26HL86 32HL86 37HL86 LCD Color Television - Toshiba Canada
26HL86 32HL86 37HL86 LCD Color Television - Toshiba Canada
26HL86 32HL86 37HL86 LCD Color Television - Toshiba Canada
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Selecting the menu language<br />
You can choose from three different languages (English,<br />
French and Spanish) for the on-screen display of menus and<br />
messages.<br />
To select the menu language:<br />
1 Press Y and open the Set Up menu.<br />
2 Press B or b to highlight Language.<br />
3 Press C or c to display your desired language.<br />
4 Press O to close the Set Up menu.<br />
26<br />
Language<br />
TV/CABLE<br />
Ch Program<br />
Add/Erase<br />
Channel Labeling<br />
Video Label<br />
Set Up<br />
MENU Back EXIT Watch TV<br />
Chapter 5: Setting up your TV<br />
English<br />
TV<br />
ENTER<br />
Add<br />
ENTER<br />
1/2<br />
Programming channels into the<br />
TV’s channel memory<br />
When you press < or , on the remote control or TV control<br />
panel, your TV will stop only on the channels you program into<br />
the TV’s channel memory.<br />
Follow the steps below to program channels into the TV’s<br />
channel memory.<br />
Programming channels automatically<br />
Your TV can automatically detect all active channels in your<br />
area and store them in its memory. After the channels are<br />
programmed automatically, you can manually add or erase<br />
individual channels in the channel memory.<br />
Note:<br />
If the input signal type is set to CABLE for an antenna input,<br />
the automatic channel programming process erases<br />
channels that were previously programmed into the TV’s<br />
memory.<br />
If the input signal type is set to TV, the automatic channel<br />
programming process does NOT erase channels that were<br />
previously programmed into the TV’s memory, but adds<br />
newly found channels to the existing set of programmed<br />
channels. To remove a channel from the memory, you must<br />
manually delete it.<br />
To tune the TV to a channel not programmed in the channel<br />
memory, you must use the Channel Number buttons on the<br />
remote control.<br />
Programming channels for an antenna input configured for<br />
CABLE will take substantially longer than for an antenna<br />
input configured for TV. This is normal; however, once<br />
channel programming is completed, you should not have to<br />
repeat the programming process again unless your Cable<br />
TV service lineup changes significantly.<br />
To program channels automatically:<br />
1 Press Y and open the Set Up menu.<br />
2 Press B or b to highlight TV/CABLE.<br />
3 Press C or c to select either TV (if you use an antenna) or<br />
CABLE (if you use cable channels).<br />
Language<br />
TV/CABLE<br />
Ch Program<br />
Add/Erase<br />
Channel Labeling<br />
Video Label<br />
Set Up<br />
MENU Back EXIT Watch TV<br />
English<br />
CABLE<br />
ENTER<br />
Add<br />
ENTER<br />
1/2