drip/low volume irrigation guide - Ewing Irrigation

DRIP IRRIGATION 1200 

DRIP/LOW VOLUME IRRIGATION GUIDE 

Drip Irrigation - also termed as micro, low-flow, 

low-volume or trickle irrigation - is the frequent, 

slow and even application of water, at low pressures, 

directly to the root zones of plants and trees. 

Used extensively in agriculture and commercial 

landscape for over fifteen years because of its 

many advantages over "high flow" irrigation 

systems, drip technology has grown extensively 

during the last decade, due to decreasing water 

supplies, with new products being developed 

every year. The concept of drip is simple, 

yet careful planning and attention to detail 

is required to design, install and maintain an 

efficient system. The major component parts 

include automatic/manual valves or garden 

valves, pressure regulators, filters, polyethylene 

tubing, fittings, and emitters. 

Controller: 

Although drip systems can be manually 

operated, for maximum efficiency an 

automatic controller can be connected 

to the system. It is necessary, however, 

to monitor the irrigation schedule and 

maintain the equipment. The selected 

controller should have capacity for more 

valves than are currently required by the 

system in case expansion is necessary. 

Pressure Regulators: 

Drip systems must operate at low 

pressures to ensure the proper 

functioning of emitters and to protect 

tubing and fittings from high pressures 

- recommended between 10 to 30 PSI. 

Both pre-set and adjustable regulators 

are designed to reduce incoming 

water pressure as well as regulate 

downstream pressure at a constant 

level. 

Filters: 

All drip systems require some type 

of filtration at the "head" in order 

to protect the emitter orifices from 

clogging. Various types of filters are 

available but screen filters with 150 

mesh screens are best suited. 

Call us at 800.343.9464 

VALVE BOX 

Tubing or PVC: 

Polyethylene tubing - a flexible 

plastic material - is most often used 

for drip systems because of its many 

advantages. Emitters are connected 

directly to the tubing. It is easily 

punched (for emitter installation), easy 

to repair, inexpensive and resistant to 

damage caused by UV rays so that it can 

be laid directly on the surface. 

Fittings: 

Compression-type or barbed fittings are 

used to connect polyethylene tubing. 

With a simple wrist action, tubing is 

"walked" into the fittings for a very tight 

fit. No tools, glue or clamps are required. 

Emitters: 

Although emitters vary in type and form, 

they all operate under reduced pressure 

to deliver water at a constant, even rate 

of flow - measured in gallons per hour. 

Emitters may differ in how they regulate 

water output - but they should deliver 

water at a predictable rate and resist 

clogging, or incorporate self-flushing 

features. Some emitters force water 

through labyrinth paths or turbulent 

a i q t 

spirals; others create a vortex effect and 

emit water from the low-pressure at the 

vortex center; and some use flexible 

diaphragms. 

Emitters are also categorized as 

"pressure compensating" and noncompensating". 

Compensating emitters 

- which usually include the diaphragm 

type - are designed to deliver the same 

amount of water over a fairly wide 

range of tubing line pressures, from 10 

- 40 PSI. Non-compensating emitters 

increase or decrease output as line 

pressure is increased or decreased. 

Retrofit Systems: 

For existing sprinkler irrigation systems, 

water-efficiency can be dramatically 

increased by replacing sprinkler heads 

with specially designed drip emitters, 

sprayers or foggers. 

Order on-line at www.ewing1.com 

IRRIGATION 

43

IRRIGATION 

44 

1200 DRIP IRRIGATION 

Batrow 

Controller Model Mini-I Series 

Primary Application 

Features: 

• 24 hour clock dial 

• 14 day calendar wheel 

• Cabinet 18 gauge steel, welded construction 

• Manual switch available for additional 

watering 

• Rain switch permits interruption of watering 

cycle during wet weather without disrupting 

normal cycle 

ITEM DESCRIPTION 

12000010 MINI I-24 BATROW 1 ST DRIP CTR 

12000011 BATROW CNTRL LONG HOUR PINS 

12000012 BATROW CNTRL SHORT DAY PINS 

Pressure Regulator 


Eliminate the need for a seperate low-flow 

regulator. 

• Reliable control regardless of fluctuation in 

upstream pressure or flow 

• 0.25 - 15gal @ 25psi 

• 3/4” NPT female inlet and male outlet thread 

• Max. recommended flow: 15GPM 


12000030 L/P 3/4 25PSI PRES REG .25-15G 

Drip Zone 


Features: 

• 3/4” Y-Filter Male threaded w/155 mesh screen 

• 25psi Presure Regulator .25-15Gal 

• 710 x 3/4” Male Adapter 

• 3/4” x 1" PVC Red Bushing TXT 


12000050 L/S PROD DRIP ZONE NO VALVE 

Pre-set Pressure Regulator 


Low-Flow Regulator 

• Preset operating pressure - 20 psi 

• Flow ranges from 1/10 to 8 gpm 

• Inlet size - 3/4" female (NPT) 

• Outlet size - 3/4" female (NPT) 

Medium-Flow Regulator 

• Preset operating pressures - 20, 30, 40 and 

50 psi 

• Flow ranges from 2 to 20 gpm 

PR-20: Inlet size/Outlet size 3/4" female NPT 

PR-30: Inlet size/Outlet size 3/4" female NPT 

Inlet size/Outlet size 1" female NPT 

PR-40: Inlet size/Outlet size 1" female NPT 


12000080 PR-10L 3/4 PRES REG .5-5 GPM 

12000090 PR-20L 3/4 PRES REG .1-8 GPM 

12000095 PR-20 3/4 PRES REG 2-20 GPM 

12000097 PR-30 3/4 PRES REG 2-20 GPM 

12000100 PR-30 1 IN PRES REG 2-20 GPM 

12000102 PR-40 1 IN PRES REG 2-20 GPM 

12000105 PR-50 3/4 PRES REG 2-20 GPM 

Fertilizer Injector 


Reduces the need for costly upstream regulation 

or flow control devices. Accurately control 

downstream system pressure on drip, tape and 

micro sprinkler systems. 


12000170 FERTILE EARTH 1 GAL FERT INJ 

Male/Female Adapters 

12000270 

12000280 


12000270 M-64-P 3/4 MHT X 1/2 SLIP ADPT 

12000276 M-66-P 3/4 MHT X 3/4 SLIP ADPT 

12000280 F-64-P 3/4 FHT X 1/2 SLIP ADPT 

12000286 F-66-P 3/4 FHT X 3/4 SLIP ADPT 

Transition Nipple 

3/4 Male Thread x 3/4 MHT 


12000290 N-1 3/4 MHT X MIPT TRANS NIP 

Irrigation Golf Industrial 3441 E. HARBOUR DRIVE • PHOENIX, AZ 85034


HF-80 Filter 


HF-80 Hose Filter Assembly 

• 3/4" filter with stainless steel 80 mesh steel 

screen. 

