+44 (0) - Holden Vintage and Classic Car Parts

Recommendations

Info

14 FUEL MONZA 2”–Thread size 2” x 18 TPI: Chrome plated brass 015.184 £41.63 each | £36.20 ex VAT Light alloy 015.181 £44.28 each | £38.50 ex VAT 2 1 ⁄2”–Thread size 2 1 ⁄2” x 16 TPI: Chrome plated brass 015.185 £50.60 each | £44.08 ex VAT Light alloy 015.182 £52.90 each | £46.00 ex VAT 2 3 ⁄4”–Thread size 2 3 ⁄4” X 16TPI: Chrome plated brass 015.186 £56.35 each | £49.00 ex VAT Light alloy 015.183 £59.80 each | £52.00 ex VAT BRASS COLLARS For soldering to the filler pipe of your tank: For 2” filler caps and filler pipes of 1 3 ⁄4 in diameter 015.103 £10.33 each | £8.98 ex VAT For 2 1 ⁄2” filler caps and filler pipes of 2 1 ⁄4” diameter 015.104 £12.33 each | £10.72 ex VAT For 2 3 ⁄4” filler caps and filler pipes of 2 1 ⁄2” diameter 015.105 £15.23 each | £13.24 ex VAT FLIP TOP FILLER CAP Chrome finish, complete with 51mm (2”) diameter filler neck. Lift catch to open, not lockable. Suits Triumph Spitfire Mk I–IV and TR6 but can be used on other cars 015.240 £44.85 each | £39.00 ex VAT ALLOY COLLARS For welding to the aluminium filler pipe of your tank: For 2” filler caps and filler pipes of 2 in diameter 015.106 £7.94 each | £6.90 ex VAT For 2 1 ⁄2” filler caps and filler pipes of 2 1 ⁄2” diameter 015.107 £8.28 each | £7.20 ex VAT For 2 3 ⁄4” filler caps and filler pipes of 2 3 ⁄4 “ diameter 015.108 £9.20 each | £8.00 ex VAT Order lines open 8.30am - 5.00pm Mon - Fri +44 (0) 1885 488 488 Originally made in the 30s these Filler Caps will always be associated with famous competition cars of the sixties and they do not look out of place on more modern machinery. The caps are supplied in vented form but the small vent hole can be closed up if desired. The Aston is supplied with a quick release action or in 3.5” form with a roller catch. The smoother looking Monza has a snap action. Both caps can also be used on oil tanks, rocker covers etc. ASTON 2 1 ⁄2”–Thread size 2 1 ⁄2” x 16 TPI: Chrome plated brass 015.195 £50.60 each | £44.00 ex VAT Light alloy 015.189 £52.90 each | £46.00 ex VAT 2 3 ⁄4”–Thread size 2 3 ⁄4” x 16 TPI: Chrome plated brass 015.196 £56.35 each | £49.00 ex VAT Light alloy 015.190 £59.80 each | £52.00 ex VAT LOCKING FILLER CAP Chrome finish, complete with 51mm (2”) diameter filler neck. Suits Triumph TR3, TR4, TR5, TR6 but can be used on other cars 015.241 £40.25 each | £35.00 ex VAT FILLER CAPS CHROME FLANGES For bolting to your tank: For 2” filler caps 015.109 £20.70 each | £18.00 ex VAT For 2 1 ⁄2” filler caps 015.110 £25.30 each | £22.00ex VAT For 2 3 ⁄4” filler caps 015.111 £29.90 each | £26.00 ex VAT ALLOY FLANGE For the 3 1 ⁄2” Aston filler cap 015.112 £33.93 each | £29.50 ex VAT LOZENGE SHAPE FILLER CAP Chrome finish, complete with mild steel filler neck. Lockable, two keys supplied. As used on Morgans etc. With 51mm (2”) diameter filler neck 015.242 £67.85 each | £59.00 ex VAT With 57mm (2 1 ⁄4”) diameter filler neck 015.243 £62.10 each | £54.00 ex VAT ASTON WITH ROLLER CATCH 3 1 ⁄2”–Thread size 3 1 ⁄2” BSP. Light alloy only 015.193 £171.64 each | £149.25 ex VAT The filler caps shown here need to be fitted using either a collar, flange or flange with funnel as detailed below: ALUMINIUM FLANGE WITH FUNNEL For bolting to the bodywork. Connection to tank is then by rubber hose indicated: For 2” Monza filler cap with 2” hose 015.101 £39.74 each | £34.56 ex VAT For 2 1 ⁄2” filler caps with 2 or 2 1 ⁄4” hose 015.113 £48.30 each | £42.00 ex VAT For 2 3 ⁄4” filler caps with 2, 2 1 ⁄4 or 2 1 ⁄2” hose 015.114 £50.60 each | £44.00 ex VAT For the 3 1 ⁄2” Aston filler cap with 2, 2 1 ⁄4 or 2 1 ⁄2 “ hose 015.115 £57.39 each | £49.90 ex VAT LOCKABLE INSERT To use with flange/funnels 015.113, 015.114 & 015.115. Vented. This provides a secondary lock beneath the filler caps which cannot be seen from the outside 015.122 £27.60 each | £24.00 ex VAT
