Download MSDS of furfuryl alcohol - International Furan Chemicals BV

EU SAFETY DATA SHEET
according to Regulation (EC) N° 1907/2006 and 453/2010
Furfuryl Alcohol
Control of workers exposure for "Transfer of formulations containing the substance" [PROC 8b]
Product characteristics
Substance in preparation Yes L L
Concentration of substance in product > 25% L L
Amounts used
Frequency and duration of use/exposure
Duration of activity 15 mins - 1 hour L L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L L
Inhal*) Derm*)
Loc Sys Loc Sys
Surface of skin exposed Two hands face (480 cm2) L L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation No L L L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection is not used L L
Gloves Wear chemically resistant gloves (tested to
type EN374) with "basic" employee training
[Dermal: 90%]
AL AL
Eye protection Wear chemical goggles AL AL
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the
determinant has been used for exposure estimation are reported.
Control of workers exposure for "Manufacturing of moulds " [PROC 14]
Product characteristics
Inhal*) Derm*)
Loc Sys Loc Sys
Substance in preparation Yes L L L L
Concentration of substance in product 1 - 5% [Inhalation: 80%; Dermal: 80%] L L L L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L L
Version 004 Page 55 of 92
2011-06-07