• 212 microns .0088 mesh opening. 

• 3/4" FHT outlet; 3/4" MHT inlet. 

HF-80-1 Stainless Steel Screen 

• 80 mesh stainless steel. 

• Rubber gasket. 


12000300 HF-80 SPEARS FILTER W/SCREEN 

3/4" Hose Thread Cap - 

with washer 


Use with Model CE 

Compression Fitting for 

manual drip line flushing; on 

4E-3/4" and 4E-1" filters for 

screen flushing. 

12000330 L/S PROD 3/4 HOSE CAP W/WASHER 

Female Hose Swivel - 

3/4" Spigot by 3/4" FHS 


Includes washer. PVC 

solvent welds into 

3/4" slip PVC fittings 

to make hose swivel 

configurations. 

12000350 3/4 FHS FEM HOSE SWVL W/WASHER 

Call us at 800.343.9464 

FC-710 1/2" Flow Control Valve 

a i q t 

A shut-off flow control valve 

used inline with drip tubing 

or 1/2" PVC pipe. 


•Fits .680" to .710" OD tubing 

12000354 FC-710 1/2 DRIP CC BALL VALVE 

Ball Valve - 

3/4" FH Swivel X 3/4" MHT 


• Control of individual drip line 

• Max. pressure 120 psi 

• Inlet and outlet "O" rings 

ensure watertight seal 

12000360 L/S PROD 3/4 HOSE BALL VALVE 

3/4" & 1" Y-Filter 


An all purpose filter - especially suitable for small 

emitter systems - designed so that the direction 

of flow is internal and along the longitudinal axis 

of the cylinder, causing minimal pressure loss. 

• Poly screen can be extracted for cleaning 

• Filter perforation - 155 mesh 

• Recommended maximum working pressure: 

120 psi 

• Recommended flow rate: 13 gpm / 3/4" 

18 gpm / 1" 


12000386 3/4 L/S PROD Y-FILTR MPT 155MSH 

12000387 1 L/S PROD Y-FILTER MPT 155 MSH 

Aquarius Brands 

Spin Clean Filters 


4-E "Spin Clean" filters force incoming water 

through a directional nozzle plate. This creates 

a high velocity, centrifugal action which forces 

debris to rotate down the stainless steel screen 

to the debris holding basin at the bottom of the 

filter where it may be easily flushed out via the 

valve provided. 

• Plastic body 

• MIPT inlet/outlet; Flushing outlet 3/4" MHT 

• Standard 150 mesh stainless steel screens 

for long life/durability 

• Two-piece threaded housing with O-ring 

seal; molded from high heat and chemical 

resistant ABS plastic; available with ball 

flush valve or unscrewing flush cap 

4E - 3/4" 

• Maximum Working Pressure: 80 psi 

• Maximum Flow: 11GPM 

• Maximum self-cleaning efficiency: 4 GPM 

and above 

4E - 1" 


• Maximum Flow: 28 GPM 


and above 

4E - 1-1/2" 




4E - 2" 





12000390 4E 3/4 AG PRODCTS Y-FLTR IPS 

12000392 4E-1 AG PRODCTS Y-FILTER 1IPS 

12000393 4E 1-1/2 AG PROD Y-FILTERS IPS 

12000394 4E 2P AG PRODUCT Y-FILTERS IPS 

12000396 3/4 4E REPLACEMENT SCREEN 150M 

12000398 1 4E REPLACEMENT SCREEN 150MSH 


45 

IRRIGATION

IRRIGATION 

46 


Amiad Plastic Filters 


All purpose filters 

with direct flow 

principle. Filtered 

particles collect 

at the end of the 

cylinder where 

they can be 

easily flushed 

out through the 

attached 3/4" flushing ball valve. Constructed 

of non-corrosive plastic that will stand up to 

"water hammer". Available with screen or disc 

element. Standard 155 mesh stainless steel 

screens for long life/durability. Recommended 

for sand and dirt particle filtration. The O-rings 

ensure perfect sealing . Filters can be easily 

dismantled by hand - no tools required. When 

algae is primary contaminant, disc element 

provides same excellent filtration as screens, 

but can go up to 3 times longer between 

cleaning. 

3/4" Y Filter - screen only 

• NP 3/4" male threads with flushing ball valve 

• Max. pressure: 150 psi 

• Flow rates: 13 gpm 

1" Y Filter - screen or disc 

• Inlet & outlet diameter 1" male with flushing 

ball valve 



1-1/2" Y Filter - screen or disc 

• Inlet & outlet diameter 1 1/2" male with 

flushing ball valve 



2" Y Filter - screen or disc 

• Inlet and outlet diameter 2" male (threaded) 

with flushing ball valve 




12000410 3/4 AMIAD DRIP FILTER 155MSH 

12000420 1 AMIAD DRIP FILTER 155MSH 

12000430 1-1/2 AMIAD DRIP FILTER 155MSH 

12000440 2 AMIAD DRIP T-FILTER 155MSH 

12000451 1 AMIAD IRRG FILTER 30MESH 

12000452 1-1/2 AMIAD IRRG FILTER 30MESH 

12000453 1-1/2 AMIAD SUPER FILTER 30MSH 

12000454 2 AMIAD T-FILTER 30MESH 

12000481 1 AMIAD DISC FILTER 60MESH 

12000482 1-1/2 AMIAD DISC FILTER 60MESH 

12000483 1-1/2 AMIAD SUPR DISC FLTR 60M 

12000484 2 AMIAD T-DISC FILTER 60MESH 

12000485 2 AMIAD T-SUPR DISC FILTER 60MSH 

12000486 3 AMIAD T-DISC FLTR 60MESH 

VU- FLOW Filters 

Features: 

• Easily installed on the discharge or suction 

side of pump. Uses centrifugal force to spin 

out sediment 

• Sediment collects on the outside of screen, 

making it easy to clean 

• Clear polycarbonate housing permits instant 

visual inspection 

• Includes purge valve for quick one step 

flushing of sediment 

• Filter body is molded PVC with slip fit ports 

(solvent weld to standard 1 1/2” rigid PVC 

pipe or fittings) 

• UV stabilized, weather resistant materials used 

for long service life 

• Filter cover only requires hand tightening - no 

tools needed 

Specifications: 

Flow rates from 10 -50 GPM 

• Maximum operating pressure 150 PSI at 73 

degrees F (23 degrees C) 

• Maximum water temperature 100 degrees F 

(38 degrees C) at 40 PSI 


12000590 1 NTSS-HPP 30M VU-FLOW FILTER 


12000595 1-1/2 NTSS-HPP 30M VU-FLOW FLT 

12000597 1-1/2 NTSS-HPP 100M VU-FLOW FLT 



12000603 1-1/2 NTSS 30M VU-FLOW FLT 



12000606 2 NTSS 30M VU-FLOW FILTER 

12000607 2 NTSS 60M VU-FLOW FILTER 

12000611 1-1/2 30M VU-FLOW SCREEN ONLY 



12000614 2 30M VU-FLOW SCREEN ONLY 

12000615 2 60M VU-FLOW SCREEN ONLY 

Poly Tubing 


12000700 TORO 1/2 BLUE STRIPE TBG 500FT 

12000720 TORO 3/4 BLUE STRIPE TBG 500FT 

Drip Tubing 

High quality, durable polyethylene and vinyl 

tubing for drip irrigation systems. 

