Operating instructions Urban Milk Shuttle Calf milk ... - Demsa Genetik

6.4 Removing/dosing feed
6.4.1 Manual removal
Figure 6.4.1/1: Manually removing the feed
1. Open the lid closures of the feed container.
2. Place an appropriate container underneath the outlet.
3. Open the drain valve by moving the valve lever in the direction of the arrow.
4. Remove the required amount of feed.
27
Operation
5. Close the drain valve by moving the valve lever against the direction of the arrow.
6.4.2 Automatic dosing (optional)
Figure 6.4.2/1: Activate the pump nozzle
1. Open the lid closures of the feed container.
➊
➋ ➊ Activate the trigger
➋ Fix with locking device
(2 levels are possible)
2. At the "Dosing" operating panel (see Figure 4.3.4/1) use + /
required dosing type ("Time dosing" or "Sensor dosing").
–
to select the
3. Press the preselection key for the required amount ( 1 , 2 or 3 ).
4. Remove the pump nozzle from the drawbar holder and hold over the intended
container.