06.02.2024 Views

February 2024

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Roofing Updates<br />

CCPI FOCUS FOR SIKA<br />

For further info on all these updates and more, visit www.total-contractor.co.uk<br />

Sika has established itself as an early<br />

adopter of the Code for Construction Product<br />

Information (CCPI), which has been published<br />

to drive higher standards in the presentation<br />

of construction product information within<br />

the manufacturing industry.<br />

Sika is one of the first product manufacturers to<br />

have achieved CCPI verification of its first four<br />

product sets for Single Ply Roof systems (gained<br />

in September), Hot Melt Structural Waterproofing,<br />

Liquid-applied and Reinforced Bituminous Roof<br />

Systems. The company says it maintains a strong<br />

focus on transparency, and by committing to the<br />

code it will provide further independent assurance<br />

and greater confidence in the information<br />

associated to its CCPI-verified product-sets.<br />

“We are delighted that Sika is an early adopter of<br />

the code,” said Mark Gatrell – Head of Business<br />

Unit Roofing for Sika in the UK. “In September we<br />

announced product set verification for our Single<br />

Ply Roof Systems, and now we have the pleasure<br />

of announcing that our Hot Melt Structural<br />

Waterproofing, Liquid-applied and Reinforced<br />

Bituminous Roof Systems have now achieved<br />

verification status. The Code is aiming to drive<br />

the highest standards in product information,<br />

setting a level playing field for all construction<br />

manufacturers to ensure that the information<br />

they provide is clear, accurate, up to date and<br />

unambiguous. We’re proud to be working<br />

proactively with the CCPI to raise standards in<br />

product information management.”<br />

www.sika.co.uk/roofing<br />

SWIFTRIDG & SWIFTRIDG+ SYSTEMS LAUNCHED<br />

Hambleside Danelaw has announced the launch of SwiftRidg and SwiftRidg+, the<br />

manufacturer’s new lead alternative GRP Roll Top Ridge and Hip Systems.<br />

The manufacturer says the patent pending SwiftRidg and SwiftRidg+ (GB Patent Application No:<br />

2308115.1) offer a light and durable alternative to lead, zinc, copper, and galvanised steel roll<br />

systems, and they are designed for use with slate and plain tile roofs at pitches from 20º to 50º.<br />

Tested by BRE to resist wind speeds exceeding 110mph, SwiftRidg and SwiftRidg+ come with a 20-<br />

year service life guarantee and are compliant with the requirements of BS 5534 and BS 8612. Hambleside Danelaw says there is no toxic or<br />

contaminated run off and they can therefore be used in rainwater harvesting systems. These roll top ridge and hip systems comprise of a 3m GRP roll<br />

profile suitable for use on both the ridge and hips with bespoke 3m fixing kits, including a new and unique omega bracket. The SwiftRidg+ kit includes<br />

an additional vent roll component to provide a ventilated option along the ridge in accordance with BS 5250 where required. To view the SwiftRidg and<br />

SwiftRidg+’s data sheet and installation recommendations, head over to www.hambleside-danelaw.co.uk, or contact a member of the team at:<br />

techelp@hambleside-danelaw.co.uk<br />

NEW ELEVATE BRANDED BROCHURES<br />

Following its rebrand, Elevate has launched a suite of newly designed brochures for installers and specifiers.<br />

Formerly known as Firestone Building Products, Elevate was launched in June last year and is now part of the Building Envelope<br />

division of parent company, Holcim. Featuring the Elevate branding, the new brochures detail the company’s long-established EPDM<br />

products, including RubberGard and RubberCover. Elevate RubberGard EPDM is a synthetic rubber single-ply membrane for flat and<br />

low slope roofs. Ideal for the commercial and industrial sectors, it is available in 1.1 and 1.5mm thickness. Designed for smaller<br />

residential flat roofs, Elevate RubberCover EPDM is for applications up to 150 sq m and is available in the same thicknesses as<br />

RubberGard EPDM. The new brochures outline the benefits of each product for installers and specifiers, providing installation advice, guidance on choosing the<br />

right system and details of Elevate’s support from concept to completion. Philip Moors, Managing Director of Elevate UK and Ireland, said: “Although our people,<br />

products and standards have all stayed the same since changing our name to Elevate, a lot of work has been done behind the scenes. This includes updating all<br />

our packaging and marketing materials. The new brochures are the next step in that process, highlighting our brand as well as the extensive benefits of Elevate’s<br />

EPDM roofing membranes for installers and specifiers working across sectors.” Downloaded the new brochures: https://www.holcimelevate.com/uk-en<br />

FEBRUARY <strong>2024</strong> TC 29

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!