Best Practice Publication Circular Design

Colophon
Title: Best Practice Publication in Circular Design
Date: 15 October 2019
Editors: Àlex Jiménez
Layout and visuals: Nutcreatives
This publication was created as part of the project: Learning for
Innovative Design for Sustainability-Innovation-L4IDS. The project
was funded by the Erasmus+ Key Action program: Cooperation
for innovation and the exchange of good practices. Action Type:
Knowledge Alliances for higher education.
Contract: 575777-EPP-1-2016-1-ES-EPPKA2- KA.
“The European Commission’s support for the production of this
publication does not constitute an endorsement of the contents,
which reflect the views only of the authors, and the Commission
cannot be held responsible for any use which may be made of the
information contained therein.”
Project Coordinator: Universitat Politècnica de Catalunya (ES)
Module Coordinator: Nutcreatives S.L.
Project Partners: Linkopings Universitet (SE), Nutcreatives SL
(ES), Habermann Design & Development AB (SE), OneOff Design
Furniture Limited (IE), Institute of Designers in Ireland Limited (IE),
Stichting House of Design (NL), Stiftelsen Svensk Industridesign
(SE), Ajuntament de Barcelona (ES), Stichting NHL Stenden
Hogeschool (NL), University of Limerick (IE), Fundació Privada B.C.D.
per la Promoció Del Disseny Industrial (ES), Ceci N’Est Pas Une
Holding BV (NL).
This document is licensed under Creative Commons Attribution-NonCommercial-ShareAlike
4.0 International (CC BY-NC-SA 4.0). You are free to share — copy and redistribute
the material in any medium or format. You are free to adapt — remix, transform,
and build upon the material. You must give appropriate credit, provide a link to the
license, and indicate if changes were made. You may not use the material for commercial
purposes. If you remix, transform, or build upon the material, you must distribute
your contributions under the same license as the original.
4