Katalog PDF - JORNS-Modellbeleuchtung
Katalog PDF - JORNS-Modellbeleuchtung
Katalog PDF - JORNS-Modellbeleuchtung
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Katalog</strong> <strong>PDF</strong><br />
TEE FS-ALn 448/442 Roco HO, white LED lightingset<br />
Artikelnummer : 411<br />
08/2011<br />
Warm white LED-Lightingset for Roco TEE Aln448/442 FS trainsets “Mediolanum”, “Mont-Cenis” , "Lemano"<br />
and “Ligure” DC and AC power Analog or Digital mode LED colour : warm white The LEDs are distributed in<br />
such a way to obtain an uniform brightness at all windows from both cars May be used with AC or DC , in analog<br />
or digital mode, with a voltage range from 7 to 30 Volts. Power usage varies from about 5 to 20 mA, for each board,<br />
depending on the brightness level set. Boards are fitted with SMD components totaling 26 LEDs. The set is<br />
composed of 2 boards and some individual LEDs A potentiometer is fitted on each board to allow brightness<br />
control. The boards also have a second potentiometer to set the brightness in the engineer’s cabin independantly<br />
from the main lighting. Each board has a condensator to avoid fast blinking inherent in some Digital systems. In<br />
order to avoid reaming or cutting work, the engineer’s cabin is lit by individual stand alone LEDs. These LEDs are<br />
prewired to allow connection to the board. The prewired LEDs are part of the set. The boards replace the Roco<br />
cable supports. On the board there are some small holes to allow cable fastening with a thin wire.<br />
Mounting instructions with pictures available in English: Download <strong>PDF</strong><br />
€39.90<br />
TEE FS-ALn 448/442 Roco HO, yellow LED lightingset<br />
Artikelnummer : 412<br />
Yellow LED-Lightingset for Roco TEE Aln 442/448 FS trainsets “Mediolanum”, “Mont-Cenis” and “Ligure” DC<br />
and AC power Analog or Digital mode LED colour : yellow The LEDs are distibuted in such a way to obtain an<br />
uniform brightness at all windows from both cars May be used with AC or DC , in analog or digital mode, with a<br />
voltage range from 7 to 30 Volts. Power usage varies from about 5 to 20 mA, for each board, depending on the<br />
brightness level set. Boards are fitted with SMD components totaling 26 LEDs. The set is composed of 2 boards<br />
and some individual LEDs A potentiometer is fitted on each board to allow brightness control. The boards also<br />
have a second potentiometer to set the brightness in the engineer’s cabin independantly from the main lighting.<br />
Each board has a condensator to avoid fast blinking inherent in some Digital systems. In order to avoid reaming or<br />
cutting work, the engineer’s cabin is lit by individual stand alone LEDs. These LEDs are prewired to allow<br />
connection to the board. The prewired LEDs are part of the set. The boards replace the Roco cable supports. On<br />
the board there are some small holes to allow cable fastening with a thin wire.<br />
Mounting instructions with pictures available in English: Download <strong>PDF</strong><br />
€29.90<br />
TEE SBB-RAm and NS-DE.IV Roco Ho, white LED-Lightingset<br />
Artikelnummer : 410<br />
White LED-Lightingset for Roco H0 TEE RAm / DE IV trainsetsLighting set with 34 warm white LEDs for the<br />
Roco(*)<br />
TEE Diesel RAm-SBB and<br />
TEE Diesel DE IV-NS trainsets<br />
These trains ran the following TEE routes:<br />
- l'Oiseau Bleu from Paris to Anvers<br />
- l'Etoile du Nord from Paris to Amsterdam<br />
- l'Arbalète from Paris toZürich<br />
- Edelweiss from Zürich to Amsterdam, via Brussels, Luxembourg, Metz, Strasburg<br />
<strong>PDF</strong>_TXT_PAGE31/83