Pressure Transmitter cerabar M PMP 46 cerabar M PMP 48

Instrument Configuration of Cerabar M with Aluminium Housing
display
holder for
display
process connection
PMP 46
e.g. with dairy
thread connection
raised cover
with sight glass
for display
low cover
electronic insert
housing
process connection
PMP 48
e.g. flange
process connection
PMP 48
e.g. with G 2 A thread
4
Displays
A display module can be used for
showing measured values and for
simplifying local operation. The display
is plugged onto the electronic insert
using a holder.
• Analogue display for Cerabar M with
analogue electronics: The analogue
display gives the current pressure
value related to the measuring range
in the form of a bar graph.
• Digital display for Cerabar M with
Smart electronics: The digital display
gives the pressure in the form of a
four-digit number. The appropriate
current value from 4…20 mA is shown
as a bar graph underneath.
• Digital display for Cerabar M with
PROFIBUS-PA electronics:
The digital display gives the pressure
in the form of a four-digit number. The
bar graph depicts the current pressure
value related to the measuring range.
Process Connections
• Process connections are available
with all common threads,
flush-mounted hygienic connections
and flanges (see summary, page 2).
• Chemical resistance can be
guaranteed by selecting suitable
materials for the process connection.
This applies especially to the metal
separating diaphragm of the
diaphragm seal in contact with the
medium.
• The diaphragm is welded to every
diaphragm seal with no dead volume.