ARDIENTE
Group Work - See inside
Group Work - See inside
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1. LOCATION
DESIGN
APPLICATION
3. CONNECTIONS
CREADO CON CON UNA UNA VERSI
EADO CON UNA VERSIÓN PARA ESTUDIANTES DE AUTODESK
One of the advantages of the project is that can The product can be easily attached to the existing
be adjustable and located in almost every type of building due to the connexion elements previously
building. Its dimensions can vary according to its assembled in the factory, therefore achieving a
different morphology and requirements, but always demountable concept. These connection elements
with a minimum dimension box of 1.30x6.6 m. Due to are based on 2 metals C-channels (with the respective
its width dimension, it allows being located either in resistant screws) located along the height of the
facades with or without windows, as well as regards product and at both lateral sides. The dimensions that
its CREADO length, which CON can UNA be VERSIÓN adjustable CREADO PARA according CON ESTUDIANTES to UNA the VERSIÓN were DE AUTODESK
PARA analyzed ESTUDIANTES are around 7.5x15x7 DE AUTODESK mm. However,
building height (see Figure XX).
The system consists of:
• 2 modules with dimensions of 1.3x0.5x3.3 m
• 2 interior rooms)
• 2 heat exchangers
• 2 exhaust-air fans
CREADO CON UNA VERSIÓN PARA ESTUDIANTES DE AUTODESK
CREADO CON UNA VERSIÓN PARA ESTUDIANTES DE AUTODESK
It can be mentioned that the number of rooms that are
connected to the facade product can be either for 1 or
2 rooms, therefore the number of heat exchangers and
fans can change accordingly.
2. GEOMETRY
The shape can be modified into different combinations
according to the wind force or sun radiation. More
division faces in the box will bring not only more stability
against wind forces coming from different angles, but
also more optimum surfaces to be heated. The shape
that is chosen to be developed is in the middle of the
options, with a relation between functional-stabilityaesthetical
purposes.
CREADO CON UNA VERSIÓN PARA ESTUDIANTES DE AUTODESK
FIGURE 16: BUILDINGS APPLICATION
14
these connexion elements can easily vary, from U, C,
I profiles, as long as it allows a minimum accessibility
from one of the sides.
FIGURE 15: SHAPE OPTIONS
CREADO CON UNA VERSIÓN PARA ESTUDIANTES DE AUTODES
DIANTES DE AUTODESK
CREADO CON UNA VERSIÓN CREADO PARA CON ESTUDIANTES UNA VERSIÓN DE AUTODESK
PARA ESTUDIANTES DE AUTODESK
CREADO CON UNA VERSIÓN PARA ESTUDIANTES DE AUTODESK