Punching Information - Alfra

Splitter Punching Tools - Tristar – Sets
3-fold splitter punch and die • Made in Germany by ALFRA
n All sets are delivered in robust and practical plastic boxes.
n We gratefully accept your special equipment requirement.
Tristar Set – Metric Prod.-No.
for mild steel (F = 370 N/mm 2 ) 01754
Content: 6 Dimensions,
each of 1 punch and die
M 12/16/20/25/32/40
1 BB-screw Ø 6.0 x 40.0 mm
1 BB-screw Ø 9.5 x 50.0 mm
1 BB-screw Ø 19.0 x 55.0 mm
1 Pre-drill HSS Ø 10.0 mm
1 Tin of lubricating paste
Tristar Set – Metric Prod.-No.
for mild steel (F = 370 N/mm 2 ) 01755
Content: 7 Dimensions,
each of 1 punch and die
M 16/20/25/32/40/50/63
2 BB-screw Ø 9.5 x 50.0 mm
1 BB-screw Ø 19.0 x 55.0 mm and 19.0 x 75.0 mm
1 Pre-drill HSS Ø 10.0 mm
1 Tin of lubricating paste
Tristar Set – PG Prod.-No.
for mild steel (F = 370 N/mm 2 ) 01750
Content: 6 Dimensions,
each of 1 punch and die
PG 9/11/13/16/21 and Ø 30.5
2 BB-screw Ø 9.5 x 50.0 mm
1 Pre-drill HSS Ø 10.0 mm
1 Tube lubricating paste
Tristar Set – PG Prod.-No.
for mild steel (F = 370 N/mm 2 ) 01751
Content: 10 Dimensions,
each of 1 punch and die
PG 9/11/13/16/21/29/36/42/48 and Ø 30.5
2 BB-screw Ø 9.5 x 50.0 mm
each 1 BB-screw Ø 19.0 x 55.0 mm and 19.0 x 75.0 mm
1 Pre-drill HSS Ø 10.0 mm
1 Tin of lubricating paste
Inch sizes are available on request
Prod.-No. 01754
Prod.-No. 01755
Prod.-No. 01750
Prod.-No. 01751
A
A/7