Tubing Size I.D. O.D. Wall 

185 1/8" .125 .185 .030 

220 7/32" .160 .220 .030 

250 1/4" .170 .250 .040 

307 5/16" .250 .307 .028 

350 11/32" .250 .350 .050 

455 3/8" .375 .455 .040 

710 1/2" .620 .710 .050 

930 3/4" .830 .940 .055 

1200 1" 1.060 1.200 .070 


12000760 100 FT QUADRA-BUBBLER TUBING 

12000770 1000 FT QUADRA-BUBBLER TUBING 

12000890 LP220 100FT VINYL TUBING 

12000900 LP220 1000FT VINYL TUBING 

12000910 LP250 100FT VINYL 1/4 TUBING 


12000920 LP307 1000FT PE 5/16 TUBING 

12000940 LP350 500 FT PE11/32 TUBING 


12001000 LP185 100FT PE 1/8 TUBING 

12001004 LP220 1000FT PE TUBING 

12001005 LP185 1000FT PE 1/8 TUBING 

12001006 LP250 100FT PE 1/4 TUBING 

12001007 LP250 1000FT PE 1/4 TUBING 

12001008 LP710 100FT PE 1/2 TUBING 

12001010 LP710 500FT PE 1/2 TUBING 

12001020 LP940 500FT PE 3/4 TUBING 

12001030 LP1200 500FT PE 1IN TUBING 

NOTE: POLY TUBING IS PRICED PER 100 FEET. 



Insert Connectors 

1/8" & 1/4" 

Tee Connector 

1/4" Elbow 

Connectors 

1/8" & 1/4" 

Connectors 


12001495 L/P COUPLING FOR 1/8 TUBING 

12001496 L/P TEE FOR 1/8 TUBING 

12001497 L/P COUPLING FOR 1/4 TUBING 

12001498 L/P TEE FOR 1/4 TUBING 

12001499 L/P ELL FOR 1/4 TUBING 

12001500 COUPLING FOR 5/16-11/32 TBG 

REA-1 Riser Adapter 

Adapts to any 1/2" thread 

riser or nipple to accept 

barbed emitters or low 

gallonage sprays. 


12001502 REA-1 RISER EMIT ADPT 1/2 STFS 

Riser Adapter 

1/2" FPT X 1/2" MPT X 1/4" 

barb 


12001504 RISER ADAPTER 1/2IPS X 1/4BARB 


Dual Goof Plug 

1/8 X 1/4" 

Allows relocation of emitters 

• Two sizes on one plug 

• Strips of 10 

12001505 L/S PROD EMITTER PLUG 1/8X1/4 

Call us at 800.343.9464 

EH-12 Vibra Clean Emitter Head 

A "drip system in one head" - contains the filter, 

fertilizer applicator, 12 pressure compensators 

and twelve outlets. 

• Recommended Pressure Range: 5-60 PSI 

with approximately ± 10% of flow tolerance 

• Fits any 1/2" NPT male threaded riser 

• Use 0.125 ID X 0.187 OD distribution tubing 

• Filter size: 2 sq. in., 150 mesh 


12001508 EH-12 OLSON 1 GPH PC EMITTER 

12001509 EH-12 OLSON 2 GPH PC EMITTER 

Tri-Flow Spray Stake 

Has 3 flow rates and a 160° pattern. 

Insert the tubing over the node of 

your choice to select the optimum 

flow rate. Unit is pushed directly 

into the soil and the barbs will hold 

it securely in place. Accepts .125" 

I.D. tubing which is pushed over any 

of the 3 flow nodes. Can be used for 

container grown plants. 


12001510 L/S PRODUCTS TRI FLOW STAKE 

PC Emitters 


a i q t 

Turbulent flow, pressure 

compensating emitter with 

1/4" self piercing barb. 1/2", 

1 and 2 gpm. 

12001511 L/S PROD .5 GPH PC EMITTER RED 

12001512 L/S PROD 1 GPH PC EMITTER BLACK 

12001513 L/S PROD 2 GPH PC EMITTER GREEN 

Iso-Flow Emitters 

Pressure compensating from 

10 to 40 psi and enables the 

Iso-Flow to be used in hilly 

terrain. Can be used as an 

on-line emitter with or without 

distribution tubing. When used 

with feeder tubing it can be 

used as an off-line emitter. 1/4" Barb. 


12001520 L/S PROD .5 GPH ISOFLO EMIT RD 

12001521 L/S PROD 1 GPH ISOFLO EMIT BLK 

12001522 L/S PROD 2 GPH ISOFLO EMIT GRN 

Uni-Flow Emitters 

Pressure compensating 

from 10 to 40 psi. Screws 

directly onto a 1/2" MIPT 

adapter or nipple.Can 

be used with or without 

distribution tubing. 

1/4" barb. 


12001524 L/S PROD 1GPH UNI-FLOW PC EMIT 

12001525 L/S PROD 2GPH UNI-FLOW PC EMIT 

BOWSMITH 

NONSTOP EMITTERS 

The NonStop Emitter incorporates a series of 

flexible silicone orifices that create a turbulent 

flow condition which enables the emitter to 

maintain an accurate flow rate while sweeping 

suspended particles along the flow path. The 

emitter is in a continuous flushing mode so that 

even slime, algae and large particles can pass 

through without interruption in the flow rate - no 

need for a separate flushing cycle. 

Bowsmith - Single Emitters 

0.175 barb 

0.250 barb 


Single-outlet emitters feature 

two barb sizes to meet a 

variety of requirements as 

well as 3 standard flow 

ratings to match differing 

water application needs. 

Distribution tubing may be 

installed to provide water at 

points away from the emitter. 

12001528 SB-06 BSMITH EMITTER 1/2 GPH 

12001530 SB-10 BSMITH EMITTER 1 GPH 

12001532 SB-20 BSMITH EMITTER 2 GPH 


47 

IRRIGATION

IRRIGATION 

48 


Bowsmith - M210/220 Barbed 

Emitter 

Non-stop continuous 

flushing action which 

continuously flushes the 

emitter of slime and small 

particles while the emitter is 

in operation. 1/4" barb inlet. 


12001534 M210 BSMTH 1GPH BARB MULTI EMT 

12001535 M220 BSMTH 2GPH BARB MULTI EMT 

Bowsmith - L Series NonStop 

Emitter 

The L Series NonStop 

Emitter has a 1/2" femalethreaded 

base. It can 

be connected directly to 

underground PVC laterals 

with 1/2" threaded risers. 

