Service Bulletin Index - Johnstone Supply

More documents

Recommendations

Info

Goodman Manufacturing Company, L.P. Technical Services Department 1810 Wilson Parkway / Fayetteville, TN 37334 (888) 593-9988 FAX (931) 438-2273 DATE: June 29, 2005 TO: All Service and Parts Managers SUBJECT: New Service Bulletin Numbering System Goodman Technical Services is pleased to announce the release of a new service bulletin numbering system. The new service bulletin numbering system is divided up into specific product groups (i.e. remotes, furnaces and package units), and below are the details of how the new numbering system works: ♦ SA - All Products (Remotes, Furnaces and Package Units) ♦ SF - Furnaces (80% and 90% Furnaces and Accessories) ♦ SP - Package Units (Package Units and Accessories) ♦ SR - Remote Units (Remotes, Air Handlers, Coils and Accessories) The new service bulletin numbering system has been changed to eliminate the need for producing two bulletins covering the same issue on Amana® and Goodman® products, since we are one company with two brands of products. As new bulletins are released, subsequent bulletins will be consistent with this new numbering system. We feel this new numbering system will be easier to manage and eliminate the need for us along with you to maintain the bulletins in two separate locations or distribute the bulletins through separate distribution channels. ® Is a trademark of Maytag Corporation and is used under license to Goodman Company, L.P. All rights reserved. ©2005 Goodman Manufacturing Company, L.P. Fayetteville, TN 37334 SERVICE BULLETIN SA-001
Goodman Manufacturing Company, L.P. 1810 Wilson Parkway / Fayetteville, TN 37334 (888) 593-9988 FAX (931) 438-2273 IMPORTANT PARTS-SERVICE COMMUNICATION TO: All Service and Parts Managers DATE: May 20, 2005 NO: CAG - 483 SUBJECT: ARUF032-00A-1B and ARPT032-00C-1B Air Handler Blower Motor Noise We have received some field reports concerning a high pitched blower noise on some ARUF032 and ARPT032 air handlers. After investigating the issue, it has been determined that the blower wheel and motor combination used in the two air handler models listed above, may create a harmonic noise in certain applications and under certain circumstances. If this issue is experienced with any ARUF032-00A-1B or ARPT032-00C-1B air handler already installed in the field, we are recommending replacement of the blower motor and wheel with the following Blower Motor/Wheel Kit, Part # 0270A00026S. WARNING To avoid property damage, personal injury or death due to electrical shock, disconnect the electrical power supply before servicing this unit. Some models will have two power sources, so be certain to disconnect both power sources. This may include the indoor unit as well as the outdoor unit. Installations Instructions for Blower Motor/Wheel Kit, Part # 0270A00026S 1. Disconnect blower motor wires from control board and capacitor. 2. Remove blower housing from the air handler. 3. Remove the motor and blower wheel from the blower assembly. 4. Replace these parts with the new motor and blower wheel supplied with kit, Part # 0270A00026S. 5. Reinstall blower assembly in air handler and reconnect wires to control board and capacitor. Note: Refer to wiring diagram on unit to properly reconnect blower wires to control board and capacitor. 6. Install blower door and reconnect electrical power supply. 7. Check blower operation to verify blower noise has been eliminated. ® Is a trademark of Maytag Corporation and is used under license to Goodman Company, L.P. All rights reserved. ©2005 Goodman Manufacturing Company, L.P. Fayetteville, TN 37334
Page 1 and 2:
Service Bulletin DATE: August 15, 2
Page 3 and 4:
Service Bulletin Index Svc Bulletin
Page 5 and 6:
Page 7 and 8:
Svc Bulletin Date Service Bulletin
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Service Letter Index Svc Bulletin D
Page 23 and 24:
Service Letter Index Svc Bulletin D
Page 25 and 26:
Service Bulletin DATE: October 17,
Page 27 and 28:
Service Bulletin DATE: June 15, 200
Page 29 and 30:
Service Bulletin DATE: May 9, 2007
Page 31 and 32:
Service Bulletin DATE: February 14,
Page 33 and 34:
Service Bulletin DATE: July 10, 200
Page 35 and 36:
Service Bulletin DATE: April 18, 20
Page 37 and 38:
Page 39 and 40:
Technical Services Department • 1
Page 41 and 42:
CAUTION! FOLLOW DIRECTIONS BEFORE A
Page 43 and 44:
Service Bulletin DATE: December 6,
Page 45 and 46:
Goodman Manufacturing Company, L.P.
