+44 (0) - Holden Vintage and Classic Car Parts

Recommendations

Info

32 GAUGES 1 ⁄8” NPTF TEMP SENDER Temperature Sender threaded 1 ⁄8" NPTF (27 t.p.i.) suitable for use with electrical oil & water temperature gauges. Fits MG's, Triumph Spitfire. Reliant Scimitar (to 1976), Hillman Imp etc, or into 'T' Piece adaptors 070.016 £15.55 each £13.52 ex VAT WIRING DIAGRAM FOR SMITHS CLASSIC GAUGES 1 ⁄8” NPTF OIL PRESSURE SENDER Oil Pressure Sender threaded 1 ⁄8" NPTF (27 t.p.i.) suitable for up to 100lbs per square inch gauges. Screws directly into block on some engines, including MG's, Triumph Spitfire, Reliant Scimitar (to 1976), Hillman Imp etc. or screws into 'T' Pieces or adaptors 070.258 or 070.259 070.185 £37.40 each | £32.52 ex VAT FITTINGS FOR SMITHS GAUGES - SENDERS 5 ⁄8” UNF TEMP SENDER Temperature Sender threaded 5 ⁄8" UNF (18 t.p.i.) suitable for use with electrical oil & water temp gauges 070.017 £15.55 each £13.52 ex VAT For use with Oil Pressure and Dual Gauges 1 ⁄4” BSP OIL PRESSURE SENDER Oil Pressure Sender threaded 1 ⁄4" BSP (19 t.p.i.) suitable for up to 100lbs per square inch Gauges. Screws directly into block on some engines. 070.186 £49.54 each | £43.08 ex VAT 5 ⁄8” UNF TEMP SENDER INSULATED Temperature Sender threaded 5 ⁄8” UNF (18 t.p.i.) with separate insulated earth return for use with housings 080.879 to 080.883 which fit into a radiator hose 070.020 £15.81 each £13.75 ex VAT Order lines open 8.30am - 5.00pm Mon - Fri +44 (0) 1885 488 488 1 ⁄2” UNF OIL PRESSURE SENDER Oil Pressure Sender threaded 1 ⁄2" UNF (20 t.p.i.) suitable for up to 100lbs per square inch gauges. Screws directly into block on some engines, including Land Rover V8 and Range Rover. 070.187 £49.54 each | £43.08 ex VAT 5 ⁄8” UNF TEMP SENDER FOR MINI & MGB Temperature Sender threaded 5 ⁄8” UNF (18 t.p.i.), with brass body. Fits Mini 998cc & MGB 1976+ for use with the original gauge on the car 070.047 £8.63 each £7.50 ex VAT Picture coming soon 5 ⁄8” UNF TEMP SENDER FOR TRIUMPHS Temperature Sender threaded 5 ⁄8” UNF (18 t.p.i.) with brass body. Fits Triumph TR2/3/3A/4/4A for use with the original gauge on the car 070.048 £8.63 each £7.50 ex VAT
Website open 24hrs everey day www.holden.co.uk GAUGES FITTINGS FOR SMITHS GAUGES - ADAPTORS & OIL PIPE Mechanically operated temperature gauges come fitted with a flexible capillary tube leading to a copper bulb. There are two types but both are fitted with an adaptor which provides a 5⁄8” UNF male thread for screwing into the block 070.044 070.043 11mm 10mm 5 ⁄8” UNF 5 ⁄8” UNF WATER TEMP ADAPTOR 5 ⁄8" UNF male thread and a 5 ⁄8" UNF female thread to suit sender 070.017 070.044 £6.33 each | £5.50 ex VAT 070.025 comes complete with 070.031 Adaptor 5 ⁄8” UNF 36mm Copper Washer here Flexible tube to gauge 33mm 57mm Flexible tube to gauge 5 ⁄8” UNF MECHANICAL WATER TEMP ADAPTOR This has a 5 ⁄8" UNF male thread to screw into the block and a 3 ⁄8" BSP thread for the nut on the end of the capillary tube. 070.043 £6.33 each | £5.50 ex VAT OIL PIPE FOR MECHANICAL GAUGES For use between the mechanical oil pressure gauge and adaptor 070.031 1.5 metres long 070.024 £7.48 each | £6.50 ex VAT 3.0 metres long 070.025 £14.89 each | £12.96 ex VAT 3 ⁄8” BSP OIL PRESSURE ADAPTOR This has a female thread into which you can fit oil pressure adaptor 070.031 or oil pressure sender 070.185 070.259 £6.33 each | £5.50 ex VAT 5 ⁄8” UNF MECHANICAL OIL PRESSURE ADAPTOR This adaptor has a 5 ⁄8" UNF male thread and a female thread into which you can fit oil pressure adaptor 070.031 or oil pressure sender 070.185 070.258 £5.91 each | £5.14 ex VAT 3 ⁄8” BSP WATER TEMP ADAPTOR 3 ⁄8" BSP male thread and a 5 ⁄8" UNF female thread to suit sender 070.017. 070.257 £6.33 each | £5.50 ex VAT 1 ⁄8" NPTF OIL PRESSURE ADAPTOR Straight adaptor 1 ⁄8" NPTF (27 t.p.i.) each side. 070.031 £4.03 each | £3.50 ex VAT OIL PIPE FOR MECHANICAL GAUGES 1170mm long (black) for use between the mechanical oil pressure gauge and adaptor 070.031 070.365 £11.21 each | £9.75 ex VAT Enables you to fit a mechanical or electrical gauge and retain your original oil pressure switch. These adaptors fit in place of your original oil pressure switch which is then screwed into the end of the adaptor. The side take-off is tapped 1 ⁄8" NPTF (27 t.p.i.) into which you can fit oil pressure adaptor 070.031 for mechanical gauges or oil pressure sender 070.185 for electrical gauges Size Car makes Part No. Price 1 ⁄4”x18 NPT FITTINGS FOR SMITHS GAUGES - T PIECE ADAPTORS Fords, Reliant Scimitar & SS1, Saab 250 & 95, Vauxhall Carlton, Viceroy, Viva HC (post 76) Chevette, Royale, Cavalier, Viva HA & HB (exc 1600), GT, HC (pre 76) Firenza, Magnum 2.3L, VX 1800/2300 (76 on) VX 4/90 FD & FE, Victor FE, Viva 1600, Firenza 1600, 1800 & 2000, Victor Ventora FD (The thread sizes given here are the male threads that screw into the block) 070.026 £6.33 each | £5.50 ex VAT 3 ⁄8” BSF Land Rover (not V8), Rover P6, 2000, 2200 070.027 £6.33 each | £5.50 ex VAT 1 ⁄8”x27 NPTF Mini, MG’s, Triumph Spitfire, Reliant Scimitar (to 1976), Hillman Hunter, Avenger & Imp, DAF 33 & 44, Saab 99 & 900 etc. 070.033 £6.33 each | £5.50 ex VAT 1 ⁄8”x28 BSPT Triumph TR7 070.250 £6.33 each | £5.50 ex VAT 1 ⁄2” UNF Land Rover V8, Range Rover, Jaguar 6 cyl 070.251 £6.33 each | £5.50 ex VAT 33
Page 1 and 2: £2.00 Dec 08
Page 3 and 4: Website open 24hrs every day www.ho
Page 5 and 6: Website open 24hrs every day www.ho
Page 7 and 8: Website open 24hrs everey day www.h
Page 31: Website open 24hrs everey day www.h

+44 (0) - Holden Vintage and Classic Car Parts

Create successful ePaper yourself

Delete template?

Save as template?