2020 NFFC Catalog WEB

Skid Units
A Skid Unit for Every Rig
Our selection of configurations and components
means we can build units to fit any footprint and any budget.
For more information call 800.423.8347
National Fire Fighter offers an extensive range of skid units to anchor your firefighting arsenal. Mobile attack skid units give you everything
you need to keep the flames under control in a compact, easily adjustable setup that can be mounted to nearly any vehicle or UTV.
Each unit is built and engineered with robust materials and quality workmanship to ensure reliable operation when you’re in the field.
Our units require minimal maintenance, include a high-pressure, low-volume pump to conserve water, and are constructed with the highest
quality components to ensure you’re ready when things get heated. We build top mounts, end mounts, hybrid mounts and ATV/UTV units to
fit within your footprint. Don’t see what you’re looking for here? Call us to discuss your specific needs.
Skid Units
are Equipped With:
• 1/2” polypropylene tank baffled to NFPA specifications with stainless
steel flanges, corners welded inside and out and 3” sight gauge level
window. Top is fully removable for easy access.
• Full-length platform constructed of 2” x 1/8” wall aluminum box
tubing with bracing in appropriate spacing for the size of skid
(End Mount and Hybrid Units)
• Control Panel: flush mount liquid-filled pressure gauge 0-600 PSI,
panel mounted by-pass valve, 50 amp circuit breaker, low pressure
cut-off switch, panel lights
• 2 Discharges - 1” to reel, 1-1/2” overboard with NH male threads
and cap
• 2 Suctions - 2” (tank to pump and NPSH auxiliary)
• 1” pump to tank by-pass
Component Choices and Additional Options listed on page 64.
Top Mount Units
A top mount unit has all components mounted to the top of the unit. This configuration
works well with limited space or for operating the unit from the side of truck. This unit
does not require a skid and therefore does not take up as much space as our other
configurations.
End Mount Skid Units
An end mount skid unit has the pump, control panel and plumbing mounted on the
rear of the unit and will typically have an elevated platform where the reel will be
mounted. In larger applications, the reel could be mounted to a plumbing deck.
This configuration works well for utility bodies or rear access trucks.
Hybrid Skid Units
A hybrid skid unit has the pump, control panel and plumbing mounted on the rear of the
unit, with the hose reel mounted to the top of the tank. This configuration works well if
there is access to the top of the tank or for hose deployment off either side of the unit.
62 order by phone 800.423.8347