.220 barb. 


12001539 SL206 BOWSMTH EMIT 1/2GPH 1/2IN 

12001540 SL210 BOWSMITH EMIT 1GPH 1/2IN 

12001542 SL220 BOWSMITH EMIT 2GPH 1/2IN 

Bowsmith - L Series Multiple 

Outlet NonStop Emitter 

The L Series Multiple-Outlet 

NonStop Emitter has a 1/2" 

female-threaded base. It 

can be connected directly 

to underground PVC 

laterals with 1/2" threaded 

risers. 

.220 barb. 


12001543 ML-206 BSMITH 1/2GPH MULTI EMT 

12001544 ML-210 BOWSMITH 1GPH MULTI EMT 

12001545 ML-220 BOWSMITH 2GPH MULTI EMT 

200 Series Accessory Pack 

Caps, elbows and bug plugs for Bowsmith 

emitters. 


12001550 200 SERIES ACCESSORY PACK 

Single Outlet 

Micro Flapper 

Single outlet fully 

compensating emitters. Drip 

output is not affected by 

reasonable pressure losses, 

elevation differences, or 

changes in source pressure. 

Pressure compensating 

emitters allow for smaller 

mains and submains and longer lateral lines, 

thus reducing overall system costs. 1/4" barb. 


12001564 MF-1 WADE MICRO FLAPPER 1 GPH 

12001566 MF-2 WADE MICRO FLAPPER 2 GPH 

Spot Systems Vortex Emitter 

A pressure compensating emitter without 

springs, diaphragms, moving parts, or flow 

passage constriction. Flow 

control (and pressure 

compensation) is accomplished 

by causing water to spin at 

high speed inside the emitter. 

Centrifugal force created by 

the spinning water results in a 

low pressure at the center of the vortex chamber 

where the emitter is located. 1/8" barb 


12001584 SPOT VORTEX 1 GPH EMITTER 

12001586 SPOT VORTEX 2 GPH EMITTER 

L/P S-6 Stake 

S-8 Stake 

• 8" wire stake 

Stakes 

S-1 Stake 

DTS30 

• Salco 7-1/2" PVC 

Coated 12 Gauge 

Tubing Stake 


12001591 1/4 TUBING SUPPORT CLAMP 

12001593 1/2 TUBING SUPPORT CLAMP 

12001594 S-1 STAKE FOR ET-700 TUBING 

12001595 L/S PROD S-6 STAKE FOR 185/250 

12001596 S-5 ELBOW STAKE 1/4 B X 10/32 

12001597 S-8 8 IN WIRE STAKE 

12001599 S-14 14IN WIRE STABILIZR STAKE 

12001600 L/P ELBOW STAKE W/BUG PLUG 

12001601 ASTA STAKE 12 INCH 

• Holds .680 to .710 OD 

tubing making it a firm 

base for micro sprayers 

• Length - 8" 

• Accepts .167 to .350 OD tubing 

• Length - 6" 

12005230 TS-025 1/4 DRIP TUBING STAKE 

12030560 DTS30-7 1/2 SALCO TUBING STAKE 

Irrigation Golf Industrial 3441 E. HARBOUR DRIVE • PHOENIX, AZ 85034 

S-14 

• 14" stake 

stabilizer for 

rigid riser jet 

assemblies 

Tubing Support Clamp 

S-5 Elbow Stake 

• 6" stake with 1/4" barbed 

side outlet and 10/32 NFT 

top outlet 

ASTA 12" 

Stake


Key Punch 


Punch 

Hardened steel tip cuts clean holes with shoulder 

to prevent cutting through the entire tube. 

Various grips prevent fatigue. 


Mini Bubbler 

This 10-32 threaded bubbler 

produces a gentle umbrella pattern for rapid 

watering near the root zone. Flow to individual 

plants can be adjusted or completely shut off. 

Stake with 1/4" barb. 


Tool that allows easy 

punch in tubing and 

has hole used removing 

caps. 

12001605 L/S PRODUCT KEY PUNCH 

12001610 RP-RED PUNCH .125 FOR ST&SPOT 

EZ-Squeeze Drip 

Punch 

• Use to puncture holes in 

drip tube 

• Punch pin can be replaced 

• Easy grip handle and constructed of durable 

plastic 


12001620 LP EZ-SQUEEZE DRIP PUNCH 

12001660 360 MINI BUBBLER 10/32 0-30GPH 

12001664 360 MINI BUBBLER W/STK 0-30GPH 

12001665 360 MINI BUBBLER 1/2FPT 0-30GPH 

Call us at 800.343.9464 

Spectrum 360 Jets 

a i q t 

Spectrum 360 jets are 

adjustable spray emitters 

with built-in vortex action. 

Suitable for a wide variety 

of landscape, nursery 

and garden watering 

applications. 10/32" THD. 



12001670 SPECTRUM 360 ADJUST JET THD 

12001674 SPECTRUM 360 ADJ JET W/STAKE 

Adjustable Shrubbler ® 


Emitter Access Box 


360º or 180º. Watering can 

be varied from a gentle 

stream pattern to a drip 

action or shut off. Simple 

finger-tip cap control for flow 

adjustment. 10/32" THD. 


12001676 360 ADJ BUBBLER W/ THD 0-10 GPH 

12001680 360 ADJ BUBBLER W/BARB 0-10 GPH 

12001682 180 ADJ BUBBLER W/BARB 0-10 GPH 

12001684 360 ADJ BUBBLR W/STAKE 0-10 GPH 

12001686 180 ADJ BUBBLR W/STAKE 0-10 GPH 

Emitter Access Box 

6" X 9" 


12001690 L/P EMITTER ACCESS BOX 6X9 

12001700 PEPCO EMITTER ACCESS BOX 

PMP-50 12" Micro Pop-up 

12" Pop Up Micro Spray. 

Includes 1/4" tubing inlet, 

12" pop up rigid riser and 

heavy duty spring. Popsup 

10". Recommended 

operating pressure 15 PSI. 

Accepts 10/32 threads. 


12001702 PMP-50 PEPCO 12IN MICRO POP UP 

Quadra Bubbler 

Works easily and with satisfying results on 

systems rated at 10-100 PSI. Can be installed 

above, at or below ground. 

