ssur Prosthetic Catalogue 2019

RELAX TRANSFEMORAL
ÖSSUR LINERS
AND SOCKETS
DETERMINING THE SIZE
1. Measure the circumferential dimension D (distal) of the
residual limb 4 cm above the distal end. The circumferential
dimension minus 0-1 results in the liner size.
P
2. Measure the residual limb length L, 4 cm above distal end to
the level of perineum.
L
3. Measure the circumference of the limb at the level of the
perineum (P).
4. Selection between Standard or Conical Profile
If the proximal circumference (P) is lower than the
standard value shown in the table, a Standard profile (S) is
recommended. If the proximal circumference (P) is higher
than the standard value, a Conical Profile is recommended.
D
4 cm
1. Distal
circum ference D
(height = 4 cm)
1. Liner
size
2. Residual
limb length L
10 – 15
2. Residual
limb length L
15-20
2. Residual
limb length L
20-25
2. Residual
limb length L
25-30
3. Proximal circumference P
2. Residual
limb length L
30-35
2. Residual
limb length L
35-40
24-27 24 – 28 > – 30 > – 33 > – 35 > – 37 > – 40 >
27-31 27 < 31 > < 34 > < 37 > < 39 > < 42 > < 44 >
31-35 31 < 34 > < 37 > < 40 > < 43 > < 46 > < 49 >
35-39 35 < 39 > < 42 > < 45 > < 48 > < 52 > < 55 >
39-43 39 < 43 > < 46 > < 41 > < 54 > < 57 > < 60 >
43-47 43 < S > < S > < S > < S > < S > < S >
47-52 47 < S > < S > < S > < S > < S > < S >
52-57 52 < S > < S > < S > < S > < S > < S >
4. Standard/Conical profile S C S C S C S C S C S C
WWW.OSSUR.COM
68