measurement Equipment and Method LC370WXN Optical characteristics are determined after the unit has been ‘ON’ for 30min in a dark environment at 25± 2°C. The values specified are at an approximate distance 50cm from the LCD surface at a viewing angle of Φ and θ equal to 0 °. It is presented additional information concerning the measurement equipment and method in FIG. 1. Contrast Ratio CR DCR 800 - Ta= 25± 2°C, V LCD=12.0V, fV=60Hz, Dclk=72MHz, VBR_A =1.65V, VBR_B =3.3V, Except DCR Function 1100 - 1 Appendix 6 Response Time G to G - 5 10 ms 4 Color Coordinates [CIE1931] Gray Scale Parameter Surface Luminance, white Luminance Variation Viewing Angle (CR>10) RED GREEN BLUE WHITE x axis, right(φ=0°) x axis, left (φ=180°) y axis, up (φ=90°) y axis, down (φ=270°) Symbol L WH δ WHITE Rx Ry Gx Gy Bx By Wx Wy θr θl θu θd 5P Min 400 Typ -0.03 89 89 89 89 Value 500 0.636 0.335 0.284 0.610 0.144 0.063 0.279 0.292 - - - - Max 1.3 Typ +0.03 - - - - cd/m 2 degree HY-LINE Computer Components / www.hy-line.de/computer Typ Unit Note 2 3 5 6 15 / 34
Table 12. GRAY SCALE SPECIFICATION Ver. 1.0 Product Specification Notes 1. Contrast Ratio(CR) is defined mathematically as : CR (Contrast Ratio) = Maximum CRn (n=1, 2, 3, 4, 5) DCR (Dynamic CR) = Maximum CRn (n=1, 2, 3, 4, 5) Surface Luminance at position n with all white pixels CRn = Surface Luminance at position n with all black pixels n = the Position number(1, 2, 3, 4, 5), For more information, see FIG 2. LC370WXN 2. Surface luminance is luminance value at the center point across the LCD surface 50cm from the surface with all pixels displaying white. For more information, see FIG 2. 3. The variation in surface luminance , δ WHITE is defined as : δ WHITE(5P) = Maximum(L on1 ,L on2 , L on3 , ...... , L on5 ) / Minimum(L on1 ,L on2 , L on3 , ..... , L on5 ) Where L on1 to L on5 are the luminance with all pixels displaying white at 5 locations . For more information, see FIG 2. 4. Response time is the time required for the display to transition from G(N) to G(M) (Rise Time, Tr R ) and from G(M) to G(N) (Decay Time, Tr D ). For additional information see the FIG. 3. (N
Page 1 and 2: Kurzdaten TFT-Display Datenblatt Mo
Page 3 and 4: Number 1 2 3 4 5 6 7 8 9 3-1 3-2 3-
Page 5 and 6: 1. General Description Ver. 1.0 Pro
Page 7 and 8: 3. Electrical Specifications 3-1. E
Page 9 and 10: 3-2. Interface Connections Ver. 1.0
Page 11 and 12: 3-3. Signal Timing Specifications T
Page 13 and 14: 3-5. Color Data Reference Ver. 1.0
Page 15: 3-6-2. Sequence for Inverter Power
Page 19 and 20: Dimension of viewing angle range φ
Page 21 and 22: Ver. 1.0 Product Specification HY-L
Page 23 and 24: 6. Reliability Table 14. ENVIRONMEN
Page 25 and 26: 8. Packing 8-1. Designation of Lot
Page 27 and 28: Product Specification LC370WXN 9-3.
Page 29 and 30: Appendix 1-2. Host System 24 Bit Ve
Page 31 and 32: # APPENDIX 3 Appendix 2-2 Ver. 1.0
Page 33 and 34: # APPENDIX 2 Appendix 4 ■ LC370WX
Page 35: # APPENDIX 4 Appendix 6 Ver. 1.0 Pr

TFT-Display Datenblatt - Hy-Line

Create successful ePaper yourself

Delete template?

Save as template?