Final program, part II - GAMM 2012 - Technische Universität Darmstadt

Section 3: Damage and fracture mechanics 55
17:40 – 18:00: A. Ekhlakov (Universität Siegen), Oksana M. Khay (Universität Siegen, Pidstryhach
Institute for Applied Problems of Mechanics and Mathematics Lviv),
Chuanzeng Zhang (Universität Siegen): BEM for transient thermoelastic analysis
of a functionally graded layer on a homogeneous substrate under thermal
shock
S3.5: Different advanced aspects in damage modeling Thu, 13:30–15:30
Chair: Maksim Zapara, Vladimir Shneider S1|03–116
13:30 – 13:50: Maksim Zapara (TU Berlin), Nikolai Tutyshkin (Universität Tula, Russia),
Wolfgang H. Müller, Ralf Wille (TU Berlin): Strain induced damage of ductile
materials under compression
13:50 – 14:10: An Danh Nguyen, Marcus Stoffel, Dieter Weichert (RWTH Aachen): Investigation
of gradient-enhanced damage evolution in viscoplastic plates under propagating
disturbance
14:10 – 14:30: Volker Hardenacke, Jörg Hohe (Fraunhofer IWM Freiburg): Enhancement of
the micro mechanical basis for local approach cleavage models
14:30 – 14:50: D.K.Teslenko, V.P.Shneider, Yu.A.Chernyakov (Dnepropetrovsk National University):
Marciniak-Kuczynski type modelling of the effect of complex loading on
the forming limits of sheet metal
14:50 – 15:10: Zolkiewski Slawomir (Silesian University of Technology): Mechanical properties
of hybrid composites made of a steel plate and a laminate connected with
screw rivets
15:10 – 15:30:
(new talk):
Matthieu Dunand, Dirk Mohr (MIT and École Polytechnique): Predicting ductile
fracture under multi-axial loading: comparison of modified Mohr-Coulomb
with shear modified Gurson model