Titanium for subsea and offshore industry catalogue
subseatitanium.com The potential applications of titanium in the Marine Engineering Department can be referred to as follows: • Titanium has excellent corrosion resistance and mechanical properties, making it an ideal material for use in marine environments. Potential applications of titanium in the Marine Engineering Department include: • Titanium alloys for marine components such as propeller shafts, hulls, and offshore platforms. • Titanium coatings for offshore structures to enhance their corrosion resistance. • Titanium-based composites for marine structures and components, including propellers and pumps. • Titanium heat exchangers for seawater desalination and other marine applications. • Titanium-based materials for marine renewable energy devices such as tidal turbines and wave energy converters. Subseatitaniuim.com Offshoretitanium.com info@bydtitanium.com
subseatitanium.com
The potential applications of titanium in the Marine Engineering Department can be referred to
as follows:
• Titanium has excellent corrosion resistance and mechanical properties, making it an ideal
material for use in marine environments. Potential applications of titanium in the Marine
Engineering Department include:
• Titanium alloys for marine components such as propeller shafts, hulls, and offshore
platforms.
• Titanium coatings for offshore structures to enhance their corrosion resistance.
• Titanium-based composites for marine structures and components, including propellers
and pumps.
• Titanium heat exchangers for seawater desalination and other marine applications.
• Titanium-based materials for marine renewable energy devices such as tidal turbines and
wave energy converters.
Subseatitaniuim.com
Offshoretitanium.com
info@bydtitanium.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Flow Subsea PD Meters
Our Subsea PD Flow Meters are available in a wide
variety of flow ranges and electrical outputs, as well
as a variety of exotic materials for highest corrosion
resistance and material compatibility.
0.006 - 2 l/min 1035
bar version with
Burton Connector.
Electronics are housed in a separate vessel allowing
interchangeability and spares to be held separate to the meter.
Only high grade steels are used in the production of the meters,
short response times ,high resolution ,high turn down ratios ,
make these meters ideal for very low flow applications.
Two precise gears rotate freely inside the measuring chamber.
The fluid passes through and causes rotation of the gears, their
rotational frequency is proportional to the flow rate and we use a
non intrusive subsea sensor to measure through the housing wall.
Working Pressure: Internal up to 15,000 psi (1,035 bar), external up
to 6,000m depth.
Communications:
Connections:
Accuracy:
Analog (4-20mA), Amplified Pulse,
Pulse, RS232
BSP NPT, Autoclave,
±0.5% of measured value. A calibration
certificate is provided based on a
representative viscosity fluid for
the application.
Pressure Loss / Viscosity / Flow Rate
Typical ETLFLOW-200-SSEA-3L
Typical ETLFLOW-200-SSEA-25L
info@bydtitanium.com
Change language