Punching Information - Alfra

ALFRA busbar cutting machine – S 160
Made in Germany by ALFRA
For clean cutting of copper and aluminium busbars up to 160 x 15 mm max.
n Cutting time depends on width/thickness of the busbar: 10 -15 sec.
n Down-holder and guiding device for centrical and accurate cutting.
n Top knife guided sidewise; exchangeable and resharpenable.
n After cutting operation automatic shutdown via micro switch.
Technical Data:
Copper and aluminium busbars 160 x 15 mm (max.)
Cutting width 10 mm
Hydraulic cylinder Single-acting
Knife retraction Spring
Operation pressure max. 0 - 500 bar
Dimension L x W x H: 335 x 268 x 465 mm
Weight 38 kg
Scope of supply:
Basic machine cpl. with quick coupling, guiding device, down holder,
2 carry handles
Prod.-No.
Busbar cutting machine S 160 03253
Spare top knife S 160/08 03254
Foot switch with START – STOP – OFF function 03865
As drive we recommend our ALFRA hydraulic pump 03852
SC 05 III B with adjusted safety shutdown
or
Electro hydraulic pump AHP 03-01 03853
Optional available:
Foot switch with 2-pedals; start-off function 03866
Image surface cross section; reworking
(regrinding) by the customer recommended
Cutting waste
Prod.-No. 03253
Prod.-No. 03852
Cutting-time approx. 10 - 15 sec.
Prod.-No. 03853
Cutting-time approx. 50 sec.
A
A/51