You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SteppIR</strong> <strong>Antennas</strong> - BigIR 15<br />
Installing the 80m Coil to an existing BigIR<br />
The 80m coil back plate will have 4 of its 8 holes that will align with 4 of the holes in your<br />
element housing unit (EHU).<br />
Remove the 4 bolts already in these 4 holes.<br />
Install the new bolts, spacers and coil to your element housing and tighten the new Nylok<br />
nuts as shown in (Figure 45 & Figure 47).<br />
4 SS bolts with<br />
Nylok nuts<br />
Figure 45<br />
4 Nylon Spacers<br />
Figure 47