Punching Information - Alfra
Punching Information - Alfra
Punching Information - Alfra
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
A<br />
ALFRA DIN Rail Cutting Unit – Duo<br />
Made in Germany by ALFRA<br />
For the most popular carrier rails, with hand lever operation<br />
Exactly and easily cuts profile and earthing rails.<br />
Standard version for TS 35/7,5 + 35/15 mm<br />
n Rail-support-element for cutting a 90°-angle exactly<br />
n With reinforced eccentric that lies directly above the shearing blade<br />
n Less use of force due to better force transfer<br />
n Maintenance free<br />
n Shearing blade can be resharpened<br />
n Burr-free cutting without loss<br />
n Length stop 1000 mm<br />
n Easy assembly on the work bench<br />
n Measure alignment metric and inch<br />
Prod.-No.<br />
Standard version, complete with Length stop 03199<br />
and rail-support-element<br />
Carrier rails<br />
Carrier rail 35 mm/7,5<br />
Acc. to EN 60715<br />
Carrier rail 35 mm/15<br />
Acc. to EN 60715<br />
A/36<br />
Rail-support-element<br />
for cutting a 90°-angle exactly<br />
Prod.-No. 03199<br />
Reinforced<br />
eccentric<br />
Length stop<br />
1000 mm<br />
metric and inches<br />
Shearing blade