Page 47 and 48:
Service Bulletin DATE: June 26, 200
Page 49 and 50:
Diagram Section with wiring correct
Page 51 and 52:
Service Bulletin DATE: February 27,
Page 53 and 54:
Page 55 and 56:
Service Bulletin SF-010 DATE: Febru
Page 57 and 58:
Service Bulletin SF-008 DATE: Febru
Page 59 and 60:
Service Bulletin DATE: January 12,
Page 61 and 62:
Service Bulletin DATE: November 3,
Page 63 and 64:
Service Bulletin DATE: November 8,
Page 65 and 66:
Service Bulletin DATE: October 19,
Page 67 and 68:
4. Replace the panels previously re
Page 69 and 70:
Service Bulletin DATE: March 13, 20
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
TP-106A 4. Liquid Line Solenoid - a
Page 77 and 78:
TP-106A length from oil traps to th
Page 79 and 80: TP-107A 4. Liquid Line Solenoid - a
Page 81 and 82: TP-107A 3. An oil trap is required
Page 83 and 84: Service Bulletin DATE: September 22
Page 85 and 86: Service Bulletin DATE: August 15, 2
Page 87 and 88: Technical Services Department • 1
Page 89 and 90: Figure 1 2.375" Technical Services
Page 93 and 94: Service Bulletin DATE: April 28, 20
Page 95 and 96: INDUSTRIAL / HVAC/R PRODUCT CORROSI
Page 97 and 98: Service Bulletin DATE: April 24, 20
Page 99 and 100: Service Bulletin DATE: March 13, 20
Page 101 and 102: Replacement Coil Part # Replacement
Page 103 and 104: Goodman Manufacturing Company, L.P.
Page 105 and 106: Unit Compressor Capacitor MFD / Vol
Page 107 and 108: Unit Compressor Capacitor MFD / Vol
Page 109 and 110: Goodman Company, L.P. Technical Ser
Page 111 and 112: Goodman Manufacturing Company, L.P.
Page 113 and 114: Service Bulletin DATE: September 12
Page 117 and 118: Service Bulletin DATE: June 11, 200
Page 119 and 120: Service Bulletin DATE: November 10,
Page 121 and 122: Page 2 of 3 SA-003 There is no medi
Page 123 and 124: Service Bulletin SA-002 Rev 3 Super
Page 125 and 126: SA-002 Rev 3 Provided with each End
Page 127 and 128: X13 Motor Cross Reference List Curr
Page 129: X13 Motor Kit Cross Reference List
Page 133 and 134: Page 2 of 2 CAG-482 ALTERNATE ADJUS
Page 135 and 136: HAC Technical Services Fayetteville
Page 145 and 146: Page 3 of 4 CAG-475 Distributor/Dea
Page 149 and 150: Page 2 of 4 CAG-472 4. Two-Stage Co
Page 151 and 152: System Charging CAG-472 R-410A cond
Page 153 and 154: Figure1 New AFE18-60A All Fuel Boar
Page 159 and 160: The hex adapter, where the arrow is
Page 167 and 168: Bristol Cap Vendor Part # Bristol t
Page 169 and 170: Bristol Cap Vendor Part # Bristol t
Page 177 and 178: Thermostat Wiring Schematics below,
Page 181 and 182:
HAC Technical Services Fayetteville
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
11. Section 10 has been changed to
Page 189 and 190:
Page 2 of 4 CAG-448 Most refrigeran
Page 191 and 192:
Page 4 of 4 CAG-448 4. Piston size
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
® Is a trademark of Maytag Worldwi
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 2 of 2 CAG-432 PGA, PGB and PG
Page 213 and 214:
Page 215 and 216:
Page 2 of 2 CAG-429 Rev 1 FILING PR
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
30/60 Location for Double Row Coils
Page 223 and 224:
Package Heat Pump Units When instal
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
FILING PROCEDURES: Amana will pay a
Page 231 and 232:
FILING PROCEDURES: Installed Units
Page 233 and 234:
Page 2 Start Self Check Ignition Ma
Page 235 and 236:
Page 4 Start Check Turn gas supply
Page 237 and 238:
Page 239 and 240:
Installation Procedures 1. Disconne
Page 241 and 242:
HEATER B0X # 20020701 HEATER BOX-BA
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
BLOWER ASSY. BOLTS 12 PIN CONNECTOR
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
FILING PROCEDURES: If the RHE Low P
