COMPUTER PROGRAM USER'S MANUAL FOR ... - CAFE Foundation

1.
2.
3.
4.
5.
6.
7.
a.
9.
10.
Card number
Initial diameter
Increment in diameter if a range of diameters are to be computed
Number of diameters
Initial activity factor (80-200 AF)
Increment of activity factor if a range of AF is to be computed
Number of activity factors
Initial number of blades (2-8 blades)
Increment in number of blades, if a range of blades is to be computed
Number of number of blades
Card 5 contains the following input data in a (213, 5F6.0) format.
1.
2.
3.
4.
5.
6.
7.
Card number
Number of operating conditions with a maximum of 10
Initial integrated design lift coefficient (0.3 to 0.8 C )
Li
Increment of integrated design lift coefficient if a range of C is to be
computed Li
Number of C 's
L
i
For reverse thrust calculation option if blade angle P radius is given,
3/4
code 2. If p3/4 radius is to be computed, code 1.
For reverse thrust calculation option, code 1. for turbine engines and 2.
for reciprocating engines.
Subsequent cards are coded as follows with (3X, I3, 10F6.0) format for each
operating condition. The number of these cards must be equal to the number specified
in 2 on card 5.
1. Computational option