Download MSDS of furfuryl alcohol - International Furan Chemicals BV
Download MSDS of furfuryl alcohol - International Furan Chemicals BV
Download MSDS of furfuryl alcohol - International Furan Chemicals BV
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EU SAFETY DATA SHEET<br />
according to Regulation (EC) N° 1907/2006 and 453/2010<br />
Furfuryl Alcohol<br />
Product characteristics<br />
Substance in preparation<br />
Amounts used<br />
Frequency and duration <strong>of</strong> use/exposure<br />
No L L<br />
Duration <strong>of</strong> activity 15 mins - 1 hour L L<br />
Human factors not influenced by risk management<br />
Other given operational conditions affecting workers exposure<br />
Place <strong>of</strong> use Outdoors L L<br />
Surface <strong>of</strong> skin exposed Two hands face (480 cm2) L L<br />
Technical conditions and measures at process level (source) to prevent release<br />
Technical conditions and measures to control dispersion from source towards the worker<br />
Local Exhaust Ventilation No L L L L<br />
Organisational measures to prevent /limit releases, dispersion and exposure<br />
Conditions and measures related to personal protection, hygiene and health evaluation<br />
Respiratory protection Respiratory protection is not used L L<br />
Eye protection Wear chemical goggles AL AL<br />
Gloves Wear chemically resistant gloves (tested to<br />
type EN374) with "basic" employee training<br />
[Dermal: 90%]<br />
AL AL<br />
Additional good practice advice beyond the REACH CSA<br />
*) The route <strong>of</strong> exposure (Inhalation, Dermal) and type <strong>of</strong> effect (Local, Systemic and Acute or Long term) for which the<br />
determinant has been used for exposure estimation are reported.<br />
2.2 Exposure estimation for Manufacturing <strong>of</strong> blends / formulations<br />
2.2.1. Exposure estimation for the environment (Manufacturing <strong>of</strong> blends/formulations)<br />
2.2.1.1. Environmental releases<br />
Table 1. Summary <strong>of</strong> the local releases to the environment<br />
Compartment Release factor<br />
estimation<br />
method<br />
Explanation / Justification<br />
Water Release rate Release factor after on site risk management (%): 0.4<br />
Local release rate (kg/day): 25<br />
Explanation/Justification:<br />
There is no company specific data available. The local release rate has<br />
been set to the maximum rate at which the local environmental risks are<br />
controlled.<br />
Air Other method<br />
(estimation)<br />
Release factor after on site risk management (%): 0.1<br />
Local release rate (kg/day): 6.25<br />
Explanation/Justification:<br />
There is no company specific data available. The 0.1% is an estimation<br />
based on the properties and use <strong>of</strong> the substance.<br />
Soil Other method Release factor after on site risk management (%): 0<br />
Version 004 Page 20 <strong>of</strong> 92<br />
2011-06-07
Change language