Website open 24hrs everey day www.holden.co.uk FILLER CAPS FUEL These filler caps look like the Monza and Aston on the previous page but they incorporate a lock and are specifically designed for Minis, or if your car has the same 63.5mm (2 1 ⁄2”) diameter filler neck as a Mini then they can be fitted. For use with the original Mini tank pipe fittings where a push-in-and-twist-to-lock cap is normally used. They fit over the end of the filler neck and are then rotated to the desired position and secured with three grub screws and Allen key supplied. The lockable insert then fits into the cap ring and locks on to your filler neck as did the original. MONZA LOCKING CAP Chrome plated on brass 015.188 £81.47 each | £70.84 ex VAT Polished aluminium 015.187 £83.77 each | £72.84 ex VAT MINI STAINLESS STEEL CAP For use with the original Mini tank pipe fittings where a push-in-and-twist-cap is normally used. It replaces the original cap. Made in stainless steel, it has a knurled edge for easy grip when turning and a built-in vent valve. Also fits MGA, MGB, MGC and Midget 015.372 £10.29 each | £8.95 ex VAT FILLER CAP 2“ dia, 3” PCD fixing holes in flange, with integral funnel for 2/2 1 ⁄4” internal diameter hose. Non locking 015.120 £86.83 each | £75.50 ex VAT Locking version, as shown 015.121 £98.33 each | £85.50 ex VAT THREADED RING Ring incorporating captive nuts for Aero filler caps. 015.251 £12.78 each | £11.11 ex VAT MINI ALLOY ASTON LOCKING CAP Polished aluminium. Also fits MGA, MGB, MGC, Midget and Sprite etc. 015.192 £73.07 each | £63.54ex VAT MINI STAINLESS STEEL LOCKING CAP For use with the original Mini tank pipe fittings where a push-in-and-twist-cap is normally used. It replaces the original cap. Made in stainless steel and supplied with two keys. Also fits MGA, MGB, MGC and Midget 015.370 £11.44 each | £9.95 ex VAT AERO FILLER CAPS FILLER CAP 3” dia, 4” PCD fixing holes in flange. Non locking 015.116 £86.83 each | £75.50 ex VAT Locking version as shown 015.117 £98.33 each | £85.50 ex VAT RUBBER GASKET Thicker than the standard one and conical in shape. 015.250 £8.05 each | £7.00 ex VAT CHROME ASTON LOCKING CAP A special version of the Aston filler cap which is beautifully made in brass and chrome plated. It locks on to close the filler neck and is then removed in one piece to put the petrol in 015.197 £81.47 each | £70.84 ex VAT Beautifully made in silver anodised aluminium, these caps grace the flanks of the world’s most exclusive high performance cars. They bolt to bodywork with funnel or direct to tank. Supplied with 1 gasket & plated nuts & bolts. This type of filler cap is particularly suitable for use in kit cars as it is flush mounting therefore complying with the S.V.A. Regulations. MINI MINI DOMED LOCKING CHROME PLATED For use with the original Mini tank pipe fittings where a push-in-and-twist-cap is normally used. It replaces the original cap. Chrome plated and supplied with two keys. Overall diameter 80mm. Also fits MGA, MGB, MGC and Midget 015.371 £18.34 each | £15.95 ex VAT FLANGED FUNNEL & GASKET For 51mm (2”) internal diameter hose 015.118 £27.60 each | £24.00 ex VAT FLANGED FUNNEL & GASKET For 57mm (2 1 ⁄4”) internal diameter hose 015.119 £28.75 each | £25.00 ex VAT 15
Page 1 and 2: £2.00 Dec 08
Page 3 and 4: Website open 24hrs every day www.ho
Page 5 and 6: Website open 24hrs every day www.ho
Page 7 and 8: Website open 24hrs everey day www.h
Page 13: Website open 24hrs everey day www.h
Page 65 and 66:
Website open 24hrs everey day www.h
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
show all

+44 (0) - Holden Vintage and Classic Car Parts

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?