• Fits into any 3/4" FIPT ell, 

tee or adapter 

• Flow rates from 1.2 to 25 

GPH, per outlet 

• Range of flow is divided 

into 4 color coded units: 

• Must use Quadra 

Bubbler tubing 

(12000760/12000770) 


BLUE = LOW FLOW 

BLACK = MEDIUM FLOW 

RED = HIGH FLOW 

GREEN = EXTRA HIGH FLOW 

12001710 1633 BLUE QUADRA-BUBBLR 1.7GPH 

12001720 5633 BLACK QUADR-BUBB 5.3 GPH 

12001730 9633 RED QUADRA-BUBBLER 10 GPH 

12001740 18633 GREEN QUADRA-BUBB 20 GPH 

Quadra Bubbler Accessories 

2131 - Clamp Plate 

• Clamps tube in place 

2132 - Bubbler Outlet Plug 

• Plugs unused ports 

2133 - Insect Plug 

• For P-QB tube 


12001770 2131 QUADRA-BUBB TUBING CLAMP 

12001775 2134 QB-2 TUBING CLAMP PLATE 

12001780 2132 QUADRA-BUBB OUTLET PLUG 

12001785 2135 OCTA BUBBLER OUTLET PLUG 

12001790 2133 QUADRA-BUBB INSECT PLUG 


49 

IRRIGATION

IRRIGATION 

50 


Quadra 

Bubbler Fittings 

Adapter 

• 3/4" FPT x 1/2" FPT 

Ell 

• 3/4" FPT X 1/2" FPT 

Tee 

• 3/4" X FPT X 3/4" FPT X 

1/2" FPT 


12001820 3/4 X 1/2 FPT PEPCO ADAPTER 

12001830 3/4 X 1/2 PEPCO 90 ELL TT 

12001850 3/4 X 3/4 X 1/2 PEPCO TEE TTT 

QB2 

A self cleaning, self-flushing four outlet flow 

control device which operates within a pressure 

range from 10-100 PSI; and requires no filtration 

when using city water. 

• Designed to easily replace 

existing spray heads - 

above, at, below ground 

• Delivers water at flow 

rates from 2 to 20 GPH 

per port 

• Easily fits on 1/2" risers 

• Must use Quadra 

Bubbler tubing 

(12000760/12000770) 

• Range of flow is divided 

into four color coded 

units: 


BLUE = LOW FLOW 

BLACK = MEDIUM FLOW 

RED = HIGH FLOW 

GREEN = EXTRA HIGH FLOW 

12001910 QB-2 1633 BLUE QUAD-BUB 1.7 GPH 

12001920 QB-2 5633 BLK QUAD-BUB 5.3 GPH 

12001930 QB-2 9633 RED QUAD-BUB 10 GPH 

12001940 QB-2 18633 GRN QUAD-BUB 20 GPH 

Octa Bubbler 

Self-regulated device - designed for use on the 

same station with other Quadra-Bubbler, QB2, 

Octa-Bubblers or spray heads - which operates 

within a pressure range of 10 - 100 PSI. 

• Back flow prevention device engineered for 

added protection 

• Eight individually flow controlled ports 

• ASTM 1/2" standard FPT inlet 

• 1/4" - 90° barbed swivel joints at connection 

point 

• Operates equally well above, at, or below 

the surface 

• Pepco standard color coding for ease of 

identification 


12001950 816 BLUE OCTA-BUBBLER 1.7 GPH 

12001960 856 BLACK OCTA-BUBBLER 5.3 GPH 

12001970 896 RED OCTA-BUBBLER 10 GPH 

12001980 8186 GREEN OCTA-BUBBLER 20 GPH 

Octa Bubbler Port 

Flow Control Devices 

• BLUE - LOW FLOW 

• BLACK - MEDIUM FLOW 

• RED - HIGH FLOW 

• GREEN - EXTRA HIGH 

FLOW 


12001792 BLUE OCTA-B FLOW CONTROL DEVIC 

12001794 BLACK OCTA-B FLOW CONTROL DEVI 

12001796 RED OCTA-B FLOW CONTROL DEVICE 

12001798 GREEN OCTA-B FLOW CONTROL DEVI 

Micro Sprinkler 

Fits any irrigation need, including "low flow" 

water applications and adapts to a wide variety 

of bases and fittings. 

Brown: .035 Nozzle 

9.4 GPH 

Radius: 9.5 ft. 

10/32" pipe thread base 


12002010 LP ROTOR SPRAY 9 GPH BRN 10/32 

Landscape Products 


Green: 20 psi 

.055 Nozzle 

23.5 GPH 

Diameter: 30 ft. 

Stream Height: 1.8 ft. 

Deflector Dia.: 9.2 

Yellow: 20 psi 

.08 Nozzle 

47.0 GPH 

Diameter: 34 ft. 

Stream Height: 2.5 ft. 

Deflector Dia.: 9.8 


12002030 LP MICRO SPKLR 1/2 21GPH GRN 

12002060 LP MICRO SPKLR 1/2 46GPH YEL 


Nozzle Adaptor 

Adaptor for 10/32" or 5/16" 

nozzles 


12002100 2010-01 L/P SHRUB ADPT 10/32 

12002105 2010-03 L/P SHRUB ADPT 5/16 



ROBERTS 

Spot Spitters 

Above ground spitters 

allow for individual watering 

of plants and improved 

water management. Spray 

patterns from 3' - 6'. Flow 

from 3.0 - 15.0 GPH at 20 

PSI. 1/8" tube connection. 


12002210 BROWN 90 SPOT-SPITTER LOW-FLOW 

12002220 GREY 90 SPOT- SPITTER MINI-FLO 

12002230 BLACK 160 SPOT-SPITTER HI-FLOW 

12002240 GREEN 160 SPOT-SPITTER MED-FLO 

12002250 AVOCADO 160 SPOT-SPIT LOW-FLOW 

12002260 TERRA COTTA 160 SPOT MINI-FLOW 

12002280 BLUE 360 SPOT-SPITTER MED-FLOW 

Green Winged Single-Piece Jet 

Winged for easy installation 

- no tools needed. Low flat 

angle spray to help prevent 

wind drift. 10/32" thread. 


12002361 GREEN SINGLE-PIECE FULL JET 

12002362 GREEN SINGLE-PIECE HALF JET 

12002363 GREEN SINGLE-PIECE QUARTER JET 

Green Top Hat Spray Jet 

One piece design featuring flat angle spray. Fits 

Rain Bird style pop-up adapters. Full, half and 

quarter spray pattern. 10/32" thread. 


