SINUMERIK 840D sl CNC Software with ShopMill ... - Siemens support

More documents

Recommendations

Info

SINUMERIK 840D sl 2011-08-031 CNC Software with ShopMill 1.5 SP4 AP00913012: OMPOCKET(80) - SM message: "Memory no longer available" for program check AP00926620: OMPOCKET(84) - SM_SL program check, message: "No path to generate" spigot, finish edge AP00890947: Tool change, only duplo number (cycle: E_TFS) AP00908990: Incorrect speed after block search. Collected speed is only output if the new tool is exactly the same as the previous tool (e_s_asup) AP00921358: Evaluate spindle mode after block search. Only position help axis if there is no spindle or not in spindle operation. (e_s_asup) AP00890940: Retraction missing in UP -> _E_JS_PRG. (GUD7_JS, E_END, E_HEAD adapted) AP00904899: Screen freezes when renumbering and search replace on (from basis 07.50.22.00) AP00884189: SM SK "inch" cannot be influenced using MD9182 USER_CLASS_INCH_METRIC AP00847012: SM_SL manual workpiece measurement, save measuring point with reset (from NCK 72.08) AP00950890: SM: Cycles Alarm 61099: Block %2: Internal cycle error (1) -> E_SP_RP with G18 Expansion of the operator interface for manual machine. AP00939206: Contents of cmm_single.mpf are not deleted Error corrections, improvements in ShopMill 1.5 HF4 as compared to 1.5 HF2 ===================================================================== AP00497750: Crash troubleshooting installed when calling up the function cmm_dd_download messages. AP00648149: With an inch/metric switchover under Manual > ShopMill settings, Alarm "112503 ShopMill: 3100" is output without any further information about the erroneous GUD variable. AP00641105: Exception when opening Wizard screens (as of Basis 07.50.14.00) AP00644999: Incorrect color display of header icons due to incorrect customer configuration => no change Error corrections, improvements in ShopMill 1.5 HF5 as compared to 1.5 HF4 ====================================================================== New software components NCK Software V72.05.01 and SINAMICS Software V02.50.44.00 Error corrections, improvements in ShopMill 1.5 SP1 HF1 as compared to 1.5 HF5 ====================================================================== - Input screen forms with ‘sub-divided input parameters’ AP00677396: DT-AP00694591: Display G58 in the TSM screen form not correct for re-defined G function AP00621136: Tool Manager: Display problem for tool wear AP00706468: DT-AP00708618: Direct selection of re-defined G codes (G58) does not function in the TSM screen form AP00612983: DT-AP00626865: Graphic representation (dotted-line graphics) of program blocks => graphic files are deleted when booting AP00682097: DT-AP00692900: Alarms/messages are not displayed after ShopMill/ShopTurn has rebooted AP00603651: DT-AP00603885: The free G code line is falsified in the GP (from basis 07.50.18.00 and higher) AP00685333: The interface signal (update tool data) can be eliminated AP00647615: Default values for tool length etc. for INCH setting AP00697957: DT-AP00698301: Incorrect position of the swiveling table after block search AP00697978: DT-AP00698292: Alarm 61099 internal cycle error (2) for manual swiveling AP00689452: DT-AP00689471: OEM tool parameter texts are only displayed in the standard with default texts (from basis 07.50.18.00 and higher) AP00697952: DT-AP00698297: S3D – Unmachined parts/blank definition in includes – incorrect scaling in X and Y in the simulation (from basis 07.50.18.00 and higher) AP00712571: DT-AP00715645: Swiveling screen form, no manual refresh – or incorrect refresh AP00713101: DT-AP00724664: G500 is generated for multiple clamping AP00717958: DT-AP00718439: SM display of the number of zero offsets (table) incorrect © Siemens AG 2011 I DT MC R&D 51 Page 36 of 39 All rights reserved
