You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Preset List
1. If not already there, press VIEW to select Play view.
2. Press the Upper Knob to open the Preset list:
16A Bel Haven, Yo!
16B Pastor of Muppets
16C Stolarskyvision
17A Not Adorable
Reorder
Preset
Snapshot
Turn the Upper Knob to select a preset.
1
PC:061
CC69:000
Turn Knob 1 (Reorder Preset) to move the selected preset up and down the
list.
Turn Knob 2 (Snapshot) to select Snapshot 1, 2, or 3 without having to be in
Snapshot footswitch mode. See "Snapshots" for more information.
Edit View
TIP: The grayed out numbers above Knob 3 represent the messages required
to recall the current preset (PC:XXX) and snapshot (CC69:XXX) from
an external MIDI controller or sequencing software.
HX Stomp has two main views—Play view and Edit view. Edit view is used for creating
or tweaking your tones.
Press
VIEW to select Edit view.
Colored blocks representing amps, cabs, effects, and other items appear on the upper
half of the display and the selected block's parameters appear on the lower half:
16B Pastor of Muppets
Selecting Blocks/Adjusting Parameters
Each preset in HX Stomp can accommodate up to six blocks. Blocks are objects
that represent various elements of a preset, such as amps, cabs, effects, or even a
1 Switch Looper. In addition to the six processing blocks, each preset has an Input
block, Output block, and for presets with two parallel paths, Split and Mixer blocks.
1. While in Edit view, from Stomp footswitch mode, briefly touch
(but don’t press) the footswitch assigned to the block (if any).
If multiple blocks are assigned to a footswitch, touch the top of the switch repeatedly
until the desired block is selected.
Alternatively, turn the Upper Knob to select blocks.
The selected block appears with a white outline:
2. Turn Knobs 1-3 below the screen.
Some blocks have more than one page of parameters. In this case, the center
inspector line will display a thin colored scroll bar:
Harmony Delay
3. Press PAGE or PAGE to access more parameters (if available).
SHORTCUT: For most time-based parameters such as delay time or modulation
speed, press the knob to toggle between setting the value in ms or Hz
and note divisions (1/4-note, dotted 1/8-note, etc.).
Harmony Delay
1/8
37%
35%
Time
Feedbk
Mix
11