Engine Air Cleaners, Intake Accessories and ... - Giro Servicios CA

Horizontal, In-Line Moisture Skimmer
Removes Water from Intake System
Applications
Allows 600 to 1200 cfm airflow
Horizontal mount in engine air
intake ducting
Features
Removes over 80% of water before it
can reach and damage the filter
No service needed!
Made of durable rubber
Collected water is automatically
released by Vacuator Valve
Adds little or no restriction to airflow
Common inlet sizes fit most
installations
Part CFM Inner Dia. Length Tube Stops
Number (A) (B) (C) (D)
in mm in mm in mm in mm
X005822 600-1000 6.00 152 6.00 152 1.25 32 1.37 35
X005900 800-1200 7.00 178 6.00 152 1.25 32 1.37 35
X005901* 800-1200 7.00 178 6.00 152 1.25 32 1.37 35
*Angled spout
Stack-Top Moisture Eliminator
Prevents Water Problems in Air Intake System
For cabover trucks, on/off
road, mounted on top of
7" (178mm) O.D. intake
stack
For airflow range of 600
to 1200 cfm
Over 80% water removal
efficiency
Includes clamp for
installation
X003691
Moisture Skimmer &
Moisture Eliminator
Mounting Position
www.donaldson-filters.com Engine Air Cleaners, Accessories & Service Parts 67
4
How It Works
(1) Moisture-filled air enters the moisture
eliminator cap.
(2) Built-in, stationary vanes cause the air to spin.
(3) Moisture is forced to the outside wall, where
it separates from the air and collects.
(4) Water drains out through the drain hole.
(5) As a result, drier air (acceptable for maximum
filter life and engine performance) passes to
the air cleaner.
2
3
1
Intake Accessories