12002601 GREEN TOP HAT FULL SPRAY JET 

12002602 GREEN TOP HAT HALF SPRAY JET 

12002603 GREEN TOP HAT QTR SPRAY JET 

Call us at 800.343.9464 

Spray Caps 


12002410 30 DEG MAXIJET SPRAY CAPS 






Bases 

Maxijet Rain Bird 


12002510 BLACK MAXIJET BASE 

12002520 BLUE MAXIJET BASE 

12002530 GREEN MAXIJET BASE 

12002540 RED MAXIJET BASE 

12002550 MAXIJET RAINBIRD SPRINKLER BASE 

a i q t 

Accessories 

• 8" and 12" extension tubing 

with adapter 

• 10/32" THD 


• Pro Punch Tool 

12002620 8 IN MAXIJET EXT W/ADAPTER 

12002630 12 IN MAXIJET EXT W/ADAPTER 

12002640 12IN RISER W/ 1/2 MIPT BASE 

12002650 MAXIJET STAKE ASSY W/24" TUBE 

12002680 MAXIJET PUNCH W/WRENCH 

MAXIJET NOZZLE CHART 

• 12" riser w/ 

1/2" MIPT 

• 10/32" THD 

• 12" Barb stake 

assembly with 24" 

tubing with 1/4" 

connector 

Cap Cap Deflector Deflector Deflector Deflector 

or Cap or Cap or Cap or Cap 

Press. Disch. 360° X 15 270° 180° 90° 40° 30° 

PSI GPH D.FT D.FT R.FT R.FT D.FT R.FT 

.03" Orifice 15.0 4.9 9.0 10.5 5.0 6.5 8.0 3.0 

Black Base 20.0 5.6 10.0 11.5 6.0 7.5 10.0 4.0 

25.0 6.3 11.0 13.5 7.0 8.0 11.0 6.0 

30.0 6.9 11.5 14.0 7.5 8.5 12.0 8.0 

.04" Orifice 15.0 8.9 14.0 13.0 6.0 7.0 13.0 5.5 

Blue Base 20.0 10.5 15.0 13.5 6.5 7.5 14.0 7.0 

25.0 11.8 16.0 15.5 7.5 8.0 17.0 8.0 

30.0 12.8 17.0 16.0 8.5 9.5 18.0 9.0 

.05" Orifice 15.0 14.0 16.0 14.5 7.0 8.0 16.0 8.0 

Green Base 20.0 16.0 16.5 16.0 7.5 8.5 18.0 9.0 

25.0 18.0 19.0 18.0 8.0 9.0 20.0 10.0 

30.0 19.9 20.0 18.5 9.0 10.0 22.0 11.0 

.06" Orifice 15.0 20.2 22.0 17.0 9.0 7.0 18.0 11.0 

Red Base 20.0 23.5 24.0 18.0 9.5 8.0 22.0 13.0 

25.0 26.5 25.0 19.0 10.5 9.0 24.0 14.0 

30.0 29.1 27.0 20.0 11.5 10.0 26.0 15.0 


51 

IRRIGATION

IRRIGATION 


52 

Vari-Flo Adjustable Bubbler 

0-20 gph, adjustable 

flow, 1/2" FIPT, 6 outlet, 

compensating bubbler. 

1/4" barbs. 


12002700 VARI-FLOW 6-OUTLT BUBB 1/2FPT 

Vari-Flow Valves 

A micro sized multi-purpose flow control valve. 

Choice of .06 Base X Thd or .25 Barb. Flow is 

balanced or shut off by rotating the knob. 


12002710 VARI-FLOW VALVE .06 BASE X THD 

12002730 VARI-FLOW VALVE 1/4 BARB 

Vari-Rotor Spray 

• Adjustable to reduce 

volume and radius of 

flow. 

• 13/32" THD 


12002750 VARI-ROTOR SPRAY 10/32 THD 

Vari-Jet 

• Valve adjusts radius of 

throw and reduces flow 

• 10/32" THD 


12002760 VARI-JET 180 BLACK 10/32 THD 

12002765 VARI-JET 90 BLACK 10/32 THD 

Compression Adapters 

12002800 

12002810 


Socket Adapter 

1/2" C x 3/4" S 


CA250 - Orange 

.250 comp. X 1/2" PVC soc. 

CA307 - Gray 


CA350 - Black 


CA455 - Red 


CA710 - Blue 


CA930 - Black 


CA1200 - Black 

1.200 comp. X 1" PVC soc. 

12002800 1/2 MIPT X 350 COMP ADAPTER 

12002802 1/2 MT X .250 BARB SLEEVE 2088 

12002810 250CA ORANGE COMPRESSION ADPT 

12002840 307CA GREY COMPRESSION ADAPTER 

12002880 350CA BLACK COMPRESSION ADAPT 

12002910 455CA RED COMPRESSION ADAPTER 

12003010 710CA COMPRESSION ADAPTER 

12003012 710CMA 710 X 3/4 SOCKET ADAPTER 



12003015 710SA 1/2" X 3/4" SOCKET ADAPTER 

Compression Swivel Tee 

3/4" Female Hose 

Swivel X Compression X 

Compression Tee 


12003020 710CST COMPRESS SWIVEL TEE 


Compression x 

Compression x 



12003060 710C3T 3 WAY COMPRESSN TEE 

12003220 930C3T 3 WAY COMPRESSN TEE 

Compression-Ell 


Compression x Compression 

12003070 710C-ELL CXC COMP 90 ELL 

12003230 930C-ELL CXC COMP 90 ELL 

Compression-FPT-Ell 

1/2" Female Pipe Thread x 

Compression Ell 


12003080 710CELLF FPTXC COMPXFPT 90 

Compression Coupling 


12003100 710CC COMPRESSION COUPLI 

12003240 930CC COMPRESSION COUPLI 

12003290 700X930RCC COMP RED COU 

Compression End Cap 

Compression End Plug w/ 

Unscrewing Cap 


12003140 710CETC THREAD END COMP 

12003250 930CETC THREAD END COMP 

Compression End Valve 

End Tube - Flush Valve X 

Compression 


12003150 710CEFCH COMP END FLUSH C 

Compression Hose Swivel 

3/4" Female Hose Swivel X 

Compression 


12003180 710CHS COMP HOSE SWIVEL 

12003260 930CHS COMP HOSE SWIVEL 

VBK-1 Air/Vac Relief Valve 

1" Air/Vacuum Relief Valve with 

removable test point 


12003305 VBK-1 PVC AIR/VAC RELIEF V 

Figure Eight End Closure 

For nominal 710 OD drip 

tubing 


12007210 L/S PROD FIG 8 HOSE END CLAMP 



DBK - E2 Emitter 

A basic non-compensating, 

"all around" emitter featuring 

laminar (spiral) flow path 

design, simple "pull apart" 

disassembly for easy 

cleaning, and a barbed base 

connection. 

Connects to end of 1/4" micro-tubing or 

directly into distribution and supply hose. 

Recommended operating range 12-20 PSI. 


12003810 DBK-04 1GPH E-2 TORO EMITTER 



Turbo-SC-Emitter 

With its pressure 

compensating design will 

remain consistent in the 

discharge rate whatever the 

pressures (10 to 50 psi). 

Features easy serviceability with screw-apart 

cleaning; barbed connection for use with 1/4" 

micro-tubing and hose; stabilizing tabs at the 

base for stability. 


12003900 DPJ-02 1/2GPH TORO PRES COMP 

12003910 DPJ-04 1GPH TORO PRES COMP 

12003920 DPJ-08 2GPH TORO PRES COMP 

Fogger 

Distributes a fine mist or 

spray. Foggers operate on 

extremely low flow rates as 

compared to emitters. 

