+44 (0) - Holden Vintage and Classic Car Parts
+44 (0) - Holden Vintage and Classic Car Parts
+44 (0) - Holden Vintage and Classic Car Parts
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Website open 24hrs everey day<br />
www.holden.co.uk<br />
INERTIA REEL<br />
E Marked by SECURON. The top<br />
fitting mounts on the 'B' post, the<br />
inertia reel at floor level below this.<br />
With stalk 150mm long suitable for<br />
mounting direct to the seat (if you have<br />
that type of seat) or to the side of the<br />
transmissiion tunnel or side sill<br />
090.452 £52.44 each | £45.60 ex VAT<br />
CHILDRENS HARNESS<br />
For approximate ages 4 to 9 years,<br />
with fitting kit for all car types<br />
090.444 £28.18 each £24.50 ex VAT<br />
SEAT BELTS<br />
ANGLE ADJUSTABLE<br />
INERTIA REEL<br />
E Marked by SECURON. Designed for<br />
2 door cars without door pillars or in<br />
the rear of the car for the rear seats.<br />
The reel can be mounted at an angle.<br />
Length of webbing is 2.6 metres. With<br />
stalk 150mm long suitable for<br />
mounting direct to the seat (if you have<br />
that type of seat) or to the side of the<br />
transmissiion tunnel or side sill<br />
090.442 £66.70 each | £58.00 ex VAT<br />
ANGLE ADJUSTABLE<br />
INERTIA REEL<br />
E Marked by SECURON. Designed for<br />
2 door cars without door pillars or in<br />
the rear of the car for the rear seats.<br />
The reel can be mounted at an angle.<br />
Length of webbing is 2.6 metres. With<br />
stalk 300mm long suitable for<br />
mounting at floor level 090.443<br />
£66.70 each | £58.00 ex VAT<br />
SEATS & BELTS<br />
INERTIA REEL<br />
E Marked by SECURON. The top<br />
fitting mounts on the 'B' post, the<br />
inertia reel at floor level below this.<br />
With stalk 300mm long suitable for<br />
mounting at floor level 090.452L<br />
£52.44 each | £45.60 ex VAT<br />
CLASSIC TYPE 3 POINT<br />
Static operation with chromed release<br />
buckle. Requires two eyebolts at floor<br />
level, refer to Part No. 090.447 or Part<br />
No. 090.448 <strong>and</strong> stress plates Part No.<br />
090.450 (see previous page), <strong>and</strong> is<br />
bolted in at shoulder level. If you don't<br />
have a fitting already in your car you<br />
will need a tapped plate to complete<br />
the installation 090.451<br />
£143.75 each | £125.00 ex VAT<br />
SECURON 3-POINT INERTIA REEL<br />
Two belts fix either side of the seat <strong>and</strong> then buckle up over the abdomen. From<br />
each of these belts are two more, that go over each shoulder <strong>and</strong> join to an inertia<br />
reel, allowing you to lean forward to operate switches etc. The reel is angle<br />
adjustable <strong>and</strong> can go on floor or bulkhead. In front of this reel is another buckle,<br />
allowing you to break the seat belt at this point, as required on sports cars like<br />
the Alfa Giulietta for raising <strong>and</strong> lowering the hood (top). Colour black<br />
092.600 £67.85 each | £59.00 ex VAT<br />
51