Page 259 and 260:
Page 261 and 262:
Publications 319/622-5511 Amana, Io
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
It is Amana's desire to have only t
Page 273 and 274:
Page 275 and 276:
Service Publications 319/622-5511 A
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
AMANA REFRIGERATION, INC. • AMANA
Page 283 and 284:
Page 285:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Aeroquip Aeroquip Corporation Corpo
Page 298:
4. The unit must be installed in ac
Page 303 and 304:
The manifold assembly kits for the
Page 305:
Page 388 and 389:
SOFT SOFT START START KIT KIT AMANA
Page 390 and 391:
HARD HARD START START KITS KITS AMA
Page 392 and 393:
COMPRESSOR COMPRESSOR COMPRESSOR CO
Page 394 and 395:
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404:
Page 563 and 564:
Page 565 and 566:
Page 567 and 568:
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 2 of 5 GF-166 Even when contro
Page 579 and 580:
To prevent a gas explosion and fire
Page 581 and 582:
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Page 589 and 590:
Page 591 and 592:
Page 593 and 594:
Page 595 and 596:
Page 597 and 598:
Page 2 of 2 GF-153 Rev. 1 Should yo
Page 599 and 600:
Page 601 and 602:
Page 603 and 604:
Page 605 and 606:
GF-147-B The distributor will summa
Page 607 and 608:
Page 609 and 610:
The distributor will summarize the
Page 611 and 612:
24" MAX COMBUSTION AIR INTAKE 90°
Page 613 and 614:
Page 615 and 616:
Page 617 and 618:
Page 619 and 620:
Bulletin Date February 24, 1998 No
Page 621 and 622:
Page 623 and 624:
# of Inside Elbow s Vent Pipe Diame
Page 625 and 626:
Page 627 and 628:
All claims for credit under this pr
Page 629 and 630:
â Air Command ® 80SSE Induced Dra
Page 631 and 632:
Page 633 and 634:
Page 635 and 636:
1. Induced Draft Blower Assembly Re
Page 637 and 638:
Page 639 and 640:
Page 641 and 642:
UPFLOW FURNACE MODELS GUIA, GUIB, G
Page 643 and 644:
Branch and Distributor Part Invento
Page 645 and 646:
Induced Draft Blower Assembly Repla
Page 647 and 648:
Page 649 and 650:
Page 651 and 652:
Page 653 and 654:
Page 655 and 656:
Page 657:
, 10384201 INSTALLATION INSTRUCTION
Page 660 and 661:
Page 662 and 663:
This Category IV Direct Vent Furnac
Page 664 and 665:
D. SIZING OF EXHAUST VENT AND COMBU
Page 666 and 667:
F. ADDITIONAL CANADIAN VENTING REQU
Page 668 and 669:
GF-110 2. CHECK FOR PROPER UNE POLA
Page 670 and 671:
Page 672:
Page 680 and 681:
Page 682 and 683:
R0158703 Installation Instructions
Page 684 and 685:
GF-102 CHECKING PRESSURE CONTROL WA
Page 686 and 687:
Page 689 and 690:
Amana has provided information abou
Page 691 and 692:
(c) Mark the location of the two mo
Page 693:
Page 727:
12 Mount new control with one (1) m
Page 756 and 757:
Page 758:
R0158191 R0158191 INSTALLATION INST
Page 763 and 764:
Page 765 and 766:
Goodman Publications Department Fay
Page 767 and 768:
Page 2 of 4 FP-0015 2. Section 1 of
Page 769 and 770:
DO NOT include the PRF or Debit Mem
Page 771 and 772:
Page 773 and 774:
Page 775 and 776:
Page 777 and 778:
Page 779 and 780:
Page 781 and 782:
Page 783 and 784:
4. PACKAGE PRODUCTS a. Compressors,
Page 785 and 786:
Page 2 P-1062-B 7. Interface Boards
Page 787 and 788:
Page 789 and 790:
P-1062A-B C. FURNACE PRODUCTS 1. Al
Page 791 and 792:
Page 793 and 794:
Service Bulletin PTAC-066 DATE: Oct
Page 795 and 796:
Page 797 and 798:
The control can be configured to op
Page 799 and 800:
Page 801 and 802:
CAG-449 c. Part Warranty - replacem
Page 803 and 804:
Page 805 and 806:
Page 807 and 808:
Page 809 and 810:
Page 811 and 812:
Page 813 and 814:
Page 815 and 816:
Service Bulletin PTAC-041-B Rev. 2
Page 817 and 818:
Page 819 and 820:
Front Desk Control - The front desk
Page 821 and 822:
Fuse - Each control board is fused.
