225771-global spreader broch

Single-Lift
Ship-to-Shore
Spreaders
Bromma single-lift ship-to-shore telescopic spreaders are
known throughout the world for exceptional strength,
reliability, and long life. Bromma has sold nearly 4,000
telescopic spreaders through the years – most of which have
been single-lift units. This unmatched record of experience
is why downtime is usually quite low on Bromma spreaders,
and why availability rates often exceed 99%.
The Bromma SSX40 can single-lift 20' or 40' containers,
while the SSX45 can lift 45' containers as well.
Bromma spreaders have been designed and built for long,
reliable life in higher throughput environments and for
service on high-speed cranes.
Bromma ship-to-shore telescopic spreaders are feature-rich.
The SCS 2 Spreader Communications System reduces typical
spreader downtime in two ways – first, by preventing
downtime, and then by shortening downtime events when
they occur. The system prevents downtime through
TECHNICAL SPECIFICATIONS SSX40
LIFTING CAPACITY
WEIGHT
TELESCOPIC MOTION
GUIDE ARM SPEED
TWISTLOCK ROTATION
HYDRAULICS
POWER SUPPLY
AND CONSUMPTION
SURFACE
CONDITIONING
MANUALS
WARRANTY
twistlocks 41 tonnes ±10% eccentric loading
twistlocks 41 tonnes evenly loaded
lifting lugs 4 x 10 tonnes in end beam
8,7 tonnes
from 20' to 40' in 28 seconds
180° in 3-5 seconds
90° approximately in 1,0 seconds
system pressure 100 bar
400/230 V AC 50 Hz or otherwise as agreed
7,5 kW
sand-blasted SA 21 ⁄ 2; two coats of zinc-rich epoxy primer
and two coats of acrylic top coat
full service and repair manual supplied
one year
This specification is subject to alterations without prior notice.
5
improvements in the area of electrical connections (as much
as 35% of spreader downtime is electrical-related), and
shortens downtime through faster spreader fault
diagnostics. With SCS 2 you should experience fewer downtime
events, and when they occur, faster trouble-shooting
will eliminate, in many cases, the time and expense of a
spreader change-out.
The spreader has the capability to retract to the 19'6"
position in the event the spreader becomes jammed in the
ship’s twenty foot cell. Positioning to the 19'6" position can
be controlled by the operator if appropriate controls are furnished
in the crane cab. All spreaders fulfill the most
demanding design criteria among DIN, FEM and British
Standard. Bromma’s TTDS Twin-Twenty Detection System
(an excellent feature for single-lift spreaders as well) and
many other structural, mechanical, hydraulic and electrical
options are available; see your Bromma representative
for details.
TECHNICAL SPECIFICATIONS SSX45
LIFTING CAPACITY
WEIGHT
TELESCOPIC MOTION
GUIDE ARM SPEED
TWISTLOCK ROTATION
HYDRAULICS
POWER SUPPLY
AND CONSUMPTION
SURFACE
CONDITIONING
MANUALS
WARRANTY
twistlocks 41 tonnes ±10% eccentric loading
twistlocks 41 tonnes evenly loaded
lifting lugs 4 x 10 tonnes in end beam
9,6 tonnes
from 20' to 45' in approximately 30 seconds
180° in 3-5 seconds
90° approximately in 1,0 seconds
system pressure 100 bar
400/230 V AC 50 Hz or otherwise as agreed
7,5 kW
sand-blasted SA 21 ⁄ 2; two coats of zinc-rich epoxy primer
and two coats of acrylic top coat
full service and repair manual supplied
one year
This specification is subject to alterations without prior notice.