Accessory Catalogue 2019/2020

WARD EQUIPMENT | OXYGEN THERAPY | PRESSURE REDUCER | 245
PRESSURE REDUCER
1.3 PRESSURE REDUCER
A Pressure reducer OxyLine,
customized configuration
of pressure reducers
OxyLine’s modular design means you can accurately
choose the pressure reducer you need from the
following components:
– O 2 or AIR pressure reducer with 200 or 300 bar
– Manometer, vertical or horizontal
– Flow regulator settings
(1, 2, 3, 4, 6, 8, 12 and 15 L/min)
and 9/16" sterile water connector
– Flowmeter for up to 16 L/min with
connector for Dräger reusable humidifier,
sterile water connector and 6 mm (0.2 in) nozzle
for an oxygen mask
– Self-closing NIST connector
– Centralized gas supply coupling, e.g. to connect
up a mains-operated ventilation device
– Ejector for short-time suction of eg. secret
Type:
Single-stage pre-set
pressure reducer
Permissible inlet
pressure range: 11 to 300 kPa × 100
Nominal outlet
pressure (p2):
Weight:
Material:
non-adjustable,
output pressure as per
rating plate
1.2 kg to 2 kg (depending
on connector type)
Brass with
chemical nickel surface
MP00100
A
INDEX ORDER NO.
NEONATAL CARE
MT-1358-2003
RAIL ACCESSORIES WARD EQUIPMENT MONITORING
SENSORS
SODA LIME
VENTILATION OVERVIEW
Not all articles are available worldwide.
INDEX PRODUCT