HX Stomp Manual - English

Synchronizing Tempo via MIDI
Certain Delay and Modulation parameters such as Time and Speed can be represented
with fixed numeric values (ms or Hz) or note values (1/4-note, dotted 1/8-note,
etc.). When set to note values, the parameter will follow Tap Tempo or incoming MIDI
clock. Press the parameter knob to toggle between ms (or Hz) and note values.
Harmony Delay
750 ms
Time
37%
Feedbk
35%
Mix
Harmony Delay
1/4
Time
37%
Feedbk
35%
Mix
By default, HX Stomp responds to MIDI clock received from external gear (or your
DAW software via USB). HX Stomp can also transmit MIDI clock to external gear or
software (transmit is disabled by default). MIDI clock reception (Rx) and transmission
(Tx) can be enabled or disabled from the "Global Settings > MIDI/Tempo" menu.
In addition, certain modulation effects with have distinct rhythmic elements; for example,
a tremolo set to a square wave (sometimes called a "slicer") not only has a
tempo, but a beat, where the upswing of the wave lands with relation to your song.
That is, the effect may be in perfect tempo sync with your song, but its "downbeat"
may be shifted ahead or behind of your drummer's—or in the studio, your recorded
song's—downbeat.
From Stomp or Scroll mode, on the downbeat of your song, press
TAP once.
Any beat sync-based (sometimes called "LFO") effects reset from the beginning.
MIDI CC
HX Stomp has reserved specific MIDI CC messages for global functions; these CCs
cannot be used as controllers. If you attempt to learn a CC message reserved for
global functions (see "Controller Assign"), the following dialog appears:
This CC# is reserved!
Learn
MIDI CC# Value
Function
Pedal and Footswitch Assignments
1 0-127 Emulates EXP 1 Pedal
2 0-127 Emulates EXP 2 Pedal
49 0-127 Emulates FS1
50 0-127 Emulates FS2
51 0-127 Emulates FS3
52 0-127 Emulates FS4
53 0-127 Emulates FS5
60
61
0-63: Overdub;
64-127: Record
0-63: Stop;
64-127: Play
1 Switch Looper Controls
1 Switch Looper Record/Overdub
1 Switch Looper Play/Stop
62 64-127 1 Switch Looper Play Once
63 64-127 1 Switch Looper Undo/Redo
65
66
0-63: Forward;
64-127: Reverse
0-63: Full;
64-127: Half
1 Switch Looper Forward/Reverse
1 Switch Looper Full/Half Speed
Additional Controls
0 n/a Bank MSB (unused, but reserved)
32 n/a Bank LSB (unused, but reserved)
64 64-127 Tap Tempo
68 0-127 Tuner screen on/off
69 0-2, 8 and 9
70
71 0-5
0-63: Bypass;
64-127: On
Snapshot select (0=Snapshot 1, 1=Snapshot 2,
2=Snapshot 3, 8=Next snapshot, 9=Previous snapshot)
All Bypass
Footswitch Mode (0=Stomp, 1=Scroll, 2=Preset,
3=Snapshot, 4=Next footswitch mode, 5=Previous
footswitch mode)
49