Accessory Catalogue 2019/2020

WARD EQUIPMENT
VarioAir® ejector for rail.
The gas supply is ensured by AIR connection hose.
This rail version can be connected to all standard
wall rails (10 mm width and 25 mm height).
You can use the VarioSafe® disposable filter system to
reliably protect the VarioAir® series and the central
vacuum system against contamination.
Technical data:
VarioAir P (MP00545, MP03221)
Maximum vacuum:
-48 to 0 kPa (-480 to 0 mbar)
Maximum suction flow: 20 L/min
Maximum gas consumption: 40 L/min
Maximum sound level: 47 dB(A)
Inlet pressure range:
4 to 5.5 bar
Weight:
800 g
Dimensions (W/H/D) in mm: 80 × 200 × 160 (without VarioSafe)
80 × 330 × 160 (with VarioSafe)
Hose nozzle:
Ø 6 mm
Pressure relief valve:
from 0.1 kPa on (1 mbar)
Bacterial retention:
99.99998% (with VarioSafe)*
Viral retention:
99.9998% (with VarioSafe)*
*Test has been performed by Nelson Lab, USA, before 2010
NEONATAL CARE AND THERMOREGULATION | WARD EQUIPMENT | 419
A
D-28521-2009
MONITORING
SENSORS
SODA LIME
VENTILATION OVERVIEW
A Ejector VarioAir® P Rail,
for bronchial suction, gas connection AIR,
for connection to all standard wall rails
The bronchial aspirator can be used in magnets with static
magnetic fields of 1.5 tesla and 3 tesla.
Minimum distance from the center of the magnetic field:
Magnetic flux density of 40 millitesla (400 gauss).
A Ejector VarioAir® MRI P Rail,
for bronchial suction, gas connection AIR,
for connection to all standard wall rails
For CS hoses please refer to chapter "Accessory for gas supply".
MP00545
MP03221
INDEX ORDER NO.
NEONATAL CARE
WARD EQUIPMENT
RAIL ACCESSORIES
Not all articles are available worldwide.
INDEX PRODUCT