SINUMERIK 840D sl 2011-08-031 CNC Software with ShopMill 1.5 SP4 Error corrections, improvements in ShopMill 1.5 SP1 HF2 as compared to 1.5 SP1 HF1 ===================================================================== AP00775785: DT-AP00775977: SM Manual mode feed unit is displayed in mm/rev instead of mm/min AP00513021: DT-AP00627061: SM Incorrect program block display BA-AUT after editor changeover (G code) AP00792591: DT-AP00793573: G710: WCS unit inch displayed under Tools/ZO Error corrections, improvements in ShopMill 1.5 SP2 as compared to 1.5 SP1 HF2 ===================================================================== AP00660100: DT AP00660437: Tool name with " ; " AP00801740: DT AP00804072: Tool measurement under program leads to interpreter problem with basic reference AP00836140: DT AP00837497: Circular pocket (e_po_cir) and machining type "helical": Depending on the input sequence, the Alarm 61214 "No pitch progr." is output AP00841370: DT AP00841592: ShopTurn does not start up after NCK Reset. AP00732486: DT AP00732850: Tool loading/unloading: Sporad. message: "Please wait: TOOLMAN being updated" (as from Basis 07.50.21.00) AP00817871: DT AP00817889: The feld J in the contour generator automatically changes to incremental (as from Basis 07.50.21.00) AP00757048: DT AP00765765: Simulation crash with SM 07.50.11 and ERGOline (as from Basis 07.50.21.00) AP00771577: DT AP00771629: SM: The simulation is not always started AP00779762: DT AP00785493: HMI crash in the G code editor (as from Basis 07.50.21.00) AP00800127: DT AP00804491: SM_SL retraction upon deselection of swivelling (TC0) depends on the previous selection AP00768022: DT AP00769761: SM: Replacement of the swivel data record leads to a tool check alarm AP00837688: DT AP00845074: Interpreter problem with straight/circle and feed and mm/teeth AP00821093: DT AP00821854: Optimized rotary axes transferred to CYCLE800. AP00845526: DT AP00853897: SM Incorrect tool display during simulation with 3 rd cutting edge AP00853848: DT AP00853952: SM: Automatic. Left screen empty with basic block display. AP00860168: DT AP00860685: ST frozen after NCK Reset and reselection of Prg. Manager, tools... AP00829200: DT AP00830183: 112400 Alarm "Not included in the tool management", or ; AP00851597: DT AP00853926: Tools the names of which include a comma with multiple clamping AP00660100: DT AP00660437: Tool name with " ; " AP00805174: DT AP00808639: SM_SL ext. prog. selection with FB4 "Prepare start in program line with SSL" AP00868465: DT AP00871496: Retraction to RP after swivelling: Internal cycle error due to epsilonology AP00839729: DT AP00845088: Starting point "auto" is not approached during pocket milling. AP00826363: DT AP00826845: No block search performed for the workstep selected before AP00804529: DT AP00811143: The ShopMill interfaces freezes in the editor (as from Basis 07.50.21.00) AP00855289: DT AP00857661: Machine data list: Supplement MD 18351=2000 for 840Di Sl only Debugs, improvements in ShopMill 1.5 SP3 HF1 with respect to 1.5 SP3 ==================================================================== AP00890809: Swiveling: Retraction with tool change depending on the program structure AP00446575: OMPOCKET(11) – Contour calculation is aborted and an error output AP00984846: Modified contours do initially not become active when being called up again in the program AP00958990: 840Dsl SW1.3 SW1.4 SW1.5 ShopMill error upon tapping with scaling AP00898870: Position circle XA incorrect with pocket (also position Y) (e_ps_cir) AP00984008: SM/ST 1.5 SP3: Asian languages: Cursor control with G code steps (as from basis 07.50.24.00) AP01006474: JOG measuring not functional with active PROG_EVENTS Also see 12. Information about ShopMill: General: Debugs, improvements in ShopMill 1.5 SP4 with respect to 1.5 SP3 HF1 ======================================================= © Siemens AG 2011 I DT MC R&D 51 Page 37 of 39 All rights reserved
Page 1 and 2: s SINUMERIK 840D sl 2011-08-031 CNC
Page 3 and 4: SINUMERIK 840D sl 2011-08-031 CNC S
Page 35: SINUMERIK 840D sl 2011-08-031 CNC S
Page 39: SINUMERIK 840D sl 2011-08-031 CNC S

SINUMERIK 840D sl CNC Software with ShopMill ... - Siemens support

Create successful ePaper yourself

Delete template?

Save as template?