2020 NFFC Catalog WEB

CAL FIRE Spec
The CAL FIRE Spec was created to produce better THL performance while enhancing the overall TPP. The spec utilizes
multiple performance fabrics to increase protection and breathability, while maintaining a RPP (radiant protective
performance) of 10. Certified to NFPA 1977, this lightweight garment is a unique interface design approved by CAL FIRE.
CrewBoss CAL FIRE Jacket
Made out of Tencate Style 469 and Style 362, the CAL FIRE Jacket utilizes an innovative two-fabric
design to improve breathability on the body, while maximizing protection on the arms where it is
needed most. This single layer garment features a bi-swing back for ease of motion, a patch chest
pocket with hook and loop flap closure, an angled radio pocket with hook and loop flap closure and
mic tab, and 2” reflective triple trim on the hem and forearms for added visibility. Features hook and
loop cuff tabs 2” up from the sleeve hem, stand-up style collar with hook and loop closure, hanger
loop at inside center back of the coat below the collar and zippered front closure mounted on
Nomex ® tape and stitched to prevent direct contact with the body.
clothing
INTERFACE CLOTHING
Available in
Tencate Style 469 7.5 oz. and Style 362 5.8 oz. Nomex® Yellow
WSS CFC0122
Size 1-5 6+
S-XL 320.00 304.00
2XL 352.00 336.00
*3XL 368.00 352.00
*Special Order Item
CAL FIRE
Cal/OSHA
NFPA 1977
Classified by UL
CrewBoss CAL FIRE Pant
Based on the CrewBoss Interface Pant, this overpant utilizes Tencate Style 362 fabric to be
protective but breathable. The knees on the CAL FIRE Pant are articulated for ease of mobility,
while slash pass-through pockets and two large semi-bellow cargo pockets with spade-style
flaps with hook and loop closure add to the pants functionality. 2” Triple Trim reflective double
needle stitched 7” up from the pant cuffs provides added visbility. 3” double bar-tacked belt
loops and 2” waistband with elastic. Features hook and loop straps with D-rings to secure the
bottom of the pant cuffs, double stitched front and back crotch reinforcement and zippered
leg closure mounted on Nomex ® tape and sewn to not come in contact with the body.
Available in
Tencate Style 362 5.8 oz. Nomex® Yellow
WSS CFP0122
Waist Inseam 1-5 6+
S-XL 28-36" 320.00 304.00
2XL 28-36" 352.00 336.00
*3XL 28-36" 368.00 352.00
CAL FIRE
Cal/OSHA
NFPA 1977
Classified by UL
*Special Order Item
CrewBoss Interface Pant
Full cut pants feature Nomex ® zipper fly with snap closure, Nomex ® zippered side pass through pockets,
double fabric knees, 2” elastic backband and 7 large belt loops. Pants have unidirectional cargo pockets at
thighs to prevent snagging, Nomex ® zippered leg opening for easy on and off and double back D-ring hook
and loop cuff closures for a tight fit around the boot. 3M Scotchlite Triple Trim around the calves.
WSS AIP7 7.0 oz. Advance
Waist Inseam 1-5 6+
S-XL 28-36” 525.00 499.00
2XL 28-36” 578.00 552.00
*3XL 28-36” 604.00 578.00
WSS TIP 7.0 oz. Tecasafe ® Plus
Waist Inseam 1-5 6+
S-XL 28-36” 262.00 249.00
2XL 28-36” 289.00 276.00
*3XL 28-36” 302.00 289.00
WSS NIP6 6.0 oz. Nomex ®
Waist Inseam 1-5 6+
S-XL 28-36” 395.00 376.00
2XL 28-36” 435.00 416.00
*3XL 28-36” 455.00 436.00
*Special Order Item
Cal/OSHA
NFPA 1977
Classified by UL
order 24/7 nationalfirefighter.com
15