The SFJ412 features a barbed connection which 

can attach directly to 1/4" micro tubing or 1/2" 

distribution tubing. Disassembles easily for ease 

of servicing. 

• Discharge at 20 psi = 3.0 GPH 

• Diameter of throw: 2-5 ft 


12004020 SFJ-412 3 GPH TORO FOGGER 

Call us at 800.343.9464 

Xerigation 

Control ZoneXCZ-075 3/4" 

Features: 

• Prepackaged kit includes: Low Flow Valve, 

RBY Filter and 30 psi pressure regulator. 

Simple, 3-component kit is easily installed and 

maintained. 


12004510 XCZLF-075 XERIGTN CONTROL ZONE 

Xerigation Control Zone XCZ-100 1" 

Features: 

• Prepackaged kit includes: 1” Low Flow Valve, 

3/4” RBY Filter and 30 psi Pressure Regulator. 


12004530 XCZLF-100 XERIGATN CONTRL ZONE 

12004620 XCZ-NOVALVE XERIGATN CTRL ZONE 

Xerigation Retrofit Kit 

Permits convenient conversion to drip 

tubing when used with compression 

adapter. Provides 30 psi pressure 

regulation and 200-mesh screen that is 

easily accessible. 


12004120 1800 XERIGATION RETROFIT KIT 

Xerigation PRS Riser 

Provides convenient 30 psi pressure 

regulation at the riser for any 1/2" FPT 

emission device or compression adapter. 

Installed above or below grade. 


12004190 PRS050 1/2 RETROFIT PRS RISER 

a i q t 

Xeri Tools 


Use Rain Bird’s Xeriman 

Tool or the multifunctional 

Bug Gun for 

fast, easy and one-step 

installation of Xeri-Bug 

emitters. 

12001578 XERIMAN RAINBIRD TOOL 

12001580 EMA-BGX RB BUG GUN EMITTER 

Xeri-Bug Emitters 

Pressure compensating diaphragm delivers 

uniform flow to 1/4" tubing at varying pressures 

caused by rolling terrain. 

XBT 

Xeri-Bug Multi-outlet Emitter 

XB XBT 

Pressure compensating emitters with six 1 GPH 

outlets that provide irrigation for larger trees or 

up to six plants per emitter. Available with barb 

or threaded inlet. 

• 150 mesh filtration required 

• Pressure: 15-50 PSI 

• Self piercing barb on XB 

Series 

• 1/2" FPT inlet XBT 

Series 

• Flow range .35 - 1.9 GPH 



12005080 XB-10-6 R/B MULT EMT BARB 1 GPH 

12005082 XB-20-6 R/B MULT EMT BARB 2 GPH 

12005090 XBT-10-6 R/B MULT EMT THD 1 GPH 

12005092 XBT-20-6 R/B MULT EMT THD 2 GPH 


XB 

12005000 XB-05 1/2 GPH XERI-BUG EMITTER 

12005010 XB-10 1 GPH XERI-BUG EMITTER 

12005020 XB-20 2 GPH XERI-BUG EMITTER 

12005024 XB-10 MEGA 1 GPH BULK EMITTER 

12005028 XB-20 MEGA 2 GPH BULK EMITTER 

12005038 XB-10PC-10/32 1GPH XB THD EMIT 

12005040 XB-20PC-10/32 2GPH XB THD EMIT 

12005060 XBT-10 1 GPH SHRUB XERI-BUG 

12005070 XBT-20 2 GPH SHRUB XERI-BUG 

6 Outlet Manifold 

Enables user to vary outlet 

flow by placing a Xeri- 

Bug , Xeri-Bubbler , and/ 

or Xeri-Spray emission 

device at the end of 1/4" 

vinyl distribution tubing, 

which is connected to a 

"Sure-Grip" barb. 

• 1/2" female NPT inlet 

• Pressure: 15-50 PSI 

• Unrestricted flow through barbed outlets 

indicated by gray color 


12005099 EMT-6X 6-OUTLET DIST MANIFOLD 

IRRIGATION 

53

IRRIGATION 

54 


Xeri-Bird 8 Outlet Emitter 

Delivers water from a single 

1/2" threaded riser to 

multiple locations. 

• Flow 0.35 - 24 GPH per 

outlet, 1/4" tubing 

• Use Xeri-Bug outlet 

emitters 


12005108 XBD-80 XERI-BIRD PLUGGED 

12005110 XBD-81 XERI-BIRD 8 OUTLET 1GPH 

Pressure Compensating 

High Flow Emitters 

Ideal for large shrubs and trees. Color coded 

barb for visual identification. Flow range: 5 to 

24 GPH. Pressure: 10-50 PSI. Use with 1/4" 

tubing. 


12005120 PC-05 5 GPH XB EMISSION DEVICE 

12005122 PC-07 7 GPH XB EMISSION DEVICE 

12005124 PC-10 10GPH XB EMISSION DEVICE 




TEE 

Irrigation Accessories 

ELBOW 

Compatible with any manufacturer’s 1/2” tubing 

with outside diameter (O.D.) ranges from .630” 

to .710”(16 mm to 18 mm). Nobody else in the 

industry offers a faster, more convenient way to 

make more drip connections in a lot less time. 


COUPLER 

12005410 MCDFTEE MULTI DIAM COMP TEE 

12005420 MCDFEL MULTI COMP ELBOW 

12005430 MCDFCOUP MULTI DIAM COMP COUP 

Algae Resistant PVC Flex Hose 

PCC/PCR Single Outlet Emitter 

PCR 


Salco's A/R PVC flex hose contains a special 

chemical that inhibits the growth of algae within 

the hose. It is compatible with off-the-shelf 

fittings, adaptors, adhesives, most emitters as 

well as chemicals and fertilizers normally used in 

irrigation systems. (AR-050 uses 3/8" PVC fittings) 

Size O.D. Wall 

1/2" 0.68 0.090 

3/4" 1.05 0.150 


12030110 1/2PVC HOSE SALCO AR-050 500FT 

12030120 3/4 PVC HOSE SALCO AR-075 250FT 

PCC 

Pressure compensating, flow 

regulating and self-flushing. 

Regulating feature permits longer 

hose runs and more emitters with 

uniform drip rates over a wide range 

of pressures above, on or below 

ground. 1/8" barbed connection. 

Various flow rates are available - 

color coded for easy identification. 

Self-cleaning feature flushes clean 

every time the water is turned on 

or off. Fits most types and sizes 

of hose. Emitters can be added 

without changing flow rate. 


12030200 PCC5 SALCO OUTLET EMIT 1/2GPH 

12030210 PCC1 SALCO OUTLET EMITTER 1GPH 

12030220 PCC2 SALCO OUTLET EMITTER 2GPH 

12030250 PCR-1 SALCO BARBED EMIT 1 GPH 

12030260 PCR-2 SALCO BARBED EMIT 2 GPH 

Emitter Access Sleeve 


Protects emitters from 

damage. Facilitates 

relocation of underground 

feeders. Accepts 3/4" IPS 

and 1/2" hose size which are 

held firmly in place by lid. 

