Katalog PDF - JORNS-Modellbeleuchtung
Katalog PDF - JORNS-Modellbeleuchtung
Katalog PDF - JORNS-Modellbeleuchtung
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Katalog</strong> <strong>PDF</strong><br />
White LED(12) lighting H0, brightness control, 22,5 cm<br />
Artikelnummer : 206<br />
08/2011<br />
White LED-lighting for model railway passenger coaches H0 12 LED, Length 22.5 cm (9.06") with<br />
antiblinking (capacitor) With smooth brightness control Brightness control is achieved by using a small<br />
potentiometer mounted on the bordLänge 22,5 cm, 12 LED's This lighting may only be used in digital mode Lighting<br />
unit with SMD technology The board has a length of 225 mm und is equipped with 12 LED's It can be cut at five<br />
marked places. The function of the remaining LED's is not impaired thereby. Reuse of offcuts is also possible, see<br />
at the end of this page.Length of 185 mm, 145 mm, 105 mm and 65 mm may be obtained. This means that:with a<br />
length of 185 mm the board has 10 LED'swith a length of 145 mm the board has 8 LED'swith a length of 105 mm<br />
the board has 6 LED'swith a length of 65 mm the board has 4 LED's Current feeding is possible at 8 different points<br />
distributed evenly on both sides on the circuit board. This makes an invisible cable laying possible in nearly all<br />
model carss. There are also 4 possible connection points for a capacitor. Board kann be cut with a fretsaw or a wire<br />
cutter. This lighting may only be used in digital modeLED colour: warm whiteblue soldering points = current feeding<br />
red soldering points = connection of an optional rear light (available on this site)green soldering points = capacitor<br />
connectionmax. voltage: 30 V AC or DC current draw: ~ 20 mA Offcuts resulting from board shortening may<br />
be reused by installing the following components: Offcuts components<br />
€13.90<br />
<strong>PDF</strong>_TXT_PAGE9/83