23.10.2019 Views

TE20 Generator and Alternator wiring diagrams

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

D<br />

F<br />

Ferguson TEA20 Tractor with a <strong>Generator</strong><br />

12V Positive earth system plus Ammeter <strong>wiring</strong> explained<br />

Yellow<br />

May also be grounded<br />

at starter switch<br />

Green<br />

Note! If no Ammeter,<br />

wire directly from<br />

A on Regulator to<br />

the starter switch<br />

as shown<br />

Yellow<br />

Green Strip<br />

-<br />

Black<br />

Ammeter<br />

D<br />

E<br />

A<br />

F<br />

GENERATOR<br />

CONTROL BOX<br />

(REGULATOR)<br />

Yellow<br />

White<br />

Yellow<br />

Green Strip<br />

Charge Indicator<br />

White<br />

Keyed Ignition Switch<br />

ON/OFF<br />

Fuse 15A<br />

Circuit for accessories<br />

if required<br />

Ground return from<br />

accessories, if required.<br />

Terminate on the “-” battery<br />

terminal or any where on<br />

the chassis i.e. the ground<br />

bolt on the starter switch<br />

1 2<br />

+<br />

3 4<br />

DISTRIBUTOR<br />

Firing seq. 1-3-4-2<br />

(Cilinder #1 at front of moter<br />

Red<br />

Black<br />

+ -<br />

LUCAS<br />

COIL<br />

12V<br />

STARTER MOTOR<br />

LUCAS 25079J<br />

Yellow<br />

Green Strip<br />

-<br />

+<br />

12V<br />

Battery<br />

Firing order 1-3-4-2 #1 cylinder is at the front<br />

Negative Earth<br />

Can be grounded to the chassis at<br />

the Oil Filler Casting or the mounting<br />

bolts on the starter motor or one of<br />

the steering housing bolts.<br />

Anywhere will do so long as there is<br />

a good earth connection.<br />

To polarizer the <strong>Generator</strong> to suite the polarity, remove the F & D leads from the <strong>Generator</strong> <strong>and</strong> with a lead connected to the Negative<br />

terminal of the battery, flash the Field “F” terminal on the generator til you see a small spark, then replace the leads in the same position as before.<br />

NOTE! The <strong>Generator</strong> must be attached to the chassis <strong>and</strong> Battery connected to maintain the polarity.<br />

Any break in the system will require the process to be repeated.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!