12030520 DAS8 SALCO EMIT ACCESS SLEEVE 

12030560 DTS30-7 1/2 SALCO TUBING STAKE 

PC6-Six Outlet 

Pressure compensating, 

flow regulating and 

self-flushing. Ideal for 

orchards or areas where 

multiple emitters will be 

required. Can be used 

on hills and slopes. 

Each of the six outlets 

are barbed for securing 

distribution hose with a nominal inside diameter 

of 1/8". 

Each outlet has a separate silicone elastomer 

control element which provides individual 

pressure compensation and automatic flushing; 

and a drip rate within 15% of its rated flow over 

a pressure range of 8 to 45 psi. Outlets may be 

individually closed and reopened for future use. 


12030310 PC61 SALCO 6 OTLET EMIT 1 GPH 

12030320 PC62 SALCO 6 OTLET EMIT 2 GPH 

PC6T 6 Outlet Emitter w/base 


Six outlet emitter 

with 1/2" FPT base; 

1/8" tubing 

12030340 PC6T-1 SALCO 6 OUTLET THD EMIT 

12030350 PC6T-2 SALCO 6 OUTLET THD EMIT 

Emitter Outlet Cap PC6C 

• For temporary or 

permanent closure of 

unused outlets 

• Fits PC6 and PCR 

emitters; or 1/8" barb 


12030410 PC6C SALCO EMITTER OUTLET CAP 

Emitter Outlet Check Valve 

• EOCV-125 for use with 

1/8" distribution tubing 

• EOCV-220 for use with 

1/4" distribution tubing 


12030430 EOCV-125 SALCO EMITTER OUTLET 

12030440 EOCV-220 SALCO EMITTER OUTLET 



The Techline 

pressure 

compensating drip 

tubing features: 

Universal Hose Punch 

Handles 

all hose sizes from 

3/8" to 1" of any wall 

thickness. Self stripping 

punch point - spring return. 

For emitters with 1/8 shank. 


12030480 HP125 SALCO HOSE PUNCH-PLIER 

Techline Tubing 

• 12", 18" or 24" spacing with .6 or .9 GPH 

discharge 

• Pressure compensating emitters with a range 

of 7 to 70 PSI 

• Self flushing/cleaning, elastomer diaphragm 

• UV resistant 


12050005 18 IN TECHLINE 0.4 GPH 100 FT 





















12050910 BLANK TECHLINE TUBING 100 FT 

Call us at 800.343.9464 

Insert Coupling 

12051010 

Insert Elbow 

12051020 

Insert Tee 

12051030 

Male Adapter 

12051035 

Dripline Insert Fittings 

Combination Tee 

12051060 

Insert Cross 

12051070 

Flush Valve 

12051210 

Air Relief Mpt 

12051240 

Pressure Indicator Stake 

12051250 

a i q t 

Dripper Plug Ring 

12051260 

Shut Off Valve 

12051270 

Dripline Insert Fittings 


12051010 DRIPLINE BARBED INSERT COUP 

12051020 DRIPLINE BARBED INSERT ELL 

12051030 DRIPLINE BARBED INSERT TEE 

12051035 DRIPLINE MALE ADPT 1/2 MT X INS 

12051040 DRIPLINE MALE ADPT 3/4 MT X INS 

12051050 DRIPLINE ADPT TEE 3/4 FT X INS 

12051060 DRIPLINE V 2-WAY INSERT X 3/4 M 

12051070 DRIPLINE BARBED INSERT CROSS 

12051210 DRIPLINE FLUSH VALVE 1/2 MIPT 

12051220 DRIPLINE FLUSH VALVE INSERT 

12051240 AIR/VAC RELIEF VALVE 1/2 MPT 

12051250 NETAFIM PRES. INDICATOR STAKE 

12051260 DRIPLINE DRIPPER PLUG 

12051270 DRIPLINE SHUT-OFF VALVE 

Filters 

• Residential and commercial applications 

• Highly effective multiple disc filter design 

• Simple, easy and throrough filter cleaning 

• Low friction loss 


12051320 DF075-140 3/4 NETAFIM 140 MESH 

12051350 DF100-140 1 NETAFIM 140 MESH 

12051410 DF150S-140 1 1/2 NTFM SUPR 140 

12051440 DF-200 2 NETAFIM 140 MESH 


IRRIGATION 

55

IRRIGATION 

56 


Regulators 

• Provides constant outlet pressure 

• 15-50 PSI range 


12051620 PRV075LF20 3/4-LF NTFM 20 PSI 

12051640 PRV075LF35 3/4-HF NTFM 35 PSI 

12051650 PRV075HF45 3/4-HF NTFM 45 PSI 

12051690 PRV15045 1-1/2 NETAFIM 45 PSI 

DL2000 

Flexible dripline system, ideal for odd-shaped 

designs, median strips, public recreation areas 

and residential property. 

• Self-cleaning emitters 

• ROOTGUARD ® protection 

• Can be installed at grade or buried 4-8" 

• 7 year warranty on DL2000 tubing and 

ROOTGUARD ® protection 


12061050 12IN PC DL2000 0.5 GPH 500 FT 

12061080 12IN PC DL2000 0.5GPH 1000 FT 

12061150 18IN PC DL2000 0.5 GPH 500 FT 

12061180 18IN PC DL2000 0.5GPH 1000 FT 

12061550 12IN PC DL2000 1.0GPH 500 FT 

12061580 12IN PC DL2000 1.0GPH 1000FT 

12061650 18IN PC DL2000 1.0 GPH 500FT 

12061680 18IN PC DL2000 1.0GPH 1000 FT 

Drip-In 1/4" 

Soaker Dripline 

For shrubs, trees and ground covers, planters, 

parkways, median strips, above-ground or under 

mulch. 

• Reliable, extremely clog resistant; self 

cleaning emitters with built-in strainers 

• Precise flow uniformity; turbulent flow 

controlled outlets 

• Pre-inserted emitters that are inseparably 

welded to the inside wall of the tubing 

• Emitters spaced 6" or 12" on center 

• Flow: 1 GPH 


Another Ewing Advantage 

12070110 100FT LP 1/4 6IN EMITTER LINE 

12070210 100FT LP 1/4 12IN EMITTER LINE 

ACCOUNT MANAGEMENT 

We make it easy to manage your 

business online! Pay your bills by credit 

card or check. Track your spending on a 

particular job. Pull and print old invoices. 

It's just another Ewing Advantage! 

Irrigation Golf Industrial 3441 E. HARBOUR HARBOUR HARBOUR DRIVE • PHOENIX, AZ 85034

drip/low volume irrigation guide - Ewing Irrigation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?