Page 823 and 824:
WARNING To prevent death, personal
Page 825 and 826:
Disassembly to access Control Board
Page 827 and 828:
Fuse - Each controll board is fused
Page 829 and 830:
NOTE: The room ambient air temperat
Page 832:
Page 836 and 837:
Page 838 and 839:
Page 840 and 841:
Page 842:
Page 846 and 847:
Page 849 and 850:
Page 851 and 852:
WARRANTY NOTE: An "A' labor rate ma
Page 853:
2. Install the PTAC chassis. 3. Lif
Page 856 and 857:
Page 858 and 859:
Page 860 and 861:
Page 862 and 863:
Page 864 and 865:
PTAC-13A 3) Upon rework completion
Page 885 and 886:
Service Communication DATE: 1/13/20
Page 887 and 888:
Service Communication DATE: 1/25/20
Page 889 and 890:
Page 891 and 892:
Page 893 and 894:
I g n i t e r T e m p I g n i t e r
Page 895 and 896:
Installed Units Amana will pay clas
Page 897 and 898:
HAC Technical Service 931/438-2224
Page 899 and 900:
Page 901 and 902:
Page 903 and 904:
Page 907 and 908:
Page 909 and 910:
TP-107C Table 2 below lists multipl
Page 911 and 912:
Page 913 and 914:
TP-106C Table 2 below lists multipl
Page 915 and 916:
Page 917 and 918:
Page 919 and 920:
Page 921 and 922:
Page 923 and 924:
Page 925 and 926:
Page 927 and 928:
Page 929 and 930:
Page 931 and 932:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 933 and 934:
All GPG10 &12* model units manufact
Page 935 and 936:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 937 and 938:
Page 939 and 940:
Page 941 and 942:
3/4" TEMPERED WATER TO HOUSE. BY T&
Page 943 and 944:
Page 945 and 946:
Installed Units: S-200 Rev. 2 Goodm
Page 947 and 948:
Page 949 and 950:
Page 951 and 952:
GMV8* - Label Part # 22312804 GMV9*
Page 953 and 954:
Page 955 and 956:
The hex adapter, where the arrow is
Page 957 and 958:
Page 959 and 960:
Page 961 and 962:
Today Date: To: Technical Services
Page 963 and 964:
The following figure provides a vis
Page 965 and 966:
The following figure provides a vis
Page 967 and 968:
Bristol Cap Bristol to Bristol Svc
Page 969 and 970:
Page 971 and 972:
Page 973 and 974:
Page 975 and 976:
Page 977 and 978:
Page 979 and 980:
12. Section 11 lists the part sourc
Page 981 and 982:
Page 983 and 984:
11. Section 10 has been changed to
Page 985 and 986:
Page 987 and 988:
TABLE 2. LOSSES FROM SUCTION LINE E
Page 989 and 990:
Page 991 and 992:
Consumer Product Safety Commission
Page 993 and 994:
WARNING Submerged gas control valve
Page 995 and 996:
SERVICE COND.COIL ASM. 12625-01 126
Page 997 and 998:
SERVICE EVAP. COIL ASM. Package Gas
Page 999 and 1000:
Package Heat Pump Replacement Conde
Page 1001 and 1002:
Page 1003 and 1004:
Page 1005 and 1006:
Page 1007 and 1008:
Page 1009 and 1010:
Page 1011 and 1012:
Applications for altitudes in exces
Page 1013 and 1014:
Page 1015 and 1016:
Page 3 of 4 Service Bulletin S-165
Page 1017 and 1018:
Page 1019 and 1020:
Page 1021 and 1022:
Page 1023 and 1024:
Page 1025 and 1026:
Page 1027 and 1028:
Page 1029 and 1030:
Page 1031 and 1032:
Page 1033 and 1034:
Page 1035 and 1036:
CENTRAL AIR CONDITIONING WARRANTY P
Page 1037 and 1038:
Page 1039:
Page 1047 and 1048:
Although similar in appearance to t
Page 1049 and 1050:
GMNT COLLECTOR BOX REWORK INSTRUCTI
Page 1051:
MODEL SERIAL NUMBER GMNT COLLECTOR
Page 1054 and 1055:
Page 1056 and 1057:
DSK-00 DSK-01 DSK-02 DSK-02 DSK-03
Page 1058 and 1059:
Page 1060:
HEAT EXCHANGER RETURN FORM For Dist
Page 1063 and 1064:
HEAT EXCHANGER RETURN FORM For Dist
Page 1065 and 1066:
Page 1068 and 1069:
Page 1070 and 1071:
Page 1073 and 1074:
Page 1076 and 1077:
Page 1078 and 1079:
Internal Crankcase Heaters If an or
Page 1080 and 1081:
Heat Exchanger Inspection - When pe
Page 1082 and 1083:
Heat Exchanger Inspection - When pe
Page 1084 and 1085:
Page 1086:
Page 1089 and 1090:
LABOR ALLOWANCE REQUEST FORM Contra
Page 1091 and 1092:
BULLETIN S-110 LABOR ALLOWANCE REQU
show all

Service Bulletin Index - Johnstone Supply

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?