Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
By observing the following "DON'Ts” you will protect the continued safe and<br />
reliable operation of your <strong>Arriflex</strong>:<br />
DON'T run camera without film at high speeds.<br />
DON'T attempt to disassemble any part of the camera. This should be<br />
done by factory-trained personnel only.<br />
DON'T touch mirror shutter with fingers. Clean it only with soft camel hair<br />
brush. In any case, a spot on the mirror does not affect the picture.<br />
DON'T exchange covers of different camera (serial numbers are engraved<br />
on each coyer and camera).<br />
DON'T use old or shrunk film; the registration pin's stroke is adjusted to the<br />
perforation pitch of fresh film (0.2994) according to ASA specifications.<br />
DON'T allow cameras to be serviced by unqualified service shops. <strong>Arriflex</strong><br />
cameras require special knowledge and experience.<br />
DON'T neglect to have your camera serviced after approximately every<br />
200,000 ft., or every two years, whichever comes first. Service should be<br />
more frequent under adverse conditions.<br />
Our Service Department welcomes your inquiries and is anxious to help<br />
you with any problem or unforeseen requirements you might have.
Change language