Edition 68 (October-December, 2022)

Company News
has been clear to us that LiSEC tops
the list when it comes to machinery
construction.”
The software is also impressive:
“Machines are one thing, but the
software behind them makes a big
difference too. The installation went
without a hitch - we had nothing to
worry about. Our LiSEC software
contact worked together with my
colleague Gerhard Czervenka to
compile all the basic data and update
the master data and the whole thing
was up and running.”
Mr Felbermayer highlighted the
advantages of obtaining solutions from
a single source: “With the project
being highly complex in nature, it
was hugely beneficial to work with
LiSEC - because everything came
from a single source. LiSEC is actually
the only machine manufacturer
that can supply all the elements
you need: Machinery, software and
services. Thanks to the all-in-one
solutions at LiSEC, all coordination
takes place internally and you don’t
really notice (or only rarely notice)
the coordination and planning
measures that are taking place in
the background - yet another huge
advantage with LiSEC: they make it
look easy!”
Felbermayer was also impressed
with the electronic plans. Planning
had to be accurate down to the
last centimetre here, because all
connections are in the ground and
were laid before the concrete slab
was cast. Mr Felbermayer emphasises
that although other suppliers also
offer good stand-alone machines,
you just cannot beat LiSEC when it
comes to high-quality fully automatic
machinery and high-output processes.
The LiSEC fleet of machines at
Felbermayer
It was not only the range of machines
and software that impressed Mr
Felbermayer: “I believe that the
machinery construction is more
carefully thought-out than in other
companies. The development
phase takes longer than that of the
competition. It is clearly apparent in
the workmanship and components
that everything is very coherent. The
LiSEC design department does an
excellent job.”
The LiSEC machinery fleet at
Felbermayer includes the following
machines: PKL/SBL, ESL-RS, two
VSL-A stations, KSR, GSL, VHW-F,
ARL, TPA-A, AGP-A, VFL-1F as
well as automatic tempering bed
loading and unloading. The glass is
loaded by the PKL/SBL glass gantry
loading system. With its rotating
double suction frame, the system
is able to stack large format sheets
automatically and precisely.
In addition to cutting flat glass
using the LiSEC ESL-RS cutting
table, Felbermayer has two LiSEC
VSL-A cutting systems with Dynamic
Load Balancing for cutting laminated
glass. This is an intelligent form of
dynamic utilisation control that can
achieve a high output. The edges
are seamed with the LiSEC KSR
processing machine.
Once the quality has been checked
by the GSL quality scanner, the
sheets are sorted into the ASM sorting
magazine by the SHL glass transport
shuttle. The system is able to pick
up glass lites sheets vertically and
horizontally, buffer and transfer the
90 Glass Bulletin | October - December, 2022