CP3581 - 1042 CG8 B1

Pedal Boxes Actuation
CP5500
FLOOR MOUNTED
PUSH TYPE.
Conventional racing pedal box design
available in 3, 2 and 1 pedal
confi guration, designed for comfort and
control. Ergonomic forged pedals
together with low friction treatments and
a high quality spherical bearing set new
standards in pedal box effi ciency.
PART NUMBERS.
- CP5500- 2
Brake, Clutch & Throttle Assy.
- CP5500- 3
Brake & Clutch Assy.
- CP5500- 7
Brake Pedal Assy.
FEATURES.
- Aluminium base, machined from high
quality die casting.
- Includes forged aluminium alloy Pedals
and Balance Bar.
- Adjustable throttle pedal position.
- Brake and Clutch pedal Ratio 4.85:1.
- Suitable Master Cylinder Ranges.
- CP2623 See page 68.
- CP4623 See page 68.
- Recommended Push Rod Length
- brake 88.0mm.
- clutch 65.0mm.
- Mounting Holes M10.
- Adjuster cable CP2905-18 included with
assembly.
-10mm balance bar fi tted with rubber
boots to prevent dirt ingress.
INTRODUCTION.
AP Racing’s range of pedal boxes are proving to be masterpieces of functional design. Our pedal
boxes represent a major step forward in chassis control, giving driver better feel, greater dexterity,
quicker laps.
All pedal boxes are lightweight, fl exible and ergonomically effi cient, these multi-ratio pedal boxes
are designed to harmonise with the complete range of master cylinders available from AP Racing.
64.00
75.50
114.16
18.50
14.15
A
21.50
CP5500-2 / THREE PEDAL
CP5500-3 / TWO PEDAL CP5500-7 / SINGLE PEDAL
292
9.00
45°
218
75.5 64.0
18.5
22
A-A
45
21
107
A
133.00
105.56
109.6
217.50
62.00 112.14
33.73
12.00 4.50
87.22 109.42
6 POSITIONS AVAILABLE BETWEEN 27 & 52MM DISTANCE
50.00 50.00 55.00
10.00
29.5 74.0 84.0
294.03
218.18
107.29
71.00
10.00
50 50
10
107
B
A
10.00
www.apracing.com +44 (0)24 7663 9595
215
45.45
B
107.29
295.17
108
64.00
6.50
143.50
217.30
B
13.50
45.00
23.50
15.00
107.76
Ø8.00
Ø4.00
23.00 278.50 13.00
74.0
29.5
71.0
10.0
11
Notes:
See notes
from
CP5500-2.
ALL
MOUNTING
HOLES M1
B
50.00
104.00
Hole for throttle
cam. M6x1.00
depth 12mm
Throttle cam
example
Customer to
supply
mounting for CP4623
master-cylinder
mounting for CP2623
master-cylinder
Notes:
See notes from
CP5500-2.
ALL MOUNTING
HOLES M10
13.00
74.00
93.0
B
60.5
Notes:
1. Brake and Clutch
pedal ratio 4.85/1
2. Clutch pedal shown
at mid-point Brake
pedal shown at
maximum position
Throttle pedal position
to be set by customer
to suit driver
3. A sachet of 6 studs
and a sachet of
Loctite are provide with
the Pedal box. Studs
are to be threadlocked
into their mountings.
77