Revel Ultima Studio™ Loudspeaker

SPECIFICATIONS (CONTINUED)
Frequency Responses: Listening Window Response;
(continued) + 1.5 dB from 31 Hz to 20 kHz
This improved “on-axis” measurement reduces the visual confusion
of inaudible local interference, yet still retains full accuracy without
using “spectral smoothing” which results in significant data loss.
Low Frequency Extension;
-10 dB @ 22 Hz, -6 dB @ 26 Hz, and
-3 dB @ 33 Hz
Studies have shown that the -10 dB low frequency extension specification
is the one that best correlates to controlled listening tests.
At low frequencies, most loudspeaker/room combinations will
exhibit significant “room gain”, which is an increasing rise in level
as frequencies decrease. In addition, the -10 dB specification reflects
the steepness (i.e., order) of the low-frequency roll-off, which is not
significantly indicated in -3 dB specifications.
Dimensions: 43 7⁄ 8"H x 12 3⁄4"W x 19 3⁄8"D
1,114 mm H x 324 mm W x 492 mm D
(include grilles; add 11⁄ 2" or 38 mm for spikes;
also refer to Figure 17 below)
Weight: 164 lb (74.4 kg) each carton
Revel constantly strives to update and improve existing products, as well as create new ones. Therefore the specifications
and construction details in this and related Revel publications are subject to change without notice. Revel is
a registered trademark of Revel, Inc.
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
22
12 3/4"
(324 mm)
REVEL ULTIMA STUDIO
Owner’s Manual
1 1/2"
(38.1 mm)
43 7/8"
(1,114 mm)
19 3/8"
(492 mm)
Figure 17. Overall dimensions
for the REVEL ULTIMA
